In stock
Alpine A110 1100G engine - 1108cm³ engine (Type 804 - Bore Ø 70mm)
Our spare parts for the engine of your Renault Alpine A110
Discover here our wide selection of spare parts available to restore or maintain your Renault Alpine A110 :
- Alpine A110 1100G Engine - 1108cm³ Engine (Type 804 - Bore Ø 70mm)
Whether you are looking for: engine piston, liners, segments, crankshaft bearings, connecting rod bearings, side shims, engine gasket set, base gasket, rocker cover, cylinder head gasket, pinion, distribution, timing chain, intake valve, exhaust valve, manifold gasket, crankcase, chain tensioner...At AVP Arnaud Ventoux Pièces, we have everything you need to restore your classic Alpine A110 Berlinette with quality components.
Sheets (x4)
Sheet Dimensions:
Sheet Bore Diameter: Ø 70mm
Sheet Flange or Top Diameter (D): Ø 85.80mm
Sheet Base Diameter (A): Ø 75.44mm
Sheet Height (including skirts, overall) (C): 135mm
Sheet Height to Base...
In stock
Segment Characteristics:
Segment Diameter:Ø 70mm
Thickness of Upper Segments (Fire-resistant): 1.75mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 3.5mm
It is essential to...
In stock
Thicknesses: White Gasket: 0.06mm Black Gasket: 0.07mm Red Gasket: 0.09mm
Out of stock
Bearing Dimensions:
Dimension: Original (Standard) Dimension
Crankpin Diameter (A): Ø 43.98mm
Housing Diameter (B): Ø 47.62mm
Bearing Width (C): 20.75mm
Bearing Thickness (D): 1.81mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Crankpin Diameter (A): Ø 43.73mm
Housing Diameter (B): Ø 47.62mm
Bearing Width (C): 20.75mm
Bearing Thickness (D): 1.93mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.50)
Crankpin Diameter (A): Ø 43.48mm
Housing Diameter (B): Ø 47.62mm
Bearing Width (C): 20.75mm
Bearing Thickness (D): 2.06mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Stock dimension (Standard)
Journal Diameter (A): Ø 46.00mm
Housing Diameter (B): Ø 49.89mm
Bearing Width (C): 24.50mm (x4)
Bearing Width (C): 19.50mm (x6)
Bearing Thickness (D): 1.92mm...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Junnel Diameter (A): Ø 45.75mm
Housing Diameter (B): Ø 49.89mm
Bearing Width (C): 24.50mm (x4)
Bearing Width (C): 19.50mm (x6)
Bearing Thickness (D): 2.04mm...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.50)
Junnel Diameter (A): Ø 45.50mm
Housing Diameter (B): Ø 49.89mm
Bearing Width (C): 24.50mm (x4)
Bearing Width (C): 19.50mm (x6)
Bearing Thickness (D): 2.16mm...
In stock
Compatible with :
R8G R1134 (1108cm³ engine - Type 804) / R1135 (1255cm³ and 1296cm³ engine - Type812)
Alpine A110 1100G and 1300G/S
In stock
Compatible avec :
R8G R1134 (Moteur 1108cm³ - Type 804) / R1135 (Moteur 1255cm³ et 1296cm³ - Type 812)
Alpine A110 1108cm³ / 1289cm³ (V85) / 1300G / 1300S
R5 Turbo 1 et 2 (1397cm³) / R5 Alpine Turbo / R5 Alpine...
In stock
Compatible with :
R8G R1134 (1108cm³ engine - Type 804) / R1135 (1255cm³ and 1296cm³ engine - Type 812)
Alpine A110 1108cm³ / 1289cm³ (V85) / 1300G / 1300S
R5 Turbo 1 and 2 (1397cm³)
R12.TS (1289cm³)
In stock
Compatible with :
R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
Alpine A110 1100G and 1300G/S
In stock
In stock
Crimp Diameter: Ø 70.9mm
Thickness: 1.45mm (Original dimension)
Material: Multi-layer with steel crimp
In stock
Out of stock
In stock
In stock
In stock
Single chain: x58 links
Crankshaft sprocket x17 teeth and camshaft sprocket x34 teeth
Oil seal: Ø 35x50x8mm
Timing cover gasket: Cork and rubber
In stock
In stock
Automatic spring-loaded tensioner
Features a grease fitting to ensure lubrication and maintain tension of the chain guide against the chain
Renault OE Ref: 084627500 / 7700578993 / 7700719076 / 7701349603
In stock
34-tooth sprocket for single chain timing chain
In stock
Réf OE Renault : 7701349098 / 7700722758
In stock
In stock
In stock
sold with the water pump joint
Réf OE : 7701506944 / 7701457453
In stock
Sold with the water pump gasket
The high-flow water pump allows for increased performance without any modifications. It installs in place of the original Renault or Alpine pump.
In stock
Suitable for:
Simca 1000 / 1200S / R1 / R2 / R3 / CG - Ref 22089M
Renault R8 / R8G / Floride / Caravelle
Alpine GT4 / A110 (1100Cm³ / 1300cm³)
Matradjet
These bearings are only suitable for old generation water...
In stock
Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact
Delivered without seal
In stock
In stock
In stock
In stock
For mounting a belt width: 13mm
In stock
For mounting a belt width: 13mm
In stock
A steel fret is fitted on the surface of the oil seal for better sealing and reduced wear on the pulley.
For fitting a belt width: 13mm
In stock
In stock
Bleeder Screw Diameter: Tapered Thread - 1/8" NPTF (+/- 10.29mm)
Original OE Ref: 6072180 / 0607218000 / 6072471 / 0607247100 / 7703075009
In stock
In stock
Inner Diameter: Ø 220mm
Outer Diameter: Ø 247mm
Thickness: 8mm
Number of Teeth: 117 Teeth
Réf OE Renault / Alpine : 7700520332 / 0555482400 / 5554824
Suitable for vehicles:
R4 / 4L: Type R1128 / R1129 - Engine...
In stock
In stock
In stock
Suitable for 1100/1300 GORDINI
Supplied with M7 stud, washer, and nut
In stock
This lighter is suitable for:
- R8G / A110 (1108cc / 1255cc / 1296cc)
Kit to be used with a primary resistance coil between 2.5 and 3.5 ohms
Compatible with AVP4708 and AVP4715 coils
Out of stock
In stock
In stock
In stock
In stock
In stock
Strainer to be reused from the old oil pump
Suitable for type 688 (1108cc engine) and 689 (956cc engine) engines:
Flordie / Caravelle
R8 (R1130 / R1132 / R1136)
Matradjet (1108cc engine)
Alpine GT4 (1108cc...
In stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF and female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
In stock