6V, 12V and 24V current tester
Segment Characteristics:
-
- Segment Diameter: Ø 70mm
- Thickness of Upper Segments (Fire-resistant): 2mm
- Thickness of Intermediate Segments (Waterproof): 2mm
- Low ring thickness (Scraper): 3.5mm
It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.or the values provided in the instruction manual.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
Neoprene-type contact adhesive in spray form, extra-strong. It adheres to many materials such as leather, fabrics, plastic, woodwork, etc. Allows simple, rapid, precise, and durable bonding of materials. Applies as a transparent film.
Packaged in an aerosol can with a multidirectional nozzle, it allows for fine, medium, and wide sprays, making it possible to spray all surfaces.
Application:
- Glue from a distance of 20-25 cm on previously degreased surfaces.
- Wait approximately 2 minutes before bringing the two surfaces into contact.
- Press the parts briefly and firmly after joining.
Technical specifications:
- Brand: Restom
- Model: NéoSpray Glue
- Capacity: 400ml
- Coverage: approximately 5 m²
- Resists up to 80°C continuously and 100°C peaks
Shipping possible only in mainland France
.jpg)
Delivery in France only
- Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
- DOT 5 approved (not to be confused with DOT 5.1)
Directions for use:
- Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.
