In stock
CG 1200S engine - 1204cm³ engine (type B1200)
Our spare parts for the engine of your Simca CG
Discover here our wide selection of spare parts available to restore or maintain your Simca CG 1200S equipped with a 1204cm³ engine (type B1200).
Whether you are looking for: engine piston, liners, segments, crankshaft bearings, connecting rod bearings, side shims, engine gasket set, base gasket, cover rocker arm, cylinder head gasket, pinion, distribution, timing chain, intake valve, exhaust valve, manifold gasket, crankcase, chain tensioner...At AVP Arnaud Ventoux Pièces, we have everything you need to restore your Simca CG collection with quality components.
Bearing Dimensions:
Dimension: Original (Standard) Dimension
Crankpin Diameter (A): Ø 40.96mm
Housing Diameter (B): Ø 44.00mm
Bearing Width (C): 19.24mm
Bearing Thickness (D): 1.51mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.20)
Crankpin Diameter (A): Ø 40.76mm
Housing Diameter (B): Ø 44.00mm
Bearing Width (C): 19.24mm
Bearing Thickness (D): 1.61mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.50)
Crankpin Diameter (A): Ø 40.46mm
Housing Diameter (B): Ø 44.00mm
Bearing Width (C): 19.24mm
Bearing Thickness (D): 1.76mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Stock dimension (Standard)
Journal Diameter (A): Ø 51.97mm
Housing Diameter (B): Ø 55.88mm
Bearing Width (C): 18.68mm
Bearing Width (C): 24.68mm
Bearing Thickness (D): 1.92mm
Smooth...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.20)
Journal Diameter (A): Ø 51.77mm
Housing Diameter (B): Ø 55.88mm
Bearing Width (C): 18.68mm
Bearing Width (C): 24.68mm
Bearing Thickness (D): 2.02mm
Smooth,...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.20)
Journal Diameter (A): Ø 51.47mm
Housing Diameter (B): Ø 55.88mm
Bearing Width (C): 18.68mm
Bearing Width (C): 24.68mm
Bearing Thickness (D): 2.17mm
Smooth,...
In stock
In stock
In stock
In stock
In stock
Out of stock
Double chain 50 links
Sprocket 36 teeth and 18 teeth
In stock
In stock
In stock
engine 100 R / R1 / R2 / R3 / 1200 S
In stock
In stock
In stock
Thickness: 1.2mm
In stock
In stock
In stock
Intake ducts: Ø 33mm
In stock
Kit of 2 seals for Simca 1000LS / GLS
Need only one of the two seals for Simca 1200S / R2 / R3
In stock
Please note that you also need the AVP9028 seal
In stock
In stock
In stock
In stock
Simca OE Ref: 29932M
Renault OE Ref: 8548620 / 0854862000 / 8548078 / 0854807800
In stock
In stock
Suitable for:
Simca 1000 / 1200S / R1 / R2 / R3 / CG - Ref 22089M
Renault R8 / R8G / Floride / Caravelle
Alpine GT4 / A110 (1100Cm³ / 1300cm³)
Matradjet
These bearings are only suitable for old generation water...
In stock
In stock
In stock
In stock
In stock
Suitable for:
Simca 1000 (All models) / R1 / 1200S
R15 (TS) / R16 (Types L / TL / TS / TX) / R17 5TL / TS) : 1600cm³ engine
In stock
Supplied with 4 carburetor mounting studs
Carburetor mounting stud distance: 110mm and 70mm
The carburetor is mounted directly onto the manifold. A seal is ensured by two paper gaskets; there is no need to use...
In stock
Supplied with x8 mounting studs and x4 O-rings (AVP4806) between the manifold and the carburetor.
Carburetor mounting stud distance: 110mm and 70mm
The carburetors are mounted directly onto the manifold. A...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2.5mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 3mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
