In stock
Steering and Front Axle Simca Rallye 2 / Rallye 3
Our spare parts for the steering and front axle of your Simca Rallye 2 / Simca Rallye 3
Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Simca Rallye 2 / Simca Rallye 3
Whether you are looking for, steering rods, rack bellows, flexor, ball joint, bearing for stub axle, wishbone, silentbloc, stabilizer bar, support, lower wishbone reinforcement, wishbone axle, castellated nut, hub cap, stud, direct steering kit, shock absorber, spring...at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your old car back to life with quality components.
Drilling for fixing: x3 holes Ø 8.5mm
Fixing holes offset by 4.5mm for modification of the camber (0° instead of 1°30) and widening the front track (1275mm)
Out of stock
Drilling for fixing: x2 holes Ø 8.5mm and x1 hole Ø 12mm
Camber (0° instead of 1°30), front track (1275mm)
In stock
Not suitable for replacing the original ball joint bellows
In stock
In stock
In stock
In stock
Steering Ball Joint for Adjustable Tie Rods - M12x100 (Left Hand Thread) - All Models (1970 Onwards)
1000/R1/R2/R3/Coupe 1000/1200S/CG
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Suitable for:
Simca 1000: Drum Brake
Simca R1 / R2 / R3: Disc Brake
Simca 1200S (After 1970) / CG: Disc Brake
Bearing Dimensions: Ø 27x50.3x14.2mm and Ø 20x47x15.2mm
Oil Seal Dimensions: Ø 38x52x8mm
In stock
Suitable for:
Dauphine R1094 / R1095 (Disc Brake)
Caravelle / Floride (Disc Brake)
R8G (Disc Brake)
Alpine A108 / GT4 (Disc Brake)
Alpine A110
Simca 1000 / 1000Coupé / 1200S / R1 / R2 / R3 / CG: Front and Rear...
In stock
In stock
Possible adjustment of the hardness of the shock absorbers.
Versatile "Road" shock absorbers, ideal for use on the road and for competition.
In stock
Possible adjustment of the hardness of the shock absorbers.
Versatile "sporty driving" shock absorbers, ideal for road and competition use.
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Metric tap (ISO 6H tolerance): M12x10 (Fine pitch - Right-hand thread)
Tap length (Overall): 70 mm
Mounting drive: 7 mm square
Flat end tap, suitable for: Through holes and blind holes
Machine tap: Only one tap is...
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
In stock
In stock
In stock