It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
Alpine A110 braking (Page 2 sur 2)
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
Washer sold individually
One washer allows the centering of a brake disc on the pivot
2 washers are required to equip a front or rear axle.
In stock
Shim sold individually, 2 shims required to equip a front axle.
In addition to the aluminum shim for attaching the front caliper, a caliper yoke is required (not available in the AVP catalog)
WARNING: This assembly...
In stock
Kit includes: 4 screws, 8 washers, and 4 nuts
This kit allows you to install an aluminum shim on the pivot (right or left),
2 kits required per vehicle.
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
In stock
Key length: 51mm
Key width: 23.5mm
In stock
Out of stock
In stock
Suitable for:
R8 / R8G / A110 : Front or rear disc (Big brake assembly)
A110 1600 SX (VH) : Front or rear disc
R16 (L / TL / TS) / R16TX : Front disc
A310.4 (No. 910 at the end of the series): Front disc
A310 V6 -...
Out of stock
Screw for tightening the "Bendix" yoke to its support
Dimensions: 12x125
Reinforced series
Suitable for AVP support REF4377
In stock
ATTENTION: straight, non-offset bracket for mounting a Bendix-type "big brake" caliper bracket
Brake bracket mounting hole spacing: 100mm
Original Alpine part number: 6000001437
Fixing with AVP4300
screws
ATTENTION,...
In stock
Features:
Mounting hub 4 holes - Centering Ø 87mm
Non-ventilated discs
Suitable for:
A110.SC / SI: Rear disc
A310.4 (All models): Rear disc
In stock
Suitable for:
R4 / 4L: Front Brake
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R8: Big Brake Installation: Front Brake
R12 (All models): Front Brake
R15 / R16 / R17 (All models): Front Brake
A110: Big...
In stock
Suitable for:
R8 / A110: Front Big Brakes
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
A310.4: Front Brakes
A310 V6 (Pre-1980): Front Brakes
R12 (All models): Front Brakes
R15 / R16 / R17 (All...
In stock
Suitable for:
R5 / R18 / R21 / R25 / R30 / : Rear Brake
R8: Rear Big Brake Installation
R5 Alpine Turbo (122B): Rear Brake
R12G / R17G: Rear Brake
A110: Rear Big Brake Installation
A310.4: Rear Brake
A310 V6...
In stock
Suitable for:
R8 / A110: Rear Big Brake Assembly
R5 Alpine Turbo (122B): Rear Brake
A310.4: Rear Brake
A310 V6 (Pre-1980): Rear Brake
R12G / R17G: Rear Brake
Brake pads with a retaining stop (B in the diagram) must...
In stock
Suitable for the following vehicles:
R4 / 4L: Front Brakes
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
R8: Big brake installation: Front Brakes
R12 (All models): Front Brakes
R15 / R16 / R17 (All...
In stock
Suitable for the following vehicles:
R5 / R18 / R21 / R25 / R30 / : Rear Brakes
R8: Big Rear Brakes
R5 Alpine Turbo (122B): Rear Brakes
R12G / R17G: Rear Brakes
A110: Big Rear Brakes
A310.4: Rear Brakes
Alpine A310...
In stock
In stock
This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts.
The kit comes...
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Convient pour:
R8 / A110: Frein Arrière (Montage Type gros frein)
A310.4 (Tous modèles) : Frein Arrière
A310.6 (Avant 1980) : Frein Arrière
Out of stock
Suitable for:
R8 / A110 : Rear Brake (Big Brake Type Mounting)
A310.4 (All Models) : Rear Brake
A310 V6 (Before 1980) : Rear Brake
In stock
Suitable for:
R8 / A110: Rear Brake (Big Brake Mounting Type)
A310.4 (All Models): Rear Brake
A310.6 (Before 1980): Rear Brake
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
In stock
Ideal for degreasing all your braking elements or other mechanical parts.
In stock
In stock
In stock
