R8 / R8S engine (Type R1130 / R1132 / R1136) 956cc and 1108cc
There are 105 products.
Set of 4 pistons and 4 Ø70mm liners with segments and pin (Engine type 688)
Reference : 4001
En stock
€266.67
Set of 12 segments Ø70mm - 1.75Cx2x3.5
Reference : 4002
Ce produit est actuellement indisponible à la vente
€73.33
€76.67
€80.00
€73.33
Set of 12 liner base seals - Ø 75mm
Reference : 4015
En stock
Thicknesses: White Gasket: 0.06mm Black Gasket: 0.07mm Red Gasket: 0.09mm
€7.08
Set of connecting rod bearings (Small levels) Ø 43.98mm - STD (Original dimension)
Reference : 4048
En stock
Thickness: 1.81mm
Width: 20.75mm
Width: 20.75mm
€36.67
Set of connecting rod bearings (Small levels) Ø 43.73mm - Repair dimension (+0.25)
Reference : 4049
En stock
€36.67
Set of connecting rod bearings (Small levels) Ø 43.48mm - Repair dimension (+0.50)
Reference : 4050
En stock
€36.67
Set of crankshaft main bearings (small bearings) Ø 46mm - STD (Original dimension)
Reference : 4051
En stock
Thickness: 1.92mm
€36.67
Set of crankshaft main bearings (small bearings) Ø 45.75mm - Repair dimension (+0.25)
Reference : 4052
En stock
€36.67
Set of crankshaft main bearings (small bearings) Ø 45.50mm - Repair dimension (+0.50)
Reference : 4053
En stock
€36.67
Set of side shims (Small levels)- STD thickness 2.83mm (Original dimension)
Reference : 40160
En stock
688/689 engine
€10.83
Set of side shims (Small levels)- thickness 2.88mm (Repair dimension +0.05mm)
Reference : 40161
En stock
688/689 engine
€10.83
Set of side shims (Small levels)- thickness 2.93mm (Repair dimension +0.10mm)
Reference : 40162
En stock
688/689 engine
€10.83
Set of side shims (Small levels)- thickness 2.98mm (Repair dimension +0.15mm)
Reference : 40163
En stock
688/689 engine
€10.83
€10.00
€10.42
€15.00
Complete set of Cléon 956cc and 1108cc engine gaskets (Type 688-.. / 689-..) Ø 70mm - R8 / R8 Major / Caravelle
Reference : 4038
En stock
Head gasket with oblong holes
Suitable for engines:
1108cc engine: Type 688-02 / 688-06 / 688-09 (R8S R1136)
956cc engine: Type 689-01 / 689-03
Suitable for engines:
1108cc engine: Type 688-02 / 688-06 / 688-09 (R8S R1136)
956cc engine: Type 689-01 / 689-03
€51.67
Cylinder head gasket "oblong" holes Ø 72.3mm (Engine Type 688 / 689 / C1C-.. / C1E-..)
Reference : 40144
En stock
Thickness: 1.2mm (Original side)
Oblong “Lunules” type cylinder head gasket.
Oblong “Lunules” type cylinder head gasket.
€18.33
Cylinder head gasket "oblong" holes Ø 72.3mm (Engine Type 688 / 689 / C1C-.. / C1E-..)
Reference : 40145
En stock
Thickness: 1.7mm (repair side)
Oblong “Lunules” type cylinder head gasket.
Oblong “Lunules” type cylinder head gasket.
