Crankshaft bearing set (Small bearing) Ø 46mm - STD (Original dimension)

These twin-tube hydraulic shock absorbers are designed for normal road use.

With a comfort setting close to the original shock absorbers, these are perfect for everyday use.

Features:

• Mounting eye width: 21mm
• Lower mounting eye inner diameter: Ø 9mm
• Shock absorbers sold by pair

Suitable for:

• R8G (R1134 / R1135): From 10/1964 to 1974
• Alpine A110: 1100cc / 1300cc / 1600cc (All models except A110 SC / SX and SI)
• Alpine GT4 (For rear crossmember with 4 shock absorbers)
• Floride S and Caravelle: From 06/1964 to the end... (For rear crossmember with 4 shock absorbers)

• Exhaust valve without shoulder on the keying side to limit smoke caused by oil rising.
• Valve with low keyway

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.