Categories
There are 2996 products.
€12.00
€0.40
Aluminum crankshaft pulley - Ø134 mm
Reference : 2011
Ce produit est actuellement indisponible à la vente
€44.00
€8.00
€229.00
Ice clutch mechanism for graphite bearing (9 springs) Ø 160mm - Dauphine (R1093)
Reference : 2119
Ce produit est actuellement indisponible à la vente
€128.00
€180.00
€14.50
€6.50
€13.00
€62.00
€62.00
€13.50
€15.00
€15.00
€16.00
€13.00
€12.00
€9.00
€365.00
Pair of front "non-aerostable suspension" shock absorbers - Dauphine (R1090) from 1956 to the end ... (Dauphine Gordini included
Reference : 2312
En stock
For the Alpine A108: Consult us before placing the order because several assemblies are possible.
€152.00
€52.00
€50.00
€10.00
€10.00
Accelerator cable
Reference : 2501
En stock
For Dauphine- Floride and Alpine A108.
- Overall length: 283.5 cm
- Sheath length: 230.1 cm
- Cable length: 272.5 cm
- Overall length: 283.5 cm
- Sheath length: 230.1 cm
- Cable length: 272.5 cm
€32.00
Clutch cable
Reference : 2502
En stock
For Dauphine-florida and Alpine A108.
- Overall length: 232 cm
- Sheath length: 192 cm
- Cable length: 221 cm
- Overall length: 232 cm
- Sheath length: 192 cm
- Cable length: 221 cm
€28.00
Hand brake cable (drum brake)
Reference : 2503
En stock
For Dauphine R1090/R1091-Florida and Alpine A108.
- Overall length: 195 cm
- Length of sheaths: 67 cm x 2
- Overall length: 195 cm
- Length of sheaths: 67 cm x 2
€32.00
SEV igniter head vertical outlet - internal Ø 54mm
Reference : 2701
Ce produit est actuellement indisponible à la vente
€15.00
SEV distributor rotor
Reference : 2702
Ce produit est actuellement indisponible à la vente
Rotor for ignition head SEV AVP2701
€11.00
European dipped headlight lens - Dauphine / 4 L / Estafette (each)
Reference : 2704
Ce produit est actuellement indisponible à la vente
€46.00
€6.00
€29.00
€5.00
€1.25
€48.00
€8.50
€2.00
€9.50
€245.00
€245.00
€27.00
€7.00
€6.00
€20.00
€28.00
€1.50
€17.00
€10.00
Pair of long chrome hinges
Reference : 2908
En stock
Front cover: A108 / A110 Back cover: Dauphine Ondine
€85.00
Set of 4 rubber seals under front bonnet hinge
Reference : 2909
Ce produit est actuellement indisponible à la vente
€14.00
€20.00
€66.00
€36.00
€16.50
€89.00
€68.00
€7.50
€29.00
€1.80
€1.80
Stainless steel wiper blade - length 28cm
Reference : 2952
Ce produit est actuellement indisponible à la vente
€11.00
€2.80
Set of 4 aluminum rear wing moldings with clips
Reference : 2956
Ce produit est actuellement indisponible à la vente
€54.00
€1.20
€58.00
€1.50
€32.00
€34.00
€42.00
€1.50
€10.00
€32.00
"Dauphine Gordini" monogram - chrome-plated arrowed italic letter
Reference : 2973
Ce produit est actuellement indisponible à la vente
€33.00
€33.00
€33.00
€35.00
€55.00
€62.00
€62.00
€64.00
€64.00
€26.00
€24.00
€24.00
€22.00
€18.00
€70.00
€75.00
€92.00
€11.00
€24.00
€16.00
€16.00
€9.00
€59.00
€38.00
€52.00
€77.00
€4.00
Engine gasket set (without cylinder head gasket) - 1255cc / 1296cc engine
Reference : 4012
Ce produit est actuellement indisponible à la vente
€116.00
€9.50
Set of 4 forged pistons Ø 70mm with segments and pins (Ø20x50mm) - R8G 1100G (1108cc engine)
Reference : 4025
En stock
€840.00
Complete set of engine gaskets without cylinder head gasket - 1100G engine
Reference : 4034
Ce produit est actuellement indisponible à la vente
€110.00
€28.00
€8.50
€32.00
€1.00
€2.00
€36.00
€76.00
Aluminum alternator pulley - 1300cc - ref 0870333100
Reference : 4044
Ce produit est actuellement indisponible à la vente
€32.00
Aluminum crankshaft pulley - Ø 148mm
