Alpine A110 / 1300 S / 1296cc engine
There are 135 products.
Set of 4 liners and pistons Ø 75.7mm with segment and pins - R8G/A110 (1296cc)
Reference : 4068
En stock
€496.00
€93.00
€112.00
€650.00
€755.00
€254.00
€112.00
€11.00
Set of connecting rod bearings (Small levels) Ø 43.98mm - STD (Original dimension)
Reference : 4048
En stock
Thickness: 1.81mm
Width: 20.75mm
Width: 20.75mm
€44.00
Set of connecting rod bearings (Small levels) Ø 43.73mm - Repair dimension (+0.25)
Reference : 4049
En stock
€44.00
Set of connecting rod bearings (Small levels) Ø 43.48mm - Repair dimension (+0.50)
Reference : 4050
En stock
€44.00
Set of crankshaft main bearings (small bearings) Ø 46mm - STD (Original dimension)
Reference : 4051
En stock
Thickness: 1.92mm
€44.00
Set of crankshaft main bearings (small bearings) Ø 45.75mm - Repair dimension (+0.25)
Reference : 4052
En stock
€44.00
Set of crankshaft main bearings (small bearings) Ø 45.50mm - Repair dimension (+0.50)
Reference : 4053
En stock
€44.00
€16.00
€16.00
€16.00
€16.00
Exhaust valve - Ø32.7x7 (original Ø engine 804 and 812)
Reference : 4056
En stock
Valve with low keyway
€23.00
Exhaust valve (specific) - Ø 32.5x7x88mm - R8G / A110 (1255 and 1296 engine)
Reference : 4028
En stock
Exhaust valve without shoulder on the keying side to limit smoke caused by oil rising.
Valve with low keyway
Valve with low keyway
€27.00
Intake valve - Ø35x7mm (original Ø engine 804 and 812)
Reference : 4055
En stock
Same valve for switching to large exhaust valve Ø35x7
Valve with low keyway
Valve with low keyway
€23.00
Big inlet valve Ø38x7mm
Reference : 4057
Ce produit est actuellement indisponible à la vente
Valve with low keyway
€23.00
Intake valve (specific) - Ø 35x7x88mm - R8G / A110 (1255 and 1296 engine)
Reference : 4027
En stock
Exhaust valve without shoulder on the keying side to limit smoke caused by oil rising.
Valve with low keyway
Valve with low keyway
€26.00
€13.00
Kit of 8 upper valve retainer cups (1100cc and 1300cc engine) - Ref 0003814700 (38147)
Reference : 4033
En stock
Compatible with :
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
€248.00
€161.00
Kit of 8 valve spring washers (Engine 1108cc and 1300cc) - Ref 0003812600 (38126)
Reference : 4035
En stock
Compatible with :
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
- Alpine A110 1100G and 1300G/S
€59.00
Kit of 16 valve half moons Ø7mm
Reference : 40116
Ce produit est actuellement indisponible à la vente
Suitable for valves with a groove in the lower position (type BK) and for stems with a diameter of 7mm
€59.00
€98.00
Set of 8 standard length push rods - 1255cc
Reference : 40117
Ce produit est actuellement indisponible à la vente
Length: Intake 166mm
Exhaust 189mm
Exhaust 189mm
€149.00
Push rod set 2mm longer - Lg: Adm 168mm / Exhaust 191mm
Reference : 40118
En stock
2mm longer rod for recut camshafts.
Length: Intake 168mm
191mm exhaust
Length: Intake 168mm
191mm exhaust
€138.00
€186.00
Set of 4 engine camshaft rings 812 - R8 G / A110 / 1300cc / R5 Turbo (x2 external Ø 41.44 - x2 external Ø 41)
Reference : 4060
En stock
Ready to install, the lubrication hole must be drilled after installation in the block.
€148.00
Set of 4 connecting rod bushings
Reference : 40122
Ce produit est actuellement indisponible à la vente
€63.00
Engine gasket set (without cylinder head gasket) - 1255cc / 1296cc engine
Reference : 4012
Ce produit est actuellement indisponible à la vente
€116.00
€56.00
€56.00
€56.00
€72.00
€14.00
€8.50
€8.50
€32.00
€1.00
€2.00
€8.50
€28.00
€9.50
€4.50
Timing kit with chain - sprockets (x2) - cork casing gasket - oil seal
Reference : 4019
En stock
Single chain 58 links
Sprocket 17 teeth and 34 teeth
Sprocket 17 teeth and 34 teeth
€79.00
€14.00
€52.00
€18.00
€128.00
Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200
Reference : 5009
En stock
Compatible avec :
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
€12.00
Camshaft end washer (1108cc / 1300cc / 1400cc engine) - Ref 0608441400
Reference : 6004
En stock
Compatible with :
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 and 2 (1397cc)
- R12.TS (1289cc)
- R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 and 2 (1397cc)
- R12.TS (1289cc)
€18.00
Bolt with washer and camshaft sprocket retainer - R8G 1130 / 1255 / 1296 and A110.1300S / G
Reference : 40143
En stock
€6.50
€15.00
Self-lubricating bronze centering ring in flywheel (Ø 12x16x20mm) - ref 6045759 / 7700553174
Reference : 4101
En stock
€5.50
€9.50
€44.50
€79.00
R8G water pump bracket - ref 6080634
Reference : 4204
En stock
Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact.
