Ignition & electricity Simca / CG
Our ignition and electrical parts for Simca / CG
Harness for assembly with reel on rear valance
Wire spool 50cm
In stock
Harness for mounting with the coil on the left rear wing
Coil wire length: 63cm
Ignition wire length: 49cm / 53cm / 58cm / 62.5cm
In stock
In stock
In stock
Compatible for any Ducellier igniter with an inside diameter of the body of 58.8mm
In stock
In stock
Simca 1000
Alpine A310/6 / Renault R30 (PRV engine)
Renault R5 Alpine (1223)
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
Not suitable for an igniter...
In stock
Compatible with Ducellier igniters with an inner body diameter of Ø 58.8 mm
CAUTION : Not suitable for igniters with externally adjustable contact breakers (different plate attachment points)
Supplied with 3 screws...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
Not suitable for an...
In stock
Compatible with Ducellier igniters with an inner body diameter of Ø 58.8mm
WARNING: Not suitable for igniters with externally adjustable contact breakers (different plate attachment points)
Supplied with 3 screws for...
In stock
Primary winding resistance: 2.8 ohms
Secondary winding resistance: 7900 ohms
Coil compatible with electronic ignition kits Ref AVP4798 and Ref AVP4799
In stock
In stock
Suitable for:
A110.1600 S / R12.G / R17.G
A310.4 (VE and VF)
Simca Rallye 2 and Rallye 3 (Prepared engine)
In stock
The central unit is connected as follows:
The 12V power supply (+ battery) wire on the "X" or "+" terminal
The Switch or stalk control wire on the "L" or "Z" terminal
The repeater indicator light wire (LED) on the...
In stock
For use with a temperature meter (water or oil)
In stock
Fan trigger temperature 82°C
Fan stop temperature 72°C
In stock
Fan trigger temperature 88°C
Fan stop temperature 79°C
In stock
Fan trigger temperature 92°C
Fan stop temperature 82°C
In stock
In stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 125l/h
Max pressure: 0.30bar
Suction: -0.10bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm /...
In stock
In stock
In stock
Out of stock
In stock
In stock
In stock
Sold individually
12V-55W H3 bulb supplied
In stock
In stock
In stock
In stock
In stock
In stock
Out of stock
In stock
In stock
H4 bulb = Halogen bulb
BaseP45t = Fixing base round base
Out of stock
H4 bulb = Halogen bulb
Base P45t = Fixing base round base
In stock
Out of stock
In stock
Out of stock
Out of stock
Delivered without fuses
Dimensions: Lg 86mm x W 53mm x H43mm - Fixing distance: 71mm
In stock
Delivered without fuses
Dimensions: Lg 118mm x W 53mm x H 43mm - Fixing distance: 107mm
In stock
Delivered without fuses
Dimensions: Lg 154mm x W 53mm x H 43mm - Fixing distance: 144mm
In stock
Delivered without fuses
Dimensions: Lg 185mm x W 53mm x H 43mm - Fixing distance: 175mm
Out of stock
In stock
In stock
Cleans the contacts and ensures the closing of the electrical contacts.
Protects against humidity.
Only delivery in France
In stock
This set contains the following fuses:
5A(x2) + 8A(x2) + 10A(x2) + 16A(x2) + 25A(x2)
In stock