€20.00
Complete set of engine gaskets Ø 70mm - R8.TS FASA (1108cc engine)
Reference : 4081
En stock
Cylinder head gasket with cylindrical holes Ø 71mm
€56.67
Cylinder head gasket cylindrical holes Ø 71mm - ref 0428449300
Reference : 4014
En stock
Thickness 1.35mm
Suitable for:
R8 (956cc) and R8 (1108cc) TS (FASA)
R4 (956cc) F4 Van (FASA)
Suitable for:
R8 (956cc) and R8 (1108cc) TS (FASA)
R4 (956cc) F4 Van (FASA)
€18.33
€7.08
€5.83
€3.75
Timing kit with chain - sprockets (x2) - cork casing gasket - oil seal
Reference : 4019
En stock
Single chain 58 links
Sprocket 17 teeth and 34 teeth
Sprocket 17 teeth and 34 teeth
€65.83
€11.67
€43.33
€15.00
€106.67
Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200
Reference : 5009
En stock
Compatible avec :
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
- R8G R1134 (Moteur 1108cc - Type 804) / R1135 (Moteur 1255cc et 1296cc - Type 812)
- Alpine A110 1108cc / 1289cc (V85) / 1300G / 1300S
- R5 Turbo 1 et 2 (1397cc) / R5 Alpine Turbo / R5 Alpine
- R12.TS (1289cc)
€10.00
Bolt with washer and camshaft sprocket retainer - R8G 1130 / 1255 / 1296 and A110.1300S / G
Reference : 40143
En stock
€5.42
Cylinder head bolt - R4L - ref 0706305500
Reference : 4L-027
Ce produit est actuellement indisponible à la vente
Length under head 100mm
€1.67
€7.92
€13.33
Self-lubricating bronze centering ring in flywheel (Ø 12x16x20mm) - ref 6045759 / 7700553174
Reference : 4101
En stock
€4.58
Adaptable radiator cooling propeller - 8 blades Ø364 mm
Reference : 4222
Ce produit est actuellement indisponible à la vente
€16.67
€66.67
€9.17
€70.00
€38.33
R8G water pump bracket - ref 6080634
Reference : 4204
Ce produit est actuellement indisponible à la vente
Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact.
€70.83
kit of 6 water pump support studs
Reference : 4147
Ce produit est actuellement indisponible à la vente
€7.50
€2.50
€2.92
€2.50
€7.50
€30.00
€13.33
Igniter Ducellier 4375
Reference : 4770
Ce produit est actuellement indisponible à la vente
R4 - R6 - R8 - Caravelle - Matra jet - R12.TL - R12.TS - R15.TL - A110.V85 (810) - A110.GT4
Engine 688 / 689 / 810
For Ducellier reference: 4045 - 4069 - 4074 - 4075 - 4077 - 4118 - 4119 - 4125 - 4143 - 4144 - 4146 - 4150 - 4158 - 4167 - 4168 - 4223 - 4224 - 4225 - 4341 - 4 375 - 4387 - 4388 - 4462
Engine 688 / 689 / 810
For Ducellier reference: 4045 - 4069 - 4074 - 4075 - 4077 - 4118 - 4119 - 4125 - 4143 - 4144 - 4146 - 4150 - 4158 - 4167 - 4168 - 4223 - 4224 - 4225 - 4341 - 4 375 - 4387 - 4388 - 4462
€173.33
Ducellier 4375 igniter with vacuum capsule and integrated 12V electronic ignition kit
Reference : 4793
Ce produit est actuellement indisponible à la vente
Suitable for:
- R4 - R6 - R8 - Caravelle - Matra jet - R12.TL - R12.TS - R15.TL - A110.V85 (810) - A110.GT4
- Type 688 / 689 / 810 engine
This igniter is to be used with a primary resistance coil between 2.5 and 3.5 ohms.
- R4 - R6 - R8 - Caravelle - Matra jet - R12.TL - R12.TS - R15.TL - A110.V85 (810) - A110.GT4
- Type 688 / 689 / 810 engine
This igniter is to be used with a primary resistance coil between 2.5 and 3.5 ohms.
€218.33
Oil pump with shaft and pinion, without strainer (Rotor height 25mm)
Reference : 4010
En stock
Strainer to recover from the old pump
Suitable for type 688 / 689 engines:
Caravelle / R8 (1130 / 1132 / 1136)
Matradjet (1108cc)
Alpine GT4 (1100cc)
Suitable for type 688 / 689 engines:
Caravelle / R8 (1130 / 1132 / 1136)
Matradjet (1108cc)
Alpine GT4 (1100cc)
€65.00
€1.25
Oil pump drive pinion - ref 0555485700
Reference : 4031
En stock
11 tooth sprocket
- Height of the teeth 9mm
- Suitable for 688, 689, 810 and 840 engine.
- Height of the teeth 9mm
- Suitable for 688, 689, 810 and 840 engine.
€10.00
€1.46
€7.08
€9.17
€2.92
Oil cap sticker "Renault ELF Prestigrade Sport Supra Renault" - exterior Ø48mm
Reference : 0035
Ce produit est actuellement indisponible à la vente
€3.33
€7.50
€15.00
Monograde engine oil - SAE 50 - 5 Liters
Reference : C008
En stock
Thicker oil suitable for engines with cork seals.
