In stock
Steering and Front Axle Super 5 / Super 5 GT Turbo
Our spare parts for the steering and front axle of your Renault Super 5 / Super 5 GT Turbo
Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Renault Super 5 / Super 5 GT Turbo
Whether you are looking for steering rods, rack bellows, flexor, steering ball joint, universal joint, suspension wishbone, front wishbone repair kit, silentbloc, engine mount, universal joint bellow, Meca indus pin...at AVP, Arnaud Ventoux Pièces, you will find everything you need you need to bring your old one back to life with quality components.
Diameter on the rack side: M12x100 (Right hand thread)
Diameter on the steering ball side: M14x150 (Right hand thread)
In stock
Cone diameter: Top of cone Ø12mm / Bottom of cone Ø 15mm
Cone axis: M10x125
Ball joint / tie rod axis: M14x150 (Right hand thread)
In stock
In stock
Steering rack repair kit with bushings and seals - R4 / R5 and Super 5 (All models) - Ref 7701455251
Plastic ring dimensions: Ø 21x30mm
Plastic ring width: 14mm
Kit contents:
Plastic guide ring x1
Rubber sealing gasket x2
Steel washer x2
Internal circlip x1
Renault OE part number: 7701455251
In stock
In stock
In stock
In stock
Super 5 GT Turbo
In stock
The mounting points on the strut (screws) are aligned.
Shock absorbers with original calibration give you the option to replace your shock absorbers with models that provide comfort and handling comparable to those...
In stock
The mounting points on the strut (screws) are offset.
Shock absorbers with original calibration give you the option to replace your shock absorbers with models that provide comfort and handling comparable to those...
In stock
Suitable for the following vehicles:
Super 5 GT Turbo: Phase 1: From 1984 -> 05/1987
Super 5 GTE: From 1987 -> End of Series
In stock
Suitable for the following vehicles:
Super 5 GT Turbo: Phase 2: From 06/1987 -> End of Series
In stock
Suitable for the following vehicles:
Super 5 GT Turbo: Phase 1: From 1984 -> 05/1987
Super 5 GTE: From 1987 -> End of Series
In stock
Pair of Front Shock Absorbers / Maxigaz - Super 5 GT Turbo (Phase 2 - From 06/1987 to end of series)
Suitable for the following vehicles:
Super 5 GT Turbo: Phase 2: From 06/1987 -> End of Series
In stock
In stock
In stock
In stock
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
In stock
In stock
In stock