Paint for engine block - Dark green - RAL 6005

Same as original capacity: 27 liters

Provide a shaft extension on the igniter drive pinion side, possibility of making it with the old pump shaft (provide about 28mm)

• Sheet Dimensions: Length 58cm x Width 35cm
• Sheet Thickness: 1mm
• Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all other types of flat gaskets, except those in contact with vapors, up to a temperature limit of 120°C.
• Material made of fiber paper

Suitable for:

• Juvaquatre R2100 (4hp): Type 662-3 engine
• Dauphinois R2101 (5hp): Type 670-2 engine

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.