Categories
There are 2995 products.
€0.50
€2.00
Washer at the end of the clutch transmitter and receiver pipe
Reference : 9160
En stock
Ref Renault: 7903053215 / 6000002007 Ref Simca: 23168Z
€1.20
€14.50
Screw-in coupling for clutch transmitter or receiver pipe M12x100
Reference : 9150
En stock
Renault ref: 7866038000 / 6000002006
Ref Simca: 23408T
Ref Simca: 23408T
€7.50
Set of side shims (large bearings) - Thickness 3.10mm (repair dimension + 0.25mm)
Reference : 6083
En stock
€14.00
€17.00
€9.00
€23.00
€1.00
Single circuit master cylinder Ø19mm (4 outlets: 1 outlet in Ø7/16" - 20UNF and 3 outlets in Ø3/8" - 24UNF)
Reference : 4L-429
En stock
- For long master cylinder push rod - Piston depth 38mm
€77.00
€64.00
Original right exterior mirror in black plastic "Cipa" - 4L (after 1983)
Reference : 4L-941
En stock
Dimension 170x113mm, fixing center distance 66mm
€44.00
Original left exterior mirror in black plastic "Cipa" - 4L (after 1983)
Reference : 4L-942
En stock
Dimension 170x113mm, fixing center distance 66mm
€44.00
Original exterior mirror - Right or Left in satin black plastic "Cipa" - 4L Fourgonnette
Reference : 4L-943
En stock
Fixing center distance: 65mm
€48.00
Original interior rearview mirror to stick with "Cipa" granulated black metal case
Reference : 5923
En stock
- Dimensions: 60mmx190mm
- Round stem 40° inclination
- To be mounted with adhesive base reference 5924
- Round stem 40° inclination
- To be mounted with adhesive base reference 5924
€39.00
Interior mirror base with adhesive fixing pad
Reference : 5924
En stock
Special adhesive pad for glass material
€6.00
Original gearbox synchro type 334 - R4 / Rodeo - ref 0428818600
Reference : 4L-112
En stock
Limited Quantity Genuine Parts
€19.00
Spark plug wire harness - 8 wires (Ducellier distributor) - A310.6
Reference : 7734
En stock
6 spark plug wires and 2 coil wires
€96.00
€152.00
Rear left wheel cylinder Ø 22mm (oblique exit) - R12.TS - ref 7701365401 / 7701024261
Reference : 8426
En stock
Hose thread: 3/8"x24UNF (outgoing cone)
Fixing distance: 31.75mm
Fixing distance: 31.75mm
€14.00
Right rear wheel cylinder Ø 22mm (oblique exit) - R12.TS - ref 7701365402 / 7701024262
Reference : 8425
En stock
Hose thread: 3/8"x24UNF (outgoing cone)
Fixing distance: 31.75mm
Fixing distance: 31.75mm
€14.00
€72.00
€3.50
€2.50
Rear brake distributor - R5 / Super 5 GT Turbo (Phase 1 and 2) - ref 6001007399 / 7701349735
Reference : 5431
En stock
- 2 connectors in M12X100 and 2 connectors in M10x100
€72.00
€7.00
€16.00
€15.50
€30.00
€19.00
€50.00
€10.50
€38.00
€15.50
€15.50
€38.00
€17.50
€16.00
€98.00
€5.00
€70.00
€254.00
Set of connecting rod bearings (Large levels) Ø43.23mm - Repair dimension (+0.75)
Reference : 6001
En stock
Width : 17.15mm
€39.00
Set of crankshaft main bearings Ø54.05mm (Large levels) - Repair dimension (+0.75mm)
Reference : 6002
En stock
€52.00
€2.50
Kit of 2 spring pins Ø6mm for door hinge (Front and Rear) and front bonnet - Ref 7703067177
Reference : 4L-944
En stock
€2.50
Complete air box with filter for ZENITH 32 or SOLEX 32 carburetor - Ref 7700727407
Reference : 4L-945
En stock
- External Ø: 320mm
- Interior Ø: 260mm
- Ø Air inlet: 50mm
- Total height: 87mm
- Interior Ø: 260mm
- Ø Air inlet: 50mm
- Total height: 87mm
€22.00
Kit of 8 upper valve retainer cups (1100cc and 1300cc engine) - Ref 0003814700 (38147)
Reference : 4033
En stock
Compatible with :
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
€248.00
Kit of 8 valve spring washers (Engine 1108cc and 1300cc) - Ref 0003812600 (38126)
Reference : 4035
En stock
Compatible with :
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
€59.00
Kit of 16 valve spring washers (1400cc engine) - Ref 7703053261 (8 pieces) and Ref 7703053158 (8 pieces)
Reference : 5008
