In stock
Cooling & hoses Caravelle
Our spare parts for Cooling and Hoses for your Renault Caravelle
Discover here a wide choice of spare parts available to ensure the proper functioning and longevity of the cooling circuit of your Renault Caravelle.
Whether you are looking for cooling or heating hoses, water pump, water pump seal and plate, thermostat, thermostat, thermo contact, thermistor, drain cock, coolant...at AVP, Arnaud Ventoux Parts, you will find everything you need to restore your Renault Caravelle collection with quality components.
Suitable for:
Dauphine (All models)
Floride / Caravelle : Need x2 hoses
Alpine A108
In stock
Renault OE Ref: 85295330 / 0857734900
Suitable for:
R8 (R1130 / R1132): Solex 32 DISTA / DITA
Caravelle: Solex 32 DISTA / DITA
In stock
Hose inner diameter: Ø 9mm
In stock
This hose is also suitable for carburetors with a cold-start choke controlled by a thermostatic spring heated by hot water (Hose from the cold-start heater to the carburetor base)
OE Renault Ref: 8575004 / 0857735000...
In stock
R8 (R1132) and Caravelle: 688 Engine
Renault OE Ref: 0857350100 / 7700510210
In stock
Sold with water pump gasket
Distance between two pulley mounting bolts (Center-to-center distance):50mm
Pulley mounting using x4 M8 bolts (Not supplied)
Renault / Alpine OE Ref: 7701506944 / 7701457453
Suitable...
In stock
Sold with water pump gasket
Distance between two pulley mounting bolts (Center-to-center):50mm
Pulley mounting using x4 M8 bolts (Not supplied)
The high-flow water pump increases performance Cooling without any...
In stock
Suitable for:
Simca 1000 / 1200S / R1 / R2 / R3 / CG - Ref 22089M
Renault R8 / R8G / Floride / Caravelle
Alpine GT4 / A110 (1100Cm³ / 1300cm³)
Matradjet
These bearings are only suitable for old generation water...
In stock
Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact
Delivered without seal
In stock
In stock
Pulley Specifications:
Pulley Outer Diameter: Ø 140mm
For use with a 10mm wide belt
Pulley Mounting Bolt Spacing: 4x50 mm
Mounting Bolt Diameter: Ø 8mm
Water Pump Centering Hole Diameter: Ø 23.70mm
Pulley Mounting...
In stock
In stock
To turn on a temperature warning light
Trigger temperature 105°C
In stock
To turn on a temperature warning light
Trigger temperature 115°C
Out of stock
To turn on a temperature warning light
Trigger temperature 97°C
In stock
Fan trigger temperature 82°C
Fan stop temperature 72°C
In stock
Fan trigger temperature 88°C
Fan stop temperature 79°C
In stock
Fan trigger temperature 92°C
Fan stop temperature 82°C
In stock
In stock
In stock
In stock
Out of stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
In stock
Delivery in France only
Spray paint for easy application to radiator fins
Resists all commercial coolants, oil, and fuels (after one week of drying)
In stock
Use for removing rust:
Dilute 50% with water
Apply by brush or by soaking; do not allow the product to dry
Rinse with water
Also suitable for cleaning radiators and cooling systems.
Delivery within France only
In stock
Metric tap (ISO 6H tolerance): M6x100 (Right-hand thread)
Tap length (Overall): 66 mm
Mounting recess: 5 mm square
Pointed point tap, suitable for: Through holes
Machine tap: Only one tap is needed to create a...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock