The installation of the rear tie rods reduces the movement of the rear axle, providing the vehicle with improved road holding on the rear axle.
The tie rods can be installed on a 4CV with the battery in the front...
In stock
Rear axle Alpine A106
Our spare parts for the rear axle of the Renault Alpine A106
Discover here a wide choice of parts to maintain or restore the rear axle of your Renault Alpine A106
Whether you are looking for shock absorbers, suspension springs, trumpet bellows, engine mount, crossmember reinforcement, rear tie rods, stud, wheel nuts...at AVP, Arnaud Ventoux Parts, you will find everything you need to breathe new life into your old with quality components.
Trumpet Dice Dimensions:
Inner Diameter: Ø 18.4mm
Outer Diameter: Ø 29.96mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.80mm
Shoulder Height: 4.20mm
Dice with dust seal.
Sold individually
In stock
Trumpet Dice Dimensions:
Inner Diameter: Ø 19.4mm
Outer Diameter: Ø 29.96mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.80mm
Shoulder Height: 4.20mm
Dice with dust seal.
Sold individually
In stock
Trumpet Thimble Dimensions:
Inner Diameter: Ø 20.4mm
Outer Diameter: Ø 30.00mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.90mm
Shoulder Height: 3.60mm
Sold in pairs
In stock
In stock
Metal band hose clamp with pin lock
Metal band width: 9 mm
Clamp length: 500 mm
Maximum diameter: Ø 150 mm
In stock
In stock
Out of stock
Inner diameter of the silentbloc axle: Ø 9mm
Rod thread: M10
Rod overall length: 285mm
In stock
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
In stock
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Douille en bout de la manivelle pour écrou de roue : 17mm
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
In stock
In stock