En stock
€98.00
Kit of 16 valve spring washers (1600cc engine) - Ref 0608420800 (8 pieces) and Ref 7700524534 (8 pieces)
Reference : 6003
En stock
Thickness 1mm
Compatible with 1565cc to 1647cc engines (Type 807 844 and 843):
- A110 1600S/SC/SX
- A310 1600cc
- R12G / R17G
- R16.TS/TX
Compatible with 1565cc to 1647cc engines (Type 807 844 and 843):
- A110 1600S/SC/SX
- A310 1600cc
- R12G / R17G
- R16.TS/TX
€98.00
Camshaft end washer (1108cc / 1300cc / 1400cc engine) - Ref 0608441400
Reference : 6004
En stock
Compatible with :
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 and 2 (1397cc)
- R12.TS (1289cc)
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 and 2 (1397cc)
- R12.TS (1289cc)
€18.00
Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200
Reference : 5009
En stock
Compatible avec :
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
€12.00
Oval camshaft stop plate (1600cc engine)
Reference : 6005
En stock
Compatible with 1565cc to 1647cc engines (Type 807 844 and 843):
- A110 1600S/SC/SX
-A310 1600cc
- R12G / R17G
- R16.TS/TX
- A110 1600S/SC/SX
-A310 1600cc
- R12G / R17G
- R16.TS/TX
€12.00
Set of 4 Ø65mm liners and pistons with segments and pins (complete set) - R5.TL after 1972 (956cc engine, Type 689.10)
Reference : 5007
En stock
€369.00
€37.00
€0.80
€0.80
€0.50
Secondary shaft biconical bearing - Box 369-09 / 369-10 / 369-15 / NG5 - Ø 28x68x45.4mm - Ref 7703090245
Reference : 5141
En stock
€166.00
Oil seal on timing side - 40x55x7 (Engine 807-25 with casing ref 7700501663)
Reference : 6069
En stock
€10.00
Roller bearing on pinion shaft / bevel gear - box 367 / 369 - Ø43x80x24mm - Ref 7703090117
Reference : 7113
En stock
€216.00
€11.00
Complete engine gasket set (cylinder head gasket Ø76.7mm standard thickness) - 1200S
Reference : 9095
En stock
€72.00
Courroie de pompe à eau et d'alternateur (13x1060) - Simca 1000 / 1000R / R1 / R2 / R3 / 1200S / CG - Réf 22100Z
Reference : 9096
En stock
€11.00
Front brake pad (Girling assembly) - R5 Alpine Turbo (122B) - Ref 7701202974
Reference : 5432
En stock
€24.00
€5.00
Joint papier entre bride et pied d'admission Weber 40DCOM - Peugeot 205 / AX sport
Reference : BR204
En stock
€6.00
€12.00
€8.00
Washer under cylinder head screw M10x2.2mm thick - Engine 1400 / R5 Alpine (1223) - Ref 7703053294
Reference : 5095
En stock
€4.20
Washer under cylinder head screw M12x2.2mm thick (1600cc engine) - Ref 7700511730
Reference : 6084
En stock
Compatible with 1565cc to 1647cc engines (type 807, 844, 843):
- A110 1800cc
- A310 1600cc
- R12G / R17G
- R16.TS / TX
- A110 1800cc
- A310 1600cc
- R12G / R17G
- R16.TS / TX
€4.20
Front right brake caliper Ø 48mm for mounting "Big brakes" (Bendix mounting)
Reference : 6417
En stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front brake: R16.TS
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front brake: R16.TS
€232.00
Front right brake caliper Ø 48mm for mounting "Big brakes" (Bendix mounting)
Reference : 6416
En stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front brake: R16.TS
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front brake: R16.TS
€232.00
€25.00
€25.00
Upper spacer between Weber 45DCOE carburetor - Ref 7700554764
Reference : 6873
Ce produit est actuellement indisponible à la vente
€7.00
€0.80
€0.80
Carriage screws (for fenders) with integrated washer - Ø6.3x17 (white zinc color)
Reference : 8917
En stock
€0.90
Body screws (for the fenders) - Ø6.3x17 (yellow zinc color) - Ref 0607273300
Reference : 8919
En stock
€0.90
€1.20
€1.20
€0.50
€18.00
Exhaust manifold gasket (F7P/ F7R engine) - Clio williams / spider / Megane 2L 16s ref 7700858384
Reference : WIL02
En stock
€18.00
€24.00
€8.00
€12.00
€18.00
€8.00
€8.00
1st synchro (9° outer cone) - Gearbox 330 / 352 / 353 / 364 / 365 - Ref 0428406100
