Water pump seal - ref 0555540000

Convient pour:

• R8 / A110: Frein Arrière (Montage Type gros frein)
• A310.4 (Tous modèles) : Frein Arrière
• A310.6 (Avant 1980) : Frein Arrière

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.

Sold without adjusting screws or handbrake lever. Caliper equipped with a square seal.

Suitable for:

• Dauphine / Dauphine Export (Disc brakes)
• R8 / Caravelle / Floride S
• A110 (Small brake setup)
• Matra Djet: Right Rear Brake Caliper

• Photo 2 shows the fabric finish (off-white, diamond-point finish)
• The part near the sun visors is made of hardboard.
• The mounting ribs from your old headliner should be kept.

Cap Dimensions:

• Inner Diameter: Ø 40mm
• Outer Diameter: Ø 42mm
• Height: 26.5mm

Also suitable for some R16 (R1150) models with rear drum brakes.