Aluminum crankshaft pulley - Ø 148mm - Gordini engine (1108cm³ / 1255cm³ and 1296cm³)

• Fuel banjo bolt diameter: M12x100

Suitable for vehicles:

• A110 1600 SX (VD) and SC (VH)
• A310.4: From chassis no. 635 to end of series (2nd model)

Suitable for:

• R8 (688 and 689 Engine) / Caravelle / Floride S
• R4 / R5 / Estafette (Cleon Engine and Billancourt Engine)
• R12 / Estafette (1289cc Engine) / Matradjet
• A110.V85 / GT4

• Bleeder Screw Diameter: Tapered Thread - 1/8" NPTF (+/- 10.29mm)
• Original OE Ref: 6072180 / 0607218000 / 6072471 / 0607247100 / 7703075009

• Kit consisting of 4 large springs, 2 small springs, and 4 retaining clips.
• Kit for Bendix setup or large brake setup (Ø 48mm)
• One kit required per pair of brake calipers.
• Renault / Alpine OE Ref: 0855832300 + 0855832400 + 7701001447

For setups with cast iron caliper brackets, use two identical large springs per caliper.

For stamped steel caliper brackets, use one small spring on the inside and one large spring on the outside.

Suitable for:

• R4
• R8G (Large brake setup)
• Renault 16 
• A110 (Large brake setup)
• A110 (SC / SI / SX)
• A310 4 (All models)
• A310 V6 (Early version - 3-bolt wheels)

• This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts (Length under head 25mm).
• The kit comes with two Ø 3/8"-24UNF banjo bolts (Ø 9.52mm) and two Ø 10x125 banjo bolts.