Reference : 4163
En stock
Suitable for the following gearboxes:
- gearboxes 330 / 353-03 / 353-13 / 353-33
- gearboxes 364-05 / 364-06
- gearboxes 330 / 353-03 / 353-13 / 353-33
- gearboxes 364-05 / 364-06
€42.00
1st synchro (9° outer cone) - Gearbox 330 / 352 / 353 / 364 / 365 - Ref 0428406100
Reference : 4162
En stock
Suitable for the following gearboxes:
- gearboxes 330 / 353-03 / 353-13 / 353-33
- gearboxes 364-05 / 364-06
- gearboxes 330 / 353-03 / 353-13 / 353-33
- gearboxes 364-05 / 364-06
€42.00
€12.00
€225.00
Domed headlight lens for mounting with original bulb socket
Reference : 1799
En stock
Cibié-type superior quality
€72.00
Curved headlight optics for fitting with original European code bulb
Reference : 1798
Ce produit est actuellement indisponible à la vente
Cibié-type superior quality
€78.00
Synchro of 3rd and 4th for ball locking - Box 365 - Ref 7700555558
Reference : 6122
En stock
Suitable for the following gearbox:
- Gearbox 365-05 / 365-10 / 365-14 / 365-20 / 365-24 / 365-33
- Gearbox 365-05 / 365-10 / 365-14 / 365-20 / 365-24 / 365-33
€59.00
€4.00
Ducellier 4375 igniter with vacuum capsule and integrated 12V electronic ignition kit
Reference : 4793
Ce produit est actuellement indisponible à la vente
Suitable for:
- R4 - R6 - R8 - Caravelle - Matra jet - R12.TL - R12.TS - R15.TL - A110.V85 (810) - A110.GT4
- Type 688 / 689 / 810 engine
This igniter is to be used with a primary resistance coil between 2.5 and 3.5 ohms.
- R4 - R6 - R8 - Caravelle - Matra jet - R12.TL - R12.TS - R15.TL - A110.V85 (810) - A110.GT4
- Type 688 / 689 / 810 engine
This igniter is to be used with a primary resistance coil between 2.5 and 3.5 ohms.
€262.00
€2.50
€6.00
€0.80
€2.50
€4.50
Rear trumpet stud grower washer and brake disc screw (Front or Rear) - M10
Reference : 4313
En stock
€0.60
€1.00
€7.00
€9.00
€0.80
Sticker black "Turbo" - R5 Alpine Turbo (122B)
Reference : 0034
En stock
To be positioned outside the rear window
€15.00
Sticker "Renault ELF F1"
Reference : 0032
En stock
This sticker is printed upside down so that it can be positioned on a window inside the vehicle.
€12.00
€0.50
kit of 3 front bumper mustaches 2nd model (from 1954)
Reference : 1979
En stock
Supplied with staples (x14) and screw-on support (x2)
€135.00
"Renault ELF - 1st in Rallye Monte-Carlo 81" sticker for rear window
Reference : 0033
En stock
This sticker is printed upside down so that it can be positioned on a window inside the vehicle.
€18.00
Oil cap sticker "Renault ELF Prestigrade Sport Supra Renault" - exterior Ø48mm
Reference : 0035
En stock
€4.00
Resin, varnish or paint stripper - 750ml
Reference : C049
En stock
Only delivery in France
Product for stripping most varnishes and paints such as polyurethane, epoxy, glycero, cellulose, etc.
Product for stripping most varnishes and paints such as polyurethane, epoxy, glycero, cellulose, etc.
€23.50
"Turbine Type" aluminium rim - R5 Alpine Turbo - ref 6001001966
Reference : 5371
En stock
- Sold individually with the Alpine central cap
- Dimensions: 5.5"x13 - ET offset: 25mm
- Fixing distance: 3x115 - Ø of circle between studs: 3x130
- Color: black and varnished aluminum
- 60° wheel nut cone (wheel nut not supplied with the rim)
- For tire 155/70R13 - 164/60R13 - 185/60R13
- Dimensions: 5.5"x13 - ET offset: 25mm
- Fixing distance: 3x115 - Ø of circle between studs: 3x130
- Color: black and varnished aluminum
- 60° wheel nut cone (wheel nut not supplied with the rim)
- For tire 155/70R13 - 164/60R13 - 185/60R13
€170.00
Kit of 2 front wheel bearings - Ø30x62x16 (x2) - ref 7701460637
Reference : 5372
En stock
- Delivered with nut and spinnaker seal integrated into the bearing
- R4 / R5: from 1972 to 1985, EXCEPT Alpine and Alpine Turbo.