€85.00
€9.00
€3.00
€3.50
€3.00
€9.00
Thermostat - Opening temperature 75°C
Reference : 4070
Ce produit est actuellement indisponible à la vente
€10.00
€10.00
€10.00
Water pump belt - 13x975mm (For 812 engine with original sheet metal pulley)
Reference : 4005
En stock
€14.00
Water pump belt - 13x1015mm (For 812 engine with aluminum pulley)
Reference : 4219
En stock
For 812 engine
€10.00
€76.00
Aluminum alternator pulley - 1300cc - ref 0870333100
Reference : 4044
Ce produit est actuellement indisponible à la vente
€32.00
Aluminum crankshaft pulley - Ø 148mm
Reference : 4045
Ce produit est actuellement indisponible à la vente
€83.00
€2.00
€16.00
Ducellier 4136 distributor (Curve R230) without depression
Reference : 4769
Ce produit est actuellement indisponible à la vente
R8G/A110 (1108cc/1255cc/1296cc)
€326.00
Ducellier 4136 ignition without depression (R230 curve) with integrated electronic ignition kit 12V
Reference : 4774
Ce produit est actuellement indisponible à la vente
This lighter is suitable for:
- R8G / A110 (1108cc / 1255cc / 1296cc)
Kit to be used with a primary resistance coil between 2.5 and 3.5 ohms
Compatible with AVP4708 and AVP4715 coils
- R8G / A110 (1108cc / 1255cc / 1296cc)
Kit to be used with a primary resistance coil between 2.5 and 3.5 ohms
Compatible with AVP4708 and AVP4715 coils
€388.00
€24.00
€3.50
Oil cap sticker "Renault ELF Prestigrade Sport Supra Renault" - exterior Ø48mm
Reference : 0035
En stock
€4.00
€1.50
€1.75
High flow oil pump (Pinion height 31mm) - R8G / A110 / R5 Alpine (1255cc / 1296cc / 1400cc engine)
Reference : 4080
En stock
Height of the joint plane / bottom of the strainer: 140mm
€124.00
€18.00
€19.50
Oil pressure sender (pressure and alert) - ref 7700542924
Reference : 4079
En stock
Pressure: 0 - 6 bar
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (1223)
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (1223)
€67.00
Threaded sleeve for oil filter (Ø 3/4" - 16UNF) - ref 0608144100
Reference : 4075
En stock
Length: 60mm
Possibility of adaptation on other engines without oil filter
Possibility of adaptation on other engines without oil filter
€9.00
Oil filter sleeve nut (Ø 3/4" - 16UNF) -ref 0608144400
Reference : 4112
En stock
For tightening the oil filter plate on the engine block
€7.00
€9.00
€30.00
€6.95
Carburetor stand support paper gasket - ref 0857659300
Reference : 6851
En stock
To be fitted with reference 6809
€2.50
€16.50
€56.00
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 2 Liters
Reference : C079
Ce produit est actuellement indisponible à la vente
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€24.00
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 5 Liters
Reference : C080
En stock
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€55.00
Engine oil (Mineral and Multigrade) "ELF HTX Prestige" - 20w50 - 5 Liters
Reference : C081
En stock
HTX PRESTIGE 20W-50 oil is a mineral engine oil suitable for
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
€62.00
Universal coolant 5L (-25°)
Reference : C025
En stock
Ready to use
Yellow color
Only delivery in France
Yellow color
Only delivery in France
€12.50
€31.00
€29.00
€8.00
Aluminum engine oil sump - partitioned and large capacity (small bearing block) - ref 6000000001
Reference : 4092
Ce produit est actuellement indisponible à la vente
Housing depth 147mm
€680.00
Aluminum engine oil sump - partitioned and large capacity - Alpine R5 block (Big bearing)
Reference : 5014
Ce produit est actuellement indisponible à la vente
Casing depth 147mm
€680.00
€0.60
Drain plug - M18x150
Reference : 4094
En stock
Also suitable for replacing the M18x150 probe on the AVP4204 water pump bracket
€2.50
€36.00
€50.00
€36.00
Reinforced engine rear crossmember - A110.1600cc - ref 6000001243
Reference : 60130
Ce produit est actuellement indisponible à la vente
€398.00
Oil filter plate with threaded sleeve for oil cooler assembly
Reference : 4083
En stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
€84.00
€32.00
€46.00
€46.00
Black braided oil radiator hose - Dash10 (inner Ø 14.2mm) - Sold by the meter
Reference : 4029
En stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
€46.00
€11.00
€1.00
€0.50
€11.00
Stainless steel braided oil radiator hose - Dash10 (inner Ø 14.20mm) - sold by the meter
Reference : 4088
En stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
€46.00
€134.00
€159.00
€176.00
€16.00
Valve lapping kit (Lapping 2 sizes + lapping paste)
Reference : T013
En stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
x1 pot of coarse grain 120 lapping paste
€30.00
Kit for interior treatment of engine block, gearbox housing
Reference : C019
En stock
Only delivery in France
Epoxy coating for the interior of the engine block.
0.5kg of resin and hardener
0.5l of thinner
Epoxy coating for the interior of the engine block.
0.5kg of resin and hardener
0.5l of thinner
€42.00
Paint thinner - 1 liter
Reference : C024
En stock
Only delivery in France
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
€16.00
Paint for engine block - Aluminum gray - RAL 9006
Reference : C026
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Aluminum gray RAL 9006
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Aluminum gray RAL 9006
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Black - RAL 9005
Reference : C015
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: RAL 9005 BLACK
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: RAL 9005 BLACK
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Dark green - RAL 6005
Reference : C016
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: green RAL 6005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: green RAL 6005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Bright blue - RAL 5005
Reference : C021
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Bright blue RAL 5005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Bright blue RAL 5005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Brown red - RAL 3011
Reference : C022
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Red brown RAL 3011
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Red brown RAL 3011
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00
Paint for engine block - Fire red - RAL 3000
Reference : C023
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Fire red RAL 3000
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Fire red RAL 3000
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€29.00