€46.67
Engine oil (Mineral and Monograde) "ELF HTX Prestige" - SAE40 - 5 Liters
Reference : C078
En stock
The formula of HTX PRESTIGE SAE 40 engine oils has been designed
especially for vehicle engines manufactured between 1900 and
1950, for models without oil filters or with oil separator
cyclone.
This engine oil is compatible with most seals on
classic cars.
especially for vehicle engines manufactured between 1900 and
1950, for models without oil filters or with oil separator
cyclone.
This engine oil is compatible with most seals on
classic cars.
€46.67
€13.75
€46.67
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 2 Liters
Reference : C079
En stock
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€20.00
Engine oil (Mineral and Multigrade) "ELF HTX Collection" - 20w50 - 5 Liters
Reference : C080
En stock
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been manufactured since 1950.
The excellent viscosity balance of HTX COLLECTION 20W-50 oil
guarantees low-wear starts, even after long
periods of downtime, and also protects against wear and tear by
warm weather.
€45.83
Engine oil (Mineral and Multigrade) "ELF HTX Prestige" - 20w50 - 5 Liters
Reference : C081
En stock
HTX PRESTIGE 20W-50 oil is a mineral engine oil suitable for
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best
protection.
Compatible with most seals on classic cars.
€51.67
Universal coolant 5L (-25°)
Reference : C025
En stock
Ready to use
Yellow color
Only delivery in France
Yellow color
Only delivery in France
€10.42
€24.17
€25.83
€6.67
€5.79
Threaded sleeve for oil filter (Ø 3/4" - 16UNF) - ref 0608144100
Reference : 4075
En stock
Length: 60mm
Possibility of adaptation on other engines without oil filter
Possibility of adaptation on other engines without oil filter
€7.50
Oil filter sleeve nut (Ø 3/4" - 16UNF) -ref 0608144400
Reference : 4112
En stock
For tightening the oil filter plate on the engine block
€6.25
Red aluminum rocker cover - R12 / A110.V85 (1289cc)
Reference : 40135
Ce produit est actuellement indisponible à la vente
Sold with its seal only
€366.67
Polished aluminum rocker cover - R12 / A110.V85 (1289cc)
Reference : 6031
En stock
Sold with its seal only
€366.67
€10.83
€7.50
Oil filter plate with threaded sleeve for oil cooler assembly
Reference : 4083
En stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the replacement of these fittings and hoses.
€70.00
€26.67
€38.33
€38.33
Black braided oil radiator hose - Dash10 (inner Ø 14.2mm) - Sold by the meter
Reference : 4029
En stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
€38.33
€9.17
€0.83
€0.42
€9.17
Stainless steel braided oil radiator hose - Dash10 (inner Ø 14.20mm) - sold by the meter
Reference : 4088
En stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
€38.33
€111.67
€132.50
€146.67
€13.75
Valve lapping kit (Lapping 2 sizes + lapping paste)
Reference : T013
En stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
x1 pot of coarse grain 120 lapping paste
€26.67
€25.00
Kit for interior treatment of engine block, gearbox housing
Reference : C019
En stock
Only delivery in France
Epoxy coating for the interior of the engine block.
0.5kg of resin and hardener
0.5l of thinner
Epoxy coating for the interior of the engine block.
0.5kg of resin and hardener
0.5l of thinner
€35.00
Paint thinner - 1 liter
Reference : C024
En stock
Only delivery in France
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
€13.33
Paint for engine block - Aluminum gray - RAL 9006
Reference : C026
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Aluminum gray RAL 9006
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Aluminum gray RAL 9006
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€24.17
Paint for engine block - Black - RAL 9005
Reference : C015
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: RAL 9005 BLACK
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: RAL 9005 BLACK
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€24.17
Paint for engine block - Dark green - RAL 6005
Reference : C016
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: green RAL 6005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: green RAL 6005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€24.17
Paint for engine block - Bright blue - RAL 5005
Reference : C021
En stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Bright blue RAL 5005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Bright blue RAL 5005
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€24.17
Paint for engine block - Brown red - RAL 3011
Reference : C022
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Red brown RAL 3011
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Red brown RAL 3011
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€24.17
Paint for engine block - Fire red - RAL 3000
Reference : C023
En stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Fire red RAL 3000
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Fire red RAL 3000
Can be applied directly with a brush or with a spray gun by diluting the paint with the thinner reference C024.
€24.17