- R4 / R5: from 1972 to 1985, EXCEPT Alpine and Alpine Turbo.
€32.00
€0.80
Brass tube in beam Ø32mm A310.6 ref 6000056889
Reference : 7262
En stock
Sold individually
Overall length: 221.5cm
Hand delivery to the AVP store.
No shipping.
Overall length: 221.5cm
Hand delivery to the AVP store.
No shipping.
€104.00
Straight brass tube in beam Ø32mm - A310.4 - ref 6000002140
Reference : 7229
En stock
Overall length: 230cm
Hand delivery to the AVP store.
No shipping.
Hand delivery to the AVP store.
No shipping.
€133.00
Left brass tube in beam Ø32mm - A310.4 - 6000002141
Reference : 7236
En stock
Overall length: 243cm
Hand delivery to the AVP store.
No shipping.
Hand delivery to the AVP store.
No shipping.
€136.00
Kit of 2 rear wheel bearings Ø20x42x15 and Ø25x47x15 - ref 7701460642
Reference : 5373
Ce produit est actuellement indisponible à la vente
- Delivered with nut, dust cover and Ø50mm hub cap
Agrees :
- R4: all models
- R5 Alpine: 2nd assembly after 06/1985
-R5 Alpine Turbo
Agrees :
- R4: all models
- R5 Alpine: 2nd assembly after 06/1985
-R5 Alpine Turbo
€26.00
Mintex Front and Rear brake pads - competition type (For small brake assembly)
Reference : 4485
En stock
Competition type inserts performing well at cold and high temperatures
€170.00
Ventilation with aluminum fins front brake drum A 106 and 108
Reference : A1904
Ce produit est actuellement indisponible à la vente
€240.00
€7.50
Pair of platinum screws for Ducellier lighter (V6-PRV engine) - ref: 7701200561
Reference : 7735
Ce produit est actuellement indisponible à la vente
Compatible with Ducellier references 618736 and Valeo D335
€43.00
Fuel pump with horizontal outlets for 1600cc engine
Reference : 6813
En stock
3-tube pump: inlet - outlet - return
Sold without seal and without thermal wedge
Sold without seal and without thermal wedge
€42.00
pair of preformed rear quarter profile (to adjust and holes to drill)
Reference : 6943
Ce produit est actuellement indisponible à la vente
€198.00
sticker kit for engine compartment and door entrances (with color code) - R5 Alpine/R5Alpine Turbo
Reference : 0036
En stock
Each kit is composed of all the color codes
€39.00
Black body surround edging kit (complete ready to install and plan provided) - R5 Alpine (from 1976 to 1980)
Reference : 0037
En stock
€98.00
Red body surround edging kit (complete ready to install and plan provided) - R5 Alpine (from 1976 to 1980)
Reference : 0038
En stock
€98.00
silver grey body surround edging kit (complete ready to install and plan provided) - R5 Alpine (from 1976 to 1980)
Reference : 0039
En stock
€98.00
€1.50
€1.00
€1.50
Stainless steel surround of rear skirt (Sold with its sides) - A108 / Interlagos
Reference : 6913
Ce produit est actuellement indisponible à la vente
€290.00
€11.00
Washable Green air filter - R5.L and TL / R4.TL (72-77)
Reference : 4L-814
En stock
Suitable for: R4 TL (72-77)
R5 L (79-84) / TL GTL (79-85)
R5 Campus and Super Campus
R5 L (79-84) / TL GTL (79-85)
R5 Campus and Super Campus
€64.00
€0.90
€0.90
€1.00
€1.00
Assortment of Soapstone fuses 5A-25A
Reference : C058
En stock
This set contains the following fuses:
5A(x2) + 8A(x2) + 10A(x2) + 16A(x2) + 25A(x2)
5A(x2) + 8A(x2) + 10A(x2) + 16A(x2) + 25A(x2)
€4.75
€0.50
€0.50
€0.50
€0.50
€0.50
Flat lever switch in black plastic Ø12.5mm 12V - 10A (x1 ON/OFF position with x2 pins)
Reference : C064
En stock
€6.00
€4.00
Round metal lever switch Ø12mm 12V - 15A (x2 ON/OFF/ON positions with x3 pins
Reference : C066
Ce produit est actuellement indisponible à la vente
€4.50
€10.00
€1.00
€1.00
€1.50
€3.00
€3.50
Standard fuse box with side terminals - 4 fuses
Reference : 8716
En stock
Delivered without fuses
