Steering wheel covered in high-quality black leather with white stitching and parallel patterns
Steering wheel entirely handmade
Steering wheel outer diameter: Ø 350mm
Dotting: 39mm
Steering wheel cross-section:...
In stock
Performance & Racing Parts Simca Rallye 1
Our performance and Racing spare parts for your Simca Rallye 1
Discover here a wide selection of parts and accessories designed to improve and boost the performance of your Simca Rallye 1
Whether you are looking for electronic ignition, iridium spark plugs, rear tie rods, a sports-prepared camshaft, oil pan, exhaust manifold, sports silencer, steering rod, manual choke, circuit breaker...at AVP, Arnaud Ventoux Pièces, you will find everything you need to optimize the operation of your old one with quality components.
Steering wheel covered in aged black leather for an authentic, vintage look with white stitching and parallel patterns
Steering wheel entirely handmade
Steering wheel outer diameter: Ø 350mm
Thickness: 39mm
Steering...
In stock
Steering wheel covered in high-quality black leather, white stitching with parallel patterns
Steering wheel entirely handmade
Steering wheel outer diameter: Ø350mm
Dotting: 39mm
Steering wheel cross-section: 30mm
Hub...
In stock
Out of stock
Supplied with 4 carburetor mounting studs
Carburetor mounting stud distance: 110mm and 70mm
The carburetor is mounted directly onto the manifold. A seal is ensured by two paper gaskets; there is no need to use...
In stock
Intake ducts: Ø 33mm
Out of stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 125l/h
Max pressure: 0.30bar
Suction: -0.10bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm /...
In stock
In stock
FACET Silver Top 113 l/h Fuel Pump (476087) self-regulating with integrated fuel filter
These pumps reduce the "Vapor Lock" effect by allowing for a more consistent fuel supply.
They must be mounted in a vertical...
In stock
FACET Silver Top 113 l/h Fuel Pump (476087) self-regulating with integrated fuel filter
These pumps reduce the "Vapor Lock" effect by allowing for a more consistent fuel supply.
They must be mounted in a vertical...
In stock
Fitting Specifications:
Inlet Thread Diameter: 1/8 x 27 NPTF
Outlet Diameter: Ø 8mm
Orientation: 90° Elbow
Material: Brass
Sold individually
Suitable for Facet fuel pumps of the following types: Silver Top / Red Top...
In stock
Fitting Specifications:
Inlet Thread Diameter: 1/8 x 27 NPTF
Outlet Diameter: Ø 8mm
Orientation: Right
Material: Brass
Sold individually
Suitable for Facet fuel pumps of the following types: Silver Top / Red Top...
In stock
Fuel filter with 74-micron filtration
Filter diameter: 40mm
Filter height: 35mm
Suitable for Facet fuel pumps of the following types: Silver Top / Red Top and Gold-Flo
In stock
Seal Diameter: Ø 24x51 mm
Seal Thickness: 3 mm
Material: Specific hydrocarbon rubber
Suitable for Facet fuel pumps of the following types: Silver Top / Red Top and Gold-Flo
Seal must be replaced each time the pump...
In stock
This silent block kit is used for mounting Facet pumps and allows the pump to be fixed to the body, preventing vibrations.
Suitable for Facet fuel pumps of the following types: Silver Top / Red Top and Gold-Flo
Kit...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
Not suitable for an igniter...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
Not suitable for an...
In stock
Flexor Specifications:
Mounting hole spacing:4 x 50.50 mm
Mounting hole diameter: Ø 8.4 mm
Center hole diameter:Ø 10.50 mm
Flexor thickness: 11 mm
Material:Rubber flexor with metal reinforcement
Supplied with 4 x...
In stock
In stock
Steering Ball Joint for Adjustable Tie Rods - M12x100 (Left Hand Thread) - All Models (1970 Onwards)
1000/R1/R2/R3/Coupe 1000/1200S/CG
In stock
In stock
In stock
In stock
In stock
Adjustable shock absorber stiffness.
Versatile "Road" shock absorbers, ideal for road use and competition.
Detailed description of Koni shock absorbers, see below
In stock
These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.
With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty...
In stock
Adjustable shock absorber stiffness.
Versatile "Road" shock absorbers, ideal for road use and competition.
Detailed description of Koni shock absorbers, see below
In stock
These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.
With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty...
In stock
Dimensions of the pads: width 55.5mm and height 53mm
Use reserved for competition, do not use these pads on public roads.
In stock
Overall length: 271cm
Sheath length: 87cm
Cable length: 268cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
Overall length: 271 cm
Cable length: 271 cm
CableØ 2 mm
Sold without sheath, compatible with original cable sheaths
Our cables are made in France and meet the assembly and quality standards of original equipment...
In stock
In stock
Vintage round long-range driving light, "Oscar" type (Ø 180mm)
Light unit specifications:
Housing diameter: Ø 181mm
Lens diameter: Ø 145mm
Overall height: 204mm
Depth: 125mm
Mounting base: M12 - Adjustable (Up/Down)...
In stock
