In stock
Floride rear axle
Our spare parts for the rear axle of the Renault Floride
Discover here a wide choice of parts to maintain or restore the rear axle of your Renault Floride
Whether you are looking for shock absorbers, suspension springs, bellows, strap, silentbloc of gearbox, engine mount, reinforcement of crossmember, anti-roll bar, stud, wheel nut...at AVP, Arnaud Ventoux Pièces, you will find everything you need to breathe new life into your old with quality components.
In stock
Metal band hose clamp with pin lock
Metal band width: 9 mm
Clamp length: 500 mm
Maximum diameter: Ø 150 mm
In stock
In stock
Trumpet Dice Dimensions:
Inner Diameter: Ø 18.4mm
Outer Diameter: Ø 29.96mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.80mm
Shoulder Height: 4.20mm
Dice with dust seal.
Sold individually
Out of stock
Trumpet Dice Dimensions:
Inner Diameter: Ø 19.4mm
Outer Diameter: Ø 29.96mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.80mm
Shoulder Height: 4.20mm
Dice with dust seal.
Sold individually
In stock
Trumpet Thimble Dimensions:
Inner Diameter: Ø 20.4mm
Outer Diameter: Ø 30.00mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.90mm
Shoulder Height: 3.60mm
Sold in pairs
In stock
In stock
In stock
In stock
Suitable for:
Floride: From 1956 to 09/1960 then from 06/1964 to 12/1966
Floride S and Caravelle: From 06/1964 to the end of the series or in case of modification with a rear crossmember with 4 shock absorbers (Type...
In stock
Suitable for:
Florida: From 10/1960 to 05/1964
In stock
Œil de fixation inférieur largeur : 21mm
Diamètre intérieur d'œil de fixation inférieur : Ø 9mm
In stock
Suitable for:
R8.G (R1134 / R1135) from 10/1964 to 1974
Alpine A110 : 1100cm³ / 1300cm³ / 1600cm³ (except SX / SI and SC)
Shock absorber stiffness adjustment possible.
Versatile "sporty driving" shock absorbers,...
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
Suitable for:
Dauphine R1094 / R1095 (Disc Brake)
Caravelle / Floride (Disc Brake)
R8G (Disc Brake)
Alpine A108 / GT4 (Disc Brake)
Alpine A110
Simca 1000 / 1000Coupé / 1200S / R1 / R2 / R3 / CG: Front and Rear...
In stock
ATTENTION: Suitable for mounting "small" original brakes with original caliper and brake disc
Kit for mounting large wheel bearings on the rear axle, including:
2 Bearing carriers machined from 42CrMo4 hardened and...
In stock
In stock
In stock
In stock
In stock
Out of stock
Out of stock
In stock
In stock
AVP recommends the reinforced gearbox side silentblocks Ref 4305, for reasons of reliability and ease of assembly.
In stock
These bushings replace the original bushings; no modifications are required.
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Metric tap (ISO 6H tolerance): M10x150 (Right-hand thread)
Tap length (Overall): 80 mm
Mounting recess: 8 mm square
Pointed point tap, suitable for: Through holes
Machine tap: Only one tap is needed to create a...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
In stock
In stock
In stock