Dimensions: Lg 86mm x W 53mm x H43mm - Fixing distance: 71mm
Dimensions: Lg 86mm x W 53mm x H43mm - Fixing distance: 71mm
€4.00
Standard fuse box with side terminals - 6 fuses
Reference : 8717
En stock
Delivered without fuses
Dimensions: Lg 118mm x W 53mm x H 43mm - Fixing distance: 107mm
Dimensions: Lg 118mm x W 53mm x H 43mm - Fixing distance: 107mm
€6.00
Standard fuse box with side terminals - 8 fuses
Reference : 8718
En stock
Delivered without fuses
Dimensions: Lg 154mm x W 53mm x H 43mm - Fixing distance: 144mm
Dimensions: Lg 154mm x W 53mm x H 43mm - Fixing distance: 144mm
€8.00
Standard fuse box with side terminals - 10 fuses
Reference : 8719
En stock
Delivered without fuses
Dimensions: Lg 185mm x W 53mm x H 43mm - Fixing distance: 175mm
Dimensions: Lg 185mm x W 53mm x H 43mm - Fixing distance: 175mm
€10.00
Soapstone fuse box - 4 fuses
Reference : 1752
En stock
Delivered without fuses
Dimensions: Lg 60mm x W 47mm x H 27mm - Fixing distance: 45mm
Dimensions: Lg 60mm x W 47mm x H 27mm - Fixing distance: 45mm
€6.50
Soapstone fuse box - 6 fuses
Reference : 1753
En stock
Delivered without fuses
Dimensions: Lg 92mm x W 47mm x H 27mm - Fixing distance: 60mm
Dimensions: Lg 92mm x W 47mm x H 27mm - Fixing distance: 60mm
€7.50
Soapstone fuse box -8 fuses
Reference : 1754
En stock
Delivered without fuses
Dimensions: Lg 122mm x W 47mm x H 27mm - Fixing distance: 90mm
Dimensions: Lg 122mm x W 47mm x H 27mm - Fixing distance: 90mm
€8.50
€5.00
Two-pole circuit breaker with key - Max 500A / M8 fixing
Reference : 8712
Ce produit est actuellement indisponible à la vente
Sold with its key and protective cap
€10.00
€2.00
ON/OFF hazard warning light control button (Red triangle logo and chrome outline)-R12
Reference : 8722
En stock
7 pin switch
€11.00
Window regulator ON/OFF/ON button (chrome surround)-R16
Reference : R16-72
Ce produit est actuellement indisponible à la vente
5 pin switch
€11.00
€10.00
Air filter - Ø 143x204x79mm - R4 / Caravelle / R8 (1130 / 1132/ 1136)
Reference : 4834
Ce produit est actuellement indisponible à la vente
€14.00
Paper gasket for gearbox bottom - Gearbox 365-00/365-02/365-05 - ref 7700521271
Reference : 8110
En stock
€9.00
€5.00
€1.75
€4.00
€6.00
€45.00
€2.00
€1.00
€4.50
Spring in front or rear brake caliper yoke (large brake assembly) - ref 77010001446
Reference : 7450
En stock
€8.00
€2.50
€3.50
Clutch fork spring retaining nut and clutch cable guide - Box 330/353 - ref 6076566
Reference : 4159
En stock
€6.00
Ø10mm connecting sleeve between jar nipple (large diameter) and Lockheed pipe
Reference : 4491
En stock
€3.50
Ø6mm connection sleeve between jar nipple (small diameter) and Lockheed pipe
Reference : 4492
En stock
€3.00
Carburetor gasket kit - Weber 32 DIR 75/100 (Ø1.75 needle) - R5 Alpine Turbo (122B)
Reference : 5809
Ce produit est actuellement indisponible à la vente
€49.00
Tank gasket for carburetor - Weber 32 DIR 75/100 and 32 DARA - R5 Alpine turbo (122B)
Reference : 5813
Ce produit est actuellement indisponible à la vente
€4.00
€6.50
€0.90
€2.00
€4.50
€8.00
Chrome-plated brass washer for hubcap screw (Ø 12x23mm)
Reference : 19501
En stock
Mounting with AVP4981 screws
€2.00
Chrome-plated brass washer for hubcap screw (Ø 14x23mm)
Reference : 49501
En stock
Mounting with AVP4991 screws
€2.00
€3.00
€5.00
€5.50
€620.00
Steel ring in rear wheel shaft boot - Simca all models - ref 23176R
Reference : 9134
En stock
Fits with refs AVP9110 & AVP9111
€8.00
Lower castellated nut for pivot or steering knuckle M12x150 - 4CV (1st or 2nd model)/Dauphine - ref 706315906
Reference : 2325
En stock
€4.00
€39.00
Brake cleaner spray (500ml)
Reference : C069
En stock
Ideal for degreasing all your braking elements or other mechanical parts.
€6.00
€250.00
€9.50
Gasket kit for 1 carburetor with 2.0 needle - Weber 40 or 45 (DCO or DCOE)
Reference : 9807
Ce produit est actuellement indisponible à la vente
€21.00
€27.00
Carburetor gasket set - Solex 32 PIBT or PICBT - Dauphine Gordini / Florida
Reference : 2813
Ce produit est actuellement indisponible à la vente
€35.00
Bearing in primary shaft guide flywheel Ø 12x32x10mm - Simca 1000/ R1 / R2 / R3 / 1200s - ref 32850S
Reference : 9006
En stock
€6.00
Manual windshield washer pump (x1 Inlet + x2 Outlets)
Reference : 3913
Ce produit est actuellement indisponible à la vente
Push button pressure system
€23.00
Set of crankshaft bearing pads Ø 40mm - STD (original size) - 4L (Billancourt Type 839 and 800 engines after 1972)
Reference : 4L-029
En stock
Specific bearing (distribution side): Bush without groove on the bearing cap side.
Suitable for Billancourt Type 839 and 800 engines (from July 1972)
Suitable for Billancourt Type 839 and 800 engines (from July 1972)
€35.00
Set of crankshaft bearing pads Ø 39.75mm -Repair dimension(+0.25)- 4L (Billancourt Type 839 and 800 engines after 1972)
Reference : 4L-030
En stock
Specific bearing (distribution side): Bush without groove on the bearing cap side.
Suitable for Billancourt Type 839 and 800 engines (from July 1972)
Suitable for Billancourt Type 839 and 800 engines (from July 1972)
€35.00
Kit of 18 stainless steel serflex clamps for engine cooling circuit - A310.4
Reference : 7213
En stock
This kit is composed of:
AVP5214 Ø 25 to 40mm x17
AVP5209 Ø 40 to 60mm x1
AVP5214 Ø 25 to 40mm x17
AVP5209 Ø 40 to 60mm x1
€16.00
Kit of 18 stainless steel serflex clamps for heating circuit - A310.4 (1st version)
Reference : 7217
En stock
This kit is composed of:
AVP5223 Ø 12 to 20mm x4
AVP5215 Ø 16 to 27mm x14
AVP5223 Ø 12 to 20mm x4
AVP5215 Ø 16 to 27mm x14
€12.00
Kit of 12 stainless steel serflex clamps for heating circuit - A310.4 (2nd version)
Reference : 7218
En stock
This kit is composed of:
AVP5223 Ø 12 to 20mm x4
AVP5215 Ø 16 to 27mm x8
AVP5223 Ø 12 to 20mm x4
AVP5215 Ø 16 to 27mm x8
€8.00
Kit of 18 stainless steel serflex clamps for engine cooling circuit - A310.6
Reference : 7219
Ce produit est actuellement indisponible à la vente
This kit is composed of:
AVP 5214 Ø 25 to 40mm x16
AVP 5218 Ø 32 to 50 mm x2
AVP 5214 Ø 25 to 40mm x16
AVP 5218 Ø 32 to 50 mm x2
€16.00
Kit of 28 stainless steel serflex clamps for engine cooling circuit - A310.6
Reference : 7222
Ce produit est actuellement indisponible à la vente
This kit is composed of:
AVP 5214 Ø 25 to 40mm x4
AVP 5217 Ø 8 to 16mm x12
AVP 5223 Ø 12 to 20mm x7
AVP 5215 Ø 16 to 27mm x3
AVP 5209 Ø 40 to 60mm x2
AVP 5214 Ø 25 to 40mm x4
AVP 5217 Ø 8 to 16mm x12
AVP 5223 Ø 12 to 20mm x7
AVP 5215 Ø 16 to 27mm x3
AVP 5209 Ø 40 to 60mm x2
€21.00
Kit of 12 stainless steel serflex clamps for engine cooling circuit - A310.6
Reference : 7228
En stock
This kit is composed of:
AVP 5223 Ø 12 to 20mm x4
AVP 5215 Ø 16 to 27mm x8
AVP 5223 Ø 12 to 20mm x4
AVP 5215 Ø 16 to 27mm x8
€8.00
Air filter - ref 7701030196 / 7701034934
Reference : 258001
En stock
Suitable for:
-Alpine GTA V6 Turbo (Type D501 Z7U engine)
-R19 (All models)
-R21 2.0L Turbo
-R25 V6 and V6 Turbo
-Alpine GTA V6 Turbo (Type D501 Z7U engine)
-R19 (All models)
-R21 2.0L Turbo
-R25 V6 and V6 Turbo
€12.00
External strip clip Ø 5mm - R4 (R112C / R1123 / R1128) - ref 0854840900 / 0855932600 / 7701000966
Reference : 4L-915
En stock
Need x34 coins for a car
€0.25
Metal staples for upholstery (Pig nose staple) - Sold x200 pieces - ref 7703076063
Reference : 5913
Ce produit est actuellement indisponible à la vente
€10.00
€1.20
Metal cage nut M8x125 - ref 0852492000 / 7703044183
Reference : C075
En stock
R8 and R16: Insert in the rear longitudinal members for fixing the rear bumper supports
€2.50
€2.25
Valve lapping kit (Lapping 2 sizes + lapping paste)
Reference : T013
En stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
x1 pot of coarse grain 120 lapping paste
€30.00
Set of front brake pads (Lucas/Girling assembly) - R5 / R4 (Sedan / F4 and F6 van / Rodeo) - ref 7701201159
Reference : 4L-408
En stock
€22.00
Kit of x5 copper brake pipes (premium quality) - Fitting for original braking system - A110 all models (except 1600 SC/SI/SX)
Reference : 6408
Ce produit est actuellement indisponible à la vente
The entire kit is made up of 3/8" -24UNF fittings
This kit is made up of the following copper pipes:
- from the brake master cylinder to the Front Right wheel
- from the brake master cylinder to the Front Left wheel
- from the brake master cylinder to the distributor or rear three-way connection
- from the three-way connection or rear distributor to the right rear wheel
- from the three-way connection or rear distributor to the left rear wheel
This kit is made up of the following copper pipes:
- from the brake master cylinder to the Front Right wheel
- from the brake master cylinder to the Front Left wheel
