Brake caliper piston for "Big brake caliper AVP6417 and AVP6416" - Ø48mm

• Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
• Compatible with coils AVP4708 and AVP4715
• Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
• Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
• 12V electronic ignition kit, with magnetic trigger which allows the elimination of the breakers and the capacitor
• Notice included
• Supplied with 3 screws for fixing the plate
• Instructions included

Suitable for:

• R4 /4L : Front Brake
• R5 : Front Brake
• R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
• R8: Big Brake Installation Front Brake
• R12 (All models) : Front Brake
• R15 / R16 / R17 (All models): Front Brake
• A110 : Big Brake Installation Front Brake
• A310.4 / A310 V6 (Pre-1980) : Front Brake

Brake pads with a retaining stop (B in the diagram) must be installed with this stop positioned towards front (direction of wheel rotation)

• Transforms rust into a stable, black layer
• Essential for inaccessible bodywork corners
• Apply neat and with a brush to all rusty surfaces

• Oil sump depth: distance from the mating surface to the bottom of the sump: 147 mm
• Aluminum sump with anti-surge baffle.
• Drain or sensor hole thread: M18x1.50
• Supplied with 3 gaskets and 3 drain plugs

• Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
• Compatible with coils AVP4708 and AVP4715
• Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
• Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
• 12V electronic ignition kit , with magnetic trigger which allows the elimination of the breakers and the capacitor
• Notice included
• Supplied with 3 screws for fixing the plate
• Instructions included

Can also fit on Caravelle and Floride S trumpets

• Diameter of the 3 holes for the strike plate mounting screws: M8x100