Alpine A110 / R5 engine - 1397cc bore 76
There are 104 products.
Set of liners and pistons Ø 76mm with pin and segment - R5 Alpine (1223) - 1397cc engine (Type 840.25)
Reference : 5001
En stock
€396.00
€88.00
Kit of 4 liner base O-rings Ø 77.2mm
Reference : 5012
En stock
For piston kit liner Ø 76mm (AVP5001 and AVP5050)
€6.00
Set of connecting rod bearings (Large levels) Ø 43.98 mm - STD (Original dimension)
Reference : 6016
En stock
Thickness: 1.80mm Width: 17.75mm
€36.00
Set of connecting rod bearings (Large levels) Ø 43.73mm - Repair dimension (+0.25)
Reference : 6017
En stock
Width: 17.75mm
€37.00
Set of connecting rod bearings (Large levels) Ø 43.48mm - Repair dimension (+0.50)
Reference : 6018
En stock
Width: 17.75mm
€37.00
Set of connecting rod bearings (Large levels) Ø43.23mm - Repair dimension (+0.75)
Reference : 6001
En stock
Width : 17.15mm
€39.00
Set of crankshaft main bearings Ø 54.80mm (Large levels) - STD (Original dimension)
Reference : 6019
En stock
Thickness 1.95mm
€48.00
Set of crankshaft main bearings Ø 54.55mm (Large levels) - Repair dimension (+0.25)
Reference : 6020
En stock
€49.00
Set of crankshaft main bearings Ø 54.3mm (Large levels) - Repair dimension (+0.50)
Reference : 6021
En stock
€49.00
Set of crankshaft main bearings Ø54.05mm (Large levels) - Repair dimension (+0.75mm)
Reference : 6002
En stock
€52.00
Set of side shims (Large levels) - Thickness 2.85mm (STD Original dimension)
Reference : 6050
En stock
€13.00
Set of side shims (Large levels) - Thickness 2.90mm (Repair dimension + 0.05mm)
Reference : 60141
En stock
€14.00
Set of side shims (Large levels) - Thickness 2.95mm (Repair dimension + 0.10mm)
Reference : 6022
En stock
€14.00
Set of side shims (large bearings) - Thickness 3.10mm (repair dimension + 0.25mm)
Reference : 6083
En stock
€14.00
€21.00
€21.00
Kit of 16 valve half moons Ø 8mm
Reference : 60142
En stock
Suitable for valves with a groove in the upper position (type KK) and for stem diameter 8mm
€19.00
€12.00
€13.00
€149.00
Kit of 16 valve spring washers (1400cc engine) - Ref 7703053261 (8 pieces) and Ref 7703053158 (8 pieces)
Reference : 5008
En stock
€98.00
€14.00
€14.00
Camshaft tappet Ø19mm - R5A (1223) / R5A Turbo (122B) / Turbo 2 (8220) - ref 7700658371 / 6001002128
Reference : 5035
En stock
Heat treatment 60 HRC on 1 mm depth
€18.00
€10.50
Cylinder head bolt M10 - R5 Alpine (1223) / R5 Alpine Turbo (122B) - ref 7700618680
Reference : 5037
En stock
Length under head 160mm
€19.00
Camshaft ring - Ø 34.5mm (inner) x Ø 38mm (outer)
Reference : 5027
Ce produit est actuellement indisponible à la vente
€32.00
Set of 4 camshaft rings (x2 outer Ø 41.44mm - x1 Ø 41mm - x1 Ø38mm) + AVP5027 ring (x1)
Reference : 5031
Ce produit est actuellement indisponible à la vente
The lubrication hole must be drilled after installation in the block.
