Complete left rear caliper Ø 38mm - remanufactured (mass cut aluminum)

Brake Disc Specifications:

• Outer Diameter: Ø 260mm
• Inner Centering Diameter: Ø 60mm
• Mounting Hole Spacing: 71mm
• Disc Offset: 33.5mm
• Brake Disc Thickness: 7.5mm (Solid Disc)
• Sold in pairs (2 discs)

Important: Brake discs have a specific mounting direction that must be observed. They are not interchangeable.

Installation direction of a solid, non-ventilated brake disc: The discs must be installed so that the edge of the grooves closest to the outer edge of the disc makes contact with the brake pad first.

For competition use only; do not use these discs on public roads.

Screw dimensions:

• Length under head: 56mm
• Length of smooth body: 40mm
• Diameter of smooth body: Ø 9mm
• Thread diameter: M8

• Sold with water pump gasket
• Distance between two pulley mounting bolts (Center-to-center):50mm
• Pulley mounting using x4 M8 bolts (Not supplied)

The high-flow water pump increases performance Cooling without any modifications. It installs without any modifications, directly in place of the original Renault or Alpine pump.

Suitable for:

• R8 and R8G
• Caravelle and Floride S
• Alpine GT4
• A110 (1300cc engine)
• Matra Djet (1300cc engine)

• The fork is suitable for "original ball thrust bearing" type mounting or for conversion with a guided thrust bearing.
• Mounting instructions provided.

It may be necessary to modify the fork by adding a diameter tube to the fork boss to move the fork/stop assembly forward.

Has 110 1647 cc

• Female connection: Ø 3/8"-24UNF (Ø 9.52mm) x3