Reference : 4045
Ce produit est actuellement indisponible à la vente
€83.00
Set of Ø74.5mm liners and pistons with full axis segments
Reference : 4046
En stock
Engine 812.00 (1255cc)
€480.00
€99.00
Set of connecting rod bearings (Small levels) Ø 43.98mm - STD (Original dimension)
Reference : 4048
En stock
Thickness: 1.81mm
Width: 20.75mm
Width: 20.75mm
€44.00
Set of connecting rod bearings (Small levels) Ø 43.73mm - Repair dimension (+0.25)
Reference : 4049
En stock
€44.00
Set of connecting rod bearings (Small levels) Ø 43.48mm - Repair dimension (+0.50)
Reference : 4050
En stock
€44.00
Set of crankshaft main bearings (small bearings) Ø 46mm - STD (Original dimension)
Reference : 4051
En stock
Thickness: 1.92mm
€44.00
Set of crankshaft main bearings (small bearings) Ø 45.75mm - Repair dimension (+0.25)
Reference : 4052
En stock
€44.00
Set of crankshaft main bearings (small bearings) Ø 45.50mm - Repair dimension (+0.50)
Reference : 4053
En stock
€44.00
€16.00
Intake valve - Ø35x7mm (original Ø engine 804 and 812)
Reference : 4055
En stock
Same valve for switching to large exhaust valve Ø35x7
Valve with low keyway
Valve with low keyway
€23.00
Exhaust valve - Ø32.7x7 (original Ø engine 804 and 812)
Reference : 4056
En stock
Valve with low keyway
€23.00
Big inlet valve Ø38x7mm
Reference : 4057
Ce produit est actuellement indisponible à la vente
Valve with low keyway
€23.00
€3.00
€13.00
Set of 4 engine camshaft rings 812 - R8 G / A110 / 1300cc / R5 Turbo (x2 external Ø 41.44 - x2 external Ø 41)
Reference : 4060
Ce produit est actuellement indisponible à la vente
Ready to install, the lubrication hole must be drilled after installation in the block.
€130.00
€56.00
€14.00
€72.00
€10.00
€8.50
€50.00
€650.00
Set of 4 liners and pistons Ø 75.7mm with segment and pins - R8G/A110 (1296cc)
Reference : 4068
En stock
€496.00
€112.00
€10.00
€10.00
€10.00
€8.00
Threaded sleeve for oil filter (Ø 3/4" - 16UNF) - ref 0608144100
Reference : 4075
En stock
Length: 60mm
Possibility of adaptation on other engines without oil filter
Possibility of adaptation on other engines without oil filter
€9.00
€56.00
€56.00
€24.00
Oil pressure sender (pressure and alert) - ref 7700542924
Reference : 4079
En stock
Pressure: 0 - 6 bar
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (1223)
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (1223)
€67.00
High flow oil pump (Pinion height 31mm) - R8G / A110 / R5 Alpine (1255cc / 1296cc / 1400cc engine)
Reference : 4080
En stock
Height of the joint plane / bottom of the strainer: 140mm
€124.00
Oil filter plate with threaded sleeve for oil cooler assembly
Reference : 4083
En stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
€84.00
€32.00
€46.00
€11.00
€11.00
Stainless steel braided oil radiator hose - Dash10 (inner Ø 14.20mm) - sold by the meter
Reference : 4088
En stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
€46.00
€134.00
€159.00
€176.00
Aluminum engine oil sump - partitioned and large capacity (small bearing block) - ref 6000000001
Reference : 4092
Ce produit est actuellement indisponible à la vente
Housing depth 147mm
€680.00
Oil filter (Large model)
Reference : 4093
Ce produit est actuellement indisponible à la vente
Thread Ø3/4" - 16UNF
€9.00
Drain plug - M18x150
Reference : 4094
En stock
Also suitable for replacing the M18x150 probe on the AVP4204 water pump bracket
€2.50
Aluminum rocker cover - original remanufacturing with the "G" for R5 Alpine cylinder head
Reference : 4096
This product is currently not available for sale!
