Suitable for:
R5
R5 Alpine Atmo (1223) and Alpine Turbo (122B)
R12 (All models)
R15
R18
For DBA (Bendix) or Girling mounting
In stock
braking Renault 5
Our braking spare parts for the Renault R5.
Discover here a wide choice of parts to restore and ensure the proper functioning of the braking system of your Renault R5.
Whether you are looking for wheel cylinders, hoses, master cylinders, brake discs, lockheed, reservoir, connector, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Pièces, you you will find everything you need to bring your old one back to life with quality components.
Suitable for:
R5
R5 Alpine Atmo (1223) and Alpine Turbo (122B)
R12 (All models)
R15
R18
For DBA (Bendix) or Girling mounting
In stock
In stock
Suitable for the following vehicles:
R5 / SUPER 5 / R9 / R11 / R18 / R19 / R21: Front Brakes
Clio 1.8-16V: Front Brakes
Alpine GTA (V6 GT and V6 Turbo): Rear Brakes
Brake Pad Dimensions:
Width: 105mm
Height:...
In stock
Suitable for the following vehicles:
R5 / SUPER 5 / R9 / R11 / R18 / R19 / R21 / R25: Front Brakes
Clio 1.8L 16V / Clio Williams: Front Brakes
Alpine GTA (V6 GT and V6 Turbo): Front Brakes
Brake Pad Dimensions:...
In stock
Suitable for the following vehicles:
R5 / R11 / R18 / R19 / R21: Front Brakes
Super 5 GT Turbo: Front Brakes
Alpine GTA: Front Brakes
Brake Pad Dimensions:
Width: 100mm
Height: 65mm
Thickness: 18mm
In stock
Suitable for the following vehicles:
R5 / R11 / R18 / R19 / R21 / R30: Front Brakes
Super 5 GT Turbo: Front Brakes
Brake Pad Dimensions:
Width: 105mm
Height: 55mm
Thickness: 18mm
In stock
Suitable for:
R5 / R18 / R21 / R25 / R30 / : Rear Brake
R8: Rear Big Brake Installation
R5 Alpine Turbo (122B): Rear Brake
R12G / R17G: Rear Brake
A110: Rear Big Brake Installation
A310.4: Rear Brake
A310 V6...
In stock
3 x Fittings: Ø 3/8"-24UNF (Ø 9.52mm)
2 x Mounting Holes
Suitable for:
R4 / 4L: From 1968 to 1976
R5 TL / R5 TS
R16 TS
Out of stock
Connectors : M12X100 (x2) and in M10x100 (x2)
In stock
Kit Contents:
Caliper/stub mounting screws: x2
Guide stub: x2
Protective boot: x2
Assembly grease x1
For braking systems: TRW or Lucas type
This kit is suitable for mounting a right or left caliper on a caliper yoke...
In stock
In stock
Out of stock
In stock
For securing brake or fuel pipes, hoses, or lines
Out of stock
In stock
In stock
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
Ideal for degreasing all your braking elements or other mechanical parts.
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock