Front right brake caliper Ø 48mm for mounting "Big brakes" (Bendix mounting)

Suitable for:

• R8 / A110: Front Brake (Big Brake Assembly)
• R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
• R12 (All models) / R15TL: Front Brake
• R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake
• A310.4 (n°910 at the end of the series): Front Brake
• A310 V6 (Before 1980): Front Brake

• Key length: 51mm
• Key width: 23.5mm

The central unit is connected as follows:

• The 12V power supply (+ battery) wire on the "X" or "+" terminal
• The Switch or stalk control wire on the "L" or "Z" terminal
• The repeater indicator light wire (LED) on the "P" terminal

Matradjet back

• 4 spark plug wires + 1 coil wire
• Terminals on coil straight
• Length of coil cable: 61cm
• Length of 2 spark plug cables: 26.5cm
• Length of 2 spark plug cables: 36.5cm
• We would like to point out that our spark plug wires are made with 7mm diameter silicone wire, black or red, with a standard copper core (wire material), which means they are not protected against interference.
• If the vehicle is equipped with sensitive electronic accessories, such as radios, tripmasters, monitors, or certain electronic ignition kits, interference or Disruptions may occur.

• Installation with brake booster

Suitable for:

• PR12 TS / TR (R1177): From 10/1972
• R12 Estate L/TL / LN / TN (R1330 - 2nd assembly): From no. 41502 to end of series
• R12 Estate S/ TS / Gordini (R1137)
• R16 TS (R1151)
• R16 L / TL (R1152)