- from the brake master cylinder to the distributor or rear three-way connection
- from the three-way connection or rear distributor to the right rear wheel
- from the three-way connection or rear distributor to the left rear wheel
€124.00
Kit x8 copper brake pipes - Original assembly with pressure drop indicator (ICP) - A110.SC/SI/SX
Reference : 6411
En stock
This kit is made up of the following copper pipes:
- from the brake master cylinder to the pressure drop indicator (1/2"-20UNF connection)
- from the brake master cylinder to the pressure drop indicator (3/8"-24UNF connection)
- from the pressure drop indicator to the Right Front wheel
- the pressure drop indicator at the Front Left wheel
- from the pressure drop indicator to the rear brake distributor
- from the brake distributor to the rear three-way connection
- from the three-way connection or rear distributor to the right rear wheel
- from the three-way connection or rear distributor to the left rear wheel
- from the brake master cylinder to the pressure drop indicator (1/2"-20UNF connection)
- from the brake master cylinder to the pressure drop indicator (3/8"-24UNF connection)
- from the pressure drop indicator to the Right Front wheel
- the pressure drop indicator at the Front Left wheel
- from the pressure drop indicator to the rear brake distributor
- from the brake distributor to the rear three-way connection
- from the three-way connection or rear distributor to the right rear wheel
- from the three-way connection or rear distributor to the left rear wheel
€134.00
Kit of x5 copper brake pipes - Fitting for original braking system without mastervac - R8 (R1130 and R1132) / R10
Reference : 4413
En stock
The entire kit is made up of 3/8"-24UNF fittings
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the distributor or rear three-way connection
- From the three-way connection or rear distributor to the right rear wheel
- From the three-way connection or rear distributor to the left rear wheel
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the distributor or rear three-way connection
- From the three-way connection or rear distributor to the right rear wheel
- From the three-way connection or rear distributor to the left rear wheel
€112.00
Kit of x7 copper brake pipes (Superior quality) - Fitting for original braking system - A310.6
Reference : 7404
Ce produit est actuellement indisponible à la vente
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the front brake distributor (3/8"-24UNF connection)
- From the brake master cylinder to the front brake distributor (M10x100 connection)
- From the Front distributor to the Rear three-way connection,
- From the rear three-way connection to the right rear wheel
- From the rear three-way connection to the left rear wheel
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the front brake distributor (3/8"-24UNF connection)
- From the brake master cylinder to the front brake distributor (M10x100 connection)
- From the Front distributor to the Rear three-way connection,
- From the rear three-way connection to the right rear wheel
- From the rear three-way connection to the left rear wheel
€158.00
Kit of x7 copper brake pipes - Fitment for original brake system - R5 Alpine (1223) / R5 Alpine Turbo (122B)
Reference : 5409
Ce produit est actuellement indisponible à la vente
The entire kit is composed of 3/8"-24UNF and M10x100 fittings
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the rear distributor
- From the rear splitter to the right rear arm
- From the rear splitter to the rear left arm
-From the Right Rear arm to the Right Rear wheel
-From the Rear Left arm to the Rear Left wheel
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the rear distributor
- From the rear splitter to the right rear arm
- From the rear splitter to the rear left arm
-From the Right Rear arm to the Right Rear wheel
-From the Rear Left arm to the Rear Left wheel
€158.00
Kit of x8 copper brake pipes - Fitment for original brake system - Super 5 GT Turbo
Reference : 554001
En stock
The entire kit is composed of M10x100 and M12x100 fittings
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the rear distributor (x2)
- From the rear splitter to the right rear arm
- From the rear splitter to the rear left arm
- From the Right Rear arm to the Right Rear wheel
- From the Rear Left arm to the Rear Left wheel
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
- From the brake master cylinder to the rear distributor (x2)
- From the rear splitter to the right rear arm
- From the rear splitter to the rear left arm
- From the Right Rear arm to the Right Rear wheel
- From the Rear Left arm to the Rear Left wheel
€198.00
Engine oil (Mineral and Monograde) "ELF HTX Prestige" - SAE40 - 5 Liters
Reference : C078
En stock
The formula of HTX PRESTIGE SAE 40 engine oils has been designed
especially for vehicle engines manufactured between 1900 and
1950, for models without oil filters or with oil separator
cyclone.
