Spare Parts Steering Front Axle R5 | Arnaud Ventoux Parts

Pair of Right and Left Steering Tie Rods - R4 (Third Models - From 1969 to 1978) / R5 (First Models)

Suitable for: R4 (R1120): From chassis no. 954001 to the end R4 (R1123): From chassis n°627132 to n°2012576 R4 (R1126): From the beginning to chassis no. 655996 R4 (R1128): From the beginning to chassis no. 60549 R4...

Reference: 4L-609

€82.00 (tax incl.)

Add to cart

In stock

Front upper wishbone silentblock - Ø 12x26x23x36.2mm - 1

Upper wishbone silentblock - Ø 12x26x23x36mm - Ref 7700573750 / 7701348037

Hardness of the silentblock rubber: 75 Shores

Reference: 5308

€6.00 (tax incl.)

Add to cart

In stock

Front lower wishbone bush - Ø 14x34x40x45mm - 1

Lower front wishbone bush - Ø 14x34x40x45mm

Hardness of silentblock rubber:75 Shores

Reference: 5307

€6.00 (tax incl.)

Add to cart

In stock

Lower wishbone bush - Ø 14x27x40x46mm - 1

Rear Silentbloc of the Lower Triangle or Lower Arm - Ø 14x27x40x45mm - R4 (All models) / R5 - Ref 7701348454

Rubber bush hardness: 75 Shores OE Renault Ref: 0854588600 / 0855842600 / 7701348454 Suitable for: R4 / 4L (All models): Lower control arm bush R5 (All models): Rear lower wishbone bush

Reference: 5306

€5.50 (tax incl.)

Add to cart

In stock

Underbody shell seal for stabilizer bar end protection (Right or Left) - 1

NEW

Underbody shell seal for stabilizer bar end protection (Right or Left)

Sold individually OE Renault Ref: 0428245200 / 7702144008

Reference: 4L-306

€17.00 (tax incl.)

Add to cart

In stock

Kit of 2 front wheel bearings - Ø30x62x16 (x2) - ref 7701460637 - 1

Kit of 2 front wheel bearings - Ø 30x62x16mm (x2) - Ref 7701460637

The kit contains: 2 bearings Ø 30x62x16mm 1 transmission nut M16x150 Suitable for: R4: All models R5: (From 1972 to 1985 - EXCEPT Alpine and Alpine Turbo) R6 OE Renault Ref: 7701460637 / 7701461046 / 7703090270 /...

Reference: 5372

€32.00 (tax incl.)

Add to cart

In stock

Pair of Front Shock Absorbers (Rod / Eye) Original Type - R4 / 4L - (From 07/1968) - 1

NEW

Pair of front shock absorbers (rod/eye) Original type oil filled - R4 / 4L (From 07/1968) / R5 (From 1972 to 1985)

Suitable for the following vehicles: R4 / 4L: Type R1120: from chassis number 954001: from 10/1968 R4 / 4L: Type R1123: from chassis number 627132: from 07/1968 R4 / 4L: Type R1126: from 1971 R4 / 4L Safari: from...

Reference: 4L-321

€85.00 (tax incl.)

Add to cart

In stock

Pair of Front Shock Absorbers / Maxigaz - R4 / 4L - RODEO - R5 - (From 07/1968) - 1

NEW

Pair of front shock absorbers (rod/eye) - Maxigaz type - R4 / 4L (From 07/1968) / R5 (From 1972 to 1985)

Suitable for the following vehicles: R4 / 4L: Type R1120: from chassis number 954001: from 10/1968 R4 / 4L: Type R1123: from chassis number 627132: from 07/1968 R4 / 4L: Type R1126: from 1971 R4 / 4L Safari: from...

Reference: 4L-322

€95.00 (tax incl.)

Add to cart

In stock

Chrome wheel nut for original steel rim M10x125 - R4 / 4L - Ref 7700625475

Reference: 4L-366

€7.00 (tax incl.)

Add to cart

In stock

Adjustment shim for rack height - Height 8.90mm - Ref 7700555563

Sold individually Shim height indicated in the photo The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements. AVP Accuracy: The two shims can be different...

Reference: 5380-1

€5.00 (tax incl.)

Add to cart

In stock

Adjustment shim for rack height - Height 9.90mm - Ref 7700555564

Sold individually Shim height indicated in the photo The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements. AVP Accuracy: The two shims can be different...

Reference: 5380-2

€5.00 (tax incl.)

Add to cart

In stock

Adjustment shim for rack height - Height 11.90mm - Ref 7700555566

Sold individually Shim height indicated in the photo The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements. AVP Accuracy: The two shims can be different...

Reference: 5380-4

€5.00 (tax incl.)

Add to cart

In stock

Adjustment shim for rack height - Height 10.90mm - Ref 7700555565

Sold individually Shim height indicated in the photo The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements. AVP Accuracy: The two shims can be different...

Reference: 5380-3

€5.00 (tax incl.)

Add to cart

In stock

Adjustment shim for rack height - Height 12.90mm - Ref 7700555567

Sold individually Shim height indicated in the photo The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements. AVP Accuracy: The two shims can be different...

Reference: 5380-5

€5.00 (tax incl.)

Add to cart

In stock

Adjustment shim for rack height - Height 13.90mm - Ref 7700555568

Sold individually Shim height indicated in the photo The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements. AVP Accuracy: The two shims can be different...

Reference: 5380-6

€5.00 (tax incl.)

Add to cart

In stock

Adjustment shim for rack height - Height 14.90mm - Ref 7700555569

Sold individually Shim height indicated in the photo The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements. AVP Accuracy: The two shims can be different...

Reference: 5380-7

€5.00 (tax incl.)

Add to cart

In stock

Straight grease nipple - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 15.20 mm Grease nipple with a 7 key recess

Reference: C107

€1.00 (tax incl.)

Add to cart

In stock

Straight Grease Nipple (Short) - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 13.60 mm Grease nipple with a 7 mm key

Reference: C108

€1.00 (tax incl.)

Add to cart

In stock

45° grease nipple - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 25mm Grease nipple with an 11mm key

Reference: C109

€1.50 (tax incl.)

Add to cart

In stock

90° Grease Nipple - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 18mm Grease nipple with a 9 key

Reference: C110

€1.50 (tax incl.)

Add to cart

In stock

Straight grease nipple - M8x125

Grease nipple with steel ball Grease nipple (overall) height: 15.5 mm Grease nipple with a 9 key

Reference: C111

€1.50 (tax incl.)

Add to cart

In stock

45° Grease Nipple - M8x125

Grease nipple with steel ball Grease nipple (overall) height: 24mm Grease nipple with a 9 key

Reference: C112

€2.00 (tax incl.)

Add to cart

In stock

90° Grease Nipple - M8x125

Grease nipple with steel ball Grease nipple (overall) height: 18mm Grease nipple with a 9 key

Reference: C113

€2.00 (tax incl.)

Add to cart

In stock

Transmission or Cardan Grease (MoS2 Type)

Original CV Joint Grease Capacity 90ml (80 grams)

Reference: C114

€4.00 (tax incl.)

Add to cart

In stock

Multipurpose grease (rolling, bearing, etc.) - 1

Multipurpose grease (bearing, bearing, etc.)

Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.

Reference: C027

€9.00 (tax incl.)

Add to cart

In stock

Thread restoration tool (Threading comb) - ISO standard (Metric pitch) - 1

NEW

Thread restoration tool (Threading comb) - ISO standard (Metric pitch)

ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300 Thread Restoration Tool for Internal and External Threads (Thread Comb) Suitable for restoring right-hand and left-hand threads, as well as...

Reference: T021

€80.00 (tax incl.)

Add to cart

In stock

Tap holder or ratchet tap wrench - Tap size M3 to M10 - 1

NEW

Tap holder or ratchet tap wrench - Tap size M3 to M10

Suitable for taps: M3 to M10 Short tap holder - Length 85 mm Reversible ratchet: Left-hand, right-hand, and fixed ratchet Two-jaw steel grip

Reference: T022

€26.00 (tax incl.)

Add to cart

In stock

Tap holder or ratchet tap wrench - Tap size M4 to M12 - 1

NEW

Tap holder or ratchet tap wrench - Tap size M4 to M12

Suitable for taps: M5 to M12 Short tap holder - Length 100mm Reversible ratchet: Left-hand, right-hand, and fixed ratchet Two-jaw steel grip

Reference: T023

€38.00 (tax incl.)

Add to cart

In stock

Steel dynamometer holder - Cage Ø 38.1mm - 1

NEW

Steel dynamometer holder - Cage Ø 38.1mm

Suitable for die outer diameter: Ø 38.1mm Die height: 12.7mm Two-arm die holder made of high-quality steel

Reference: T028

€38.00 (tax incl.)

Add to cart

In stock

Round cage die Ø 38.1mm - M10x125 (Right-hand thread) - 1

NEW

Round cage die Ø 38.1mm - M10x125 (Right-hand thread)

ISO standard metric die: M10x125 (Fine thread - Right-hand thread) Die outer diameter: Ø 38.1 mm Die height: 13.1 mm Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...

Reference: T029

€66.00 (tax incl.)

Add to cart

In stock

Round cage die Ø 38.1mm - M12x125 (Right-hand thread) - 1

NEW

Round cage die Ø 38.1mm - M12x125 (Right-hand thread)

ISO standard metric die: M12x125 (Fine thread - Right-hand thread) Die outer diameter: Ø 38.1 mm Die height: 12.8 mm Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...

Reference: T030

€66.00 (tax incl.)

Add to cart

In stock

NEW

Copper grease (10ml syringe)

Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts. Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...

Reference: C130

€9.00 (tax incl.)

Add to cart

In stock

Steering and front axle Renault 5

Our spare parts for the steering and front axle of your Renault R5.

Receive AVP news and promotions!

By entering your email address, you consent to the sending by email of our newsletter. For more information on the processing of your personal data, you can consult our Privacy Policy.