oil filter
Reference : 4098
Ce produit est actuellement indisponible à la vente
Thread Ø3/4" - 16UNF
€9.00
Intake exhaust manifold gasket - R8 / R8.S / A110.V85 / R12 - ref 7000500971
Reference : 4099
En stock
€7.50
€4.00
Self-lubricating bronze centering ring in flywheel (Ø 12x16x20mm) - ref 6045759 / 7700553174
Reference : 4101
En stock
€5.50
Clutch disc - 20 splines Ø160mm
Reference : 4103
Ce produit est actuellement indisponible à la vente
€36.00
Ice clutch mechanism Ø 160mm (distance between fixing holes 50mm)
Reference : 4104
En stock
Assembly only with graphite stopper
€98.00
€68.00
Clutch disc 20 splines Ø 181mm
Reference : 4107
En stock
R8G / A110 (1255cc /1296cc)
R5 Alpine (1223)
R5 Alpine Turbo (122B)
R5 Alpine (1223)
R5 Alpine Turbo (122B)
€46.00
Original window mechanism Ø 181mm - R8G (1255 cc / 1296 cc)
Reference : 4108
En stock
Assembly only with graphite stopper
€159.00
Diaphragm mechanism - Ø181mm - Fixing center distance 55mm (for guided stop)
Reference : 4109
Ce produit est actuellement indisponible à la vente
R8G / A110 (1255 cc /1296 cc ) Centering pins to be removed
R5 Alpine (1223)
R5 Alpine Turbo (122B)
R5 Alpine (1223)
R5 Alpine Turbo (122B)
€77.00
Guide for guided clutch bearing adaptation
Reference : 4110
En stock
Sold with 3 fixing screws and oil seal
€62.00
€18.00
Oil filter sleeve nut (Ø 3/4" - 16UNF) -ref 0608144400
Reference : 4112
En stock
For tightening the oil filter plate on the engine block
€7.00
€20.00
€8.00
Synchro first (external cone at 6°40') - gearbox 330 / 353 / 364 / 365 - ref 0428406100 / 7700557051
Reference : 4117
En stock
Suitable for gearboxes:
- Bv 330 / 353 / 364
- Bv 365-05 / 365-10 / 365-20 / 365-33
- Bv 330 / 353 / 364
- Bv 365-05 / 365-10 / 365-20 / 365-33
€27.00
Second synchro (Outer cone at 6°40') - gearbox 330 / 353 / 364 / 365 - ref 0428406300 / 7700557052
Reference : 4118
En stock
Suitable for gearboxes:
- Bv 330 / 353 / 364
- Bv 365-05 / 365-10 / 365-20 / 365-33
- Bv 330 / 353 / 364
- Bv 365-05 / 365-10 / 365-20 / 365-33
€27.00
€14.00
Kit of 2 gear control oil seals (for perfect sealing) - gearbox 330/353 - 12X30X8
Reference : 4123
En stock
€5.50
Oil seal meter socket - box 330 /353 / 364 / 365 / 385 / NG5 - 8x16x7 - ref 7700551449
Reference : 4124
En stock
€2.50
€142.00
Conical torque bearing on gearbox pinion 353 - 32x72x19
Reference : 4127
En stock
Off-center groove for clips
€128.00
Differential bearing - gearbox 330/ 353/ 364/ 365 - 35x72x18.5 - ref 0857568100
Reference : 4128
En stock
€44.00
Biconical bearing - 25x52x35 - ref 0857668900 / 7700725747 / 7703090021
Reference : 4129
Ce produit est actuellement indisponible à la vente
€146.00
Primary shaft bearing with groove - 17x40x16 - ref 0857668900 / 7700725747 / 7703090021
Reference : 4130
Ce produit est actuellement indisponible à la vente
€140.00
Biconical bearing - 25x67x40.5 - Box 330 / 353/ 364 / 365 - ref 0852957000 / 7700725747 / 77703090181
Reference : 4131
En stock
€188.00
€3.50
€9.00
€99.00
€76.00
Fork with spring for ball bearing
