Adjustable camshaft sprocket for single chain (34 teeth)

The sprung sintered disc is equipped with 3 sintered metal pads and features damping springs.

It handles higher engine torque and provides more direct gear shifts.

• Installs as a direct replacement for the original disc.
• Compatible with the stock pressure plate; however, a reinforced pressure plate is recommended for greater durability.
• Suitable for both road and competition use, the sprung disc offers improved driving comfort by reducing vibrations and jolts.

Disc specifications:

• Outer diameter: Ø 180mm
• Number of splines: 20 splines
• Number of pads: 3
• Pad material: Sintered metal

Suitable for:

• R8
• A110
• R5 Alpine / R5 Alpine Turbo

Specialized valve stem seals for 6mm diameter valves

• Valve stem seal dimensions: Ø 5.5x11mm
• Material: Specialized rubber

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

Ideal for prepared engines or to replace a mechanical fuel pump.

• Flow rate: 125l/h
• Max pressure: 0.30bar
• Suction: -0.10bar
• 220° adjustable inlet and outlet tube: Ø 8mm
• Self-regulated fuel pump
• Dimensions: 73x126mm / Weight: 820g

Ideal for vehicles with the engine in the rear position with a tank at the front, pump to be positioned close to the tank.

It It is recommended to mount the pump horizontally, with the "Out" outlet at the top.

Pay attention to the connection polarity: red cable "+" / black cable "-"

Supplied with self-adhesive thermal protection to stick on the most suitable side depending on the assemblies.

Stem Length:

• Intake: 166mm
• Exhaust: 189mm

Spacer dimensions:

• Inner diameter: Ø 66mm
• Recess diameter: Ø 76mm
• Outer diameter: Ø 108mm
• Spacer thickness: 16mm
• Sold individually

Designed for use only with springs made from Ø 13.5mm wire