Compatible with :
- R8G R1134 (1108cm³ engine - Type 804) / R1135 (1255cm³ and 1296cm³ engine - Type812)
- Alpine A110 1100G and 1300G/S
In stock
Intake valve (specific) - Ø 35x7x88mm - R8G / A110 (1255 and 1296 engine)
Reference:
4027
- Exhaust valve without shoulder on the keying side to limit smoke caused by oil rising.
- Valve with low keyway
€26.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
Exhaust valve without shoulder on the keying side.
R8G and A110: 1255 and 1296 engine
To be mounted with half moon ref AVP40116
Customers who bought this product also bought:
 - Ø 35x7x88mm - R8G / A110 (1255 and 1296 engine)&media=https://www.arnaudventouxpieces.com/4024-large_default/intake-valve-specific-o-35x7x88mm-r8g-a110-1255-and-1296-engine.jpg){kind=link}
In stock
In stock
In stock
Segment Characteristics:
- Segment Diameter:Ø 74.50mm
- Thickness of Upper Segments (Fire-resistant): 1.75mm
- Thickness of Intermediate Segments (Waterproof): 2mm
- Low ring thickness (Scraper): 4mm
It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.or the values provided in the instruction manual.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
In stock
A steel fret is fitted on the surface of the oil seal for better sealing and reduced wear on the pulley.
- For fitting a belt width: 13mm
In stock
In stock