Reference : 4140
En stock
Suitable for "original ball thrust bearing" type assembly or for conversion with a guided thrust bearing
€45.00
Speed control plate - ref 7701501597
Reference : 4142
Ce produit est actuellement indisponible à la vente
€59.00
€8.00
€7.00
€2.50
Clutch receiver Ø30mm - Matra djet
Reference : 4150
En stock
For threaded supply connection in Ø 3/8" - 24UNF ( 9.52mm )
€42.00
€78.00
€4.00
€32.00
Reinforced diaphragm mechanism - Ø180mm - R8 and R5 alpine (to be fitted only with disc ref 4155)
Reference : 4154
Ce produit est actuellement indisponible à la vente
€110.00
Reinforced disc with 3 damped pads - Ø 180mm / 20 splines
Reference : 4155
Ce produit est actuellement indisponible à la vente
R8 / A110 / R5 alpine (1223)
€185.00
Primary shaft nut (M20x150 - Right hand pitch) - Box 353 / 364 / 365 / 385 - ref 0608308500
Reference : 4156
En stock
Suitable for the following gearboxes:
- Box 353
- Box 364-05 / 364-06
- Box 365-00 / 365-02 / 365-10 / 365- 14 / 365-20 / 365-24 / 365-28 / 365-29 / 365-33
- Box 385
- Box 353
- Box 364-05 / 364-06
- Box 365-00 / 365-02 / 365-10 / 365- 14 / 365-20 / 365-24 / 365-28 / 365-29 / 365-33
- Box 385
€4.00
€3.00
€3.50
€44.50
€11.00
€15.50
€17.00
€15.00
€1.25
€34.00
€7.50
€17.00
€12.50
€12.50
€14.00
€66.00
€36.00
Water pump belt - 13x1015mm (For 812 engine with aluminum pulley)
Reference : 4219
En stock
For 812 engine
€10.00
Oil breather hose to be cut - Ø14x19mm (length 1m)
Reference : 4221
Ce produit est actuellement indisponible à la vente
€9.00
Adaptable radiator cooling propeller - 8 blades Ø364 mm
Reference : 4222
Ce produit est actuellement indisponible à la vente
€20.00
€22.00
€5.00
€32.00
Rubber hose from vase to radiator - Ø 8 x 14 (sold by the meter) - ref 0608269300
Reference : 4228
En stock
€4.00
Trumpet strap - width 30mm - thickness 7.5 mm
Reference : 4301
Ce produit est actuellement indisponible à la vente
€7.50
Trumpet strap - width 50mm - thickness 7.3 mm
Reference : 4302
Ce produit est actuellement indisponible à la vente
€9.50
€119.00
€7.50
€36.00
€7.00
€10.00
€5.00
Handbrake cable clip on tie rod
Reference : 4315
Ce produit est actuellement indisponible à la vente
€2.75
Kit of 6 parts to be welded for conversion of rear cross member from 2 to 4 shock absorbers - R8G
Reference : 4316
Ce produit est actuellement indisponible à la vente
Can also fit on Caravelle and Floride S trumpets
€190.00
€136.00
Pair of "Standard Calibration" rear shock absorbers - R8.G / Alpine A110 (Rear cross member 4 shock absorbers)
Reference : 4318
En stock
Fixing eye width 21mm
Lower fixing screw Ø 9mm
Lower fixing screw Ø 9mm
€158.00
€4.50
Pair of Rear "Intermediate Calibration" shock absorbers - R8.G / Alpine A110 (Rear crossmember 4 shock absorbers)
Reference : 4320
En stock
Fixing eye width 21mm
Lower fixing screw Ø 9mm
Lower fixing screw Ø 9mm
€246.00
€91.00
€91.00
€5.00
€3.75
€62.00
Rear wheel shaft oil seal - 38x52x8
Reference : 4326
En stock
Ditto for Dauphine - Floride : R1094 / R1095
€4.50
€6.00
€6.00
€41.00
€18.00
€19.00