This engine oil is compatible with most seals on
classic cars.
especially for vehicle engines manufactured between 1900 and
1950, for models without oil filters or with oil separator
cyclone.
This engine oil is compatible with most seals on
classic cars.
€56.00
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 2 Liters
Reference : C079
Ce produit est actuellement indisponible à la vente
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€24.00
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 5 Liters
Reference : C080
En stock
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€55.00
Engine oil (Mineral and Multigrade) "ELF HTX Prestige" - 20w50 - 5 Liters
Reference : C081
En stock
HTX PRESTIGE 20W-50 oil is a mineral engine oil suitable for
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
€62.00
Engine oil (Mineral and Multigrade) "ELF HTX Generation" - 15w40 - 5 Liters
Reference : C082
En stock
HTX GENERATION 15W-40 oil is an engine oil
mineral suitable for classic category cars
“young timer”, especially those that were manufactured between
the 1980s and 2000s.
The excellent viscosity balance guarantees starts at
low wear, even after long periods of immobilization,
and also protects against wear and tear in hot weather.
mineral suitable for classic category cars
“young timer”, especially those that were manufactured between
the 1980s and 2000s.
The excellent viscosity balance guarantees starts at
low wear, even after long periods of immobilization,
and also protects against wear and tear in hot weather.
€56.00
Engine oil (Synthetic and Multigrade) "ELF HTX Chrono" - 10w60 - 5 Liters
Reference : C083
En stock
HTX CHRONO 10W-60 oil is a synthetic engine oil
suitable for classic racing cars, whether
old or newer.
Lubricant for powerful modified and reconditioned, supercharged engines
by a turbocharger or compressor. The oil
10W-60 allows you to take advantage of the full power of the motor,
without any risk of wear or mechanical deterioration.
suitable for classic racing cars, whether
old or newer.
Lubricant for powerful modified and reconditioned, supercharged engines
by a turbocharger or compressor. The oil
10W-60 allows you to take advantage of the full power of the motor,
without any risk of wear or mechanical deterioration.
€72.00
Kit of x8 side strips (Exterior) in polished stainless steel - R4
Reference : 4L-924
En stock
The kit consists of:
x2 Front fender strips
x2 Front door strips
x2 Rear door strips
x2 Rear fender strips
x2 Front fender strips
x2 Front door strips
x2 Rear door strips
x2 Rear fender strips
€320.00
Kit of 8 side strips (Exterior) "period" in polished aluminum (Width 15x8mm) - Dauphine / Ondine (2nd Model)
Reference : 2954
En stock
Some wands may have small marks due to period storage, the wands are partly covered with period protective film (yellow)
The kit consists of:
x2 Front fender strips
x2 Front door strips
x2 Rear door strips
x2 Rear fender strips
The kit consists of:
x2 Front fender strips
x2 Front door strips
x2 Rear door strips
x2 Rear fender strips
€350.00
Kit of x5 side strips (Exterior) in polished aluminum with fixing clips (x24pcs) - 4CV (All models)
Reference : 1958
En stock
The kit consists of:
x2 Front door strips
x2 Rear door strips
x1 Front hood strip (Grand Luxury and Sport versions only)
x2 Front door strips
x2 Rear door strips
x1 Front hood strip (Grand Luxury and Sport versions only)
€88.00