In stock
NEW
Ducellier ignition points
Reference:
4707
- Points set with internal adjusting screw, suitable for distributors with and without vacuum advance
- Brand: Ducellier
- Renault OE Ref: 0854137800 / 608012 / 618701 / 71133 (Ducellier)
€6.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
- Capsule diameter Ø 55mm
- The old-generation 65mm diameter capsules have been replaced by 55mm diameter models. The curve and mounting remain unchanged.
- The operation of the vacuum advance is very important on certain vehicles; it adds 5 to 10°
- DUCELLIER capsule Ref. 60886 for DUCELLIER distributors type: 4128 - 4161 - 4222 - 4224 - 4332 - 4375 - 4394 - 4396 - 4401 - 4436 - 4441 - 4464 - 4491 - 525004 - 525027 - 525028 - 525069 - 525106 - 525109 - 525112 - 525116 - 525117 - 525126 - 525128 - 525133 - 525195 - 525255 - 6610 - 6621.
In stock
In stock
- Mounting diameter of the head on the igniter: Ø 64.5mm
In stock
In stock
Customers who bought this product also bought:
In stock
Cooling hose compatible with Alpine:
- A310.4 1600VE: From #1 to end of series
- A310.4 1600VF: From #1 to end of series
- A110 SC / Si (1600VD) and SX (1600VH)
In stock
Delivery in France only
- Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
- DOT 5 approved (not to be confused with DOT 5.1)
Directions for use:
- Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.
.jpg)
In stock
- Overall Length: 227.5cm
- Sheath Length: 176cm
- Cable Length: 218cm
Suitable for cars with a handbrake under the dashboard:
- A110.1300 VA and VB (From No. 11952 to the end…)
- A110.1300 VC (From No. 11913 to the end…)
- A110.1600 VB (From No. 17005 to the end…) end…)
Our cables are made in France and meet the assembly and quality standards of original equipment (OE) cables from car manufacturers.
In stock
- Inner diameter: Ø 18mm
- Outer diameter: Ø 42mm
- Height: 42mm
In stock
- A M12x175 screw is required to secure the axle to the support.
In stock