€118.00
Complete set of engine gaskets - R5 Alpine (1223) and Alpine turbo (122B)
Reference : 5010
En stock
Thickness: 1.60mm
€84.00
€28.00
€8.50
One-piece oil sump gasket - Cléon engine (Large bearing)
Reference : 5094
En stock
Material: all rubber
€26.50
€5.00
€8.00
U-shaped rocker cover rubber seal
Reference : 5018
En stock
R5 Alpine (1223) / Alpine turbo (122B) / Turbo (8220)
€20.00
€4.50
Timing kit with chain - sprockets (x2) - cork casing gasket - oil seal
Reference : 4019
En stock
Single chain 58 links
Sprocket 17 teeth and 34 teeth
Sprocket 17 teeth and 34 teeth
€79.00
€14.00
€52.00
€18.00
€128.00
Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200
Reference : 5009
En stock
Compatible avec :
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
€12.00
Bolt with washer and camshaft sprocket retainer - R8G 1130 / 1255 / 1296 and A110.1300S / G
Reference : 40143
En stock
€6.50
€2.00
€7.00
Oil pressure sender (pressure and alert) - ref 7700542924
Reference : 4079
En stock
Pressure: 0 - 6 bar
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (1223)
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (1223)
€67.00
Oil contact mano extension - Male / Female - M14x150
Reference : 5091
En stock
For mounting the oil pressure sender (AVP4079) on the R5 alpine engine
€13.00
€1.50
€1.75
High flow oil pump (Pinion height 31mm) - R8G / A110 / R5 Alpine (1255cc / 1296cc / 1400cc engine)
Reference : 4080
En stock
Height of the joint plane / bottom of the strainer: 140mm
€124.00
€18.00
€19.50
€44.50
€79.00
R8G water pump bracket - ref 6080634
Reference : 4204
En stock
Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact.
€85.00
€9.00
€3.00
€3.50
Thermostat - Opening temperature 75°C
Reference : 4070
Ce produit est actuellement indisponible à la vente
€10.00
€10.00
€10.00
€9.50
€9.50
€18.00
€6.50
Self-lubricating bronze centering ring in flywheel (Ø 12x16x20mm) - ref 6045759 / 7700553174
Reference : 4101
En stock
€5.50
Aluminum rocker cover - original remanufacturing with the "G" for R5 Alpine cylinder head
Reference : 4096
En stock
€420.00
Aluminum engine oil sump - partitioned and large capacity - Alpine R5 block (Big bearing)
Reference : 5014
Ce produit est actuellement indisponible à la vente
Casing depth 147mm
€680.00
€9.00
€16.50
€56.00
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 2 Liters
Reference : C079
Ce produit est actuellement indisponible à la vente
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€24.00
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 5 Liters
Reference : C080
En stock
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€55.00
Engine oil (Mineral and Multigrade) "ELF HTX Prestige" - 20w50 - 5 Liters
Reference : C081
En stock
HTX PRESTIGE 20W-50 oil is a mineral engine oil suitable for
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
€62.00
Universal coolant 5L (-25°)
Reference : C025
En stock
Ready to use
Yellow color
Only delivery in France
Yellow color
Only delivery in France
€12.50
€29.00
€31.00
€8.00
€6.95
Oil filter plate with threaded sleeve for oil cooler assembly
Reference : 4083
En stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
€84.00
€32.00
€46.00
€46.00
Black braided oil radiator hose - Dash10 (inner Ø 14.2mm) - Sold by the meter
Reference : 4029
En stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
€46.00
€11.00
€1.00
€11.00
Stainless steel braided oil radiator hose - Dash10 (inner Ø 14.20mm) - sold by the meter
Reference : 4088
En stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
€46.00
€0.50
€134.00
€159.00
€176.00
€16.00
Valve lapping kit (Lapping 2 sizes + lapping paste)
Reference : T013
En stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
x1 pot of coarse grain 120 lapping paste
€30.00
€30.00
Kit for interior treatment of engine block, gearbox housing
Reference : C019
En stock
Only delivery in France
Epoxy coating for the interior of the engine block.
0.5kg of resin and hardener
0.5l of thinner
Epoxy coating for the interior of the engine block.
0.5kg of resin and hardener
0.5l of thinner
€42.00
Paint thinner - 1 liter
Reference : C024
En stock
Only delivery in France
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
€16.00
Paint for engine block - Aluminum gray - RAL 9006
Reference : C026
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Aluminum gray RAL 9006
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Aluminum gray RAL 9006
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Black - RAL 9005
Reference : C015
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: RAL 9005 BLACK
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: RAL 9005 BLACK
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Dark green - RAL 6005
Reference : C016
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: green RAL 6005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: green RAL 6005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Bright blue - RAL 5005
Reference : C021
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Bright blue RAL 5005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Bright blue RAL 5005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Brown red - RAL 3011
Reference : C022
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Red brown RAL 3011
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Red brown RAL 3011
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Fire red - RAL 3000
Reference : C023
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Fire red RAL 3000
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Fire red RAL 3000
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00