In stock
Carburetor & Carburetor Parts A110
Carburetors & Parts for Renault Alpine A110
Discover our selection of carburetors and spare parts specially designed for the Renault Alpine A110. Whether you're looking to restore your vehicle or improve its performance, we offer quality components tailored to your needs.
Our range includes:
- Complete carburetors: Weber 40 DCOE, Weber 45 DCOE, Solex 35 PHH
- Internal parts: main jets, idle jets, needles, floats, accelerator pump pistons
- Adjustment components: mixture screws, springs, accelerator pump rods
- Gaskets and gasket kits for optimal sealing
- Accessories: mounting flanges, aluminum intake manifolds, throttle controls, levers, throttle shafts
- Specific tools: float adjustment tools for Weber DCOE
All our products are selected for their quality and their compatibility with the original Alpine A110 models.
In stock
In stock
In stock
In stock
In stock
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors,
For 23g or 26g brass or plastic float,
Requires 1 piece per carburetor,
Number 72 on the exploded view,
Also suitable for the following carburetors: DCOE, DCO/SP,...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M5X22 screws
Sold individually, requires 9 pieces for one carburetor
Number 5 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M4X16 screw
Sold individually, requires 2 pieces for one carburetor
Number 40 on exploded view
Compatible with other WEBER carburetors, see below
In stock
In some configurations, Weber DCOE carburetors are positioned directly above the exhaust, which can create vapor lock problems due to heat: our AVP48010 plate can solve this problem
Plate can be covered with thermal...
In stock
For M12 banjo bolts
Number 70 on exploded view
In stock
For M12 banjo bolts
Number 98 on exploded view
In stock
M12 Banjo Bolt
Sold individually without gasket
Number 70 on exploded view
In stock
Banjo screw M12
Sold individually without gasket
In stock
Gasket dimensions: Ø 20x12x1mm
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 2 and number 69 on exploded view
Sold individually, 1 piece required for one carburetor
Compatible with other WEBER carburetors,...
In stock
Joint dimensions: Ø 20x16x1mm
In stock
The kit consists of:
"T" fuel connector x1
90° elbow fuel connector x1
Banjo connector screw x2
Banjo screw under head seal x2
Banjo screw lower seal x2
Hose clamp: Size 12-14mm x3
In stock
The kit consists of:
90° elbow fuel connector x1
Banjo connector screw x1
Banjo screw under head gasket x1
Banjo screw lower gasket x1
Hose clamp: Size 12-14mm x1
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE carburettor
Thread16x1.5
Need 1 piece for a carburetor
Number 1 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Requires 1 part per carburetor
Number 3 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Sold individually, 1 cover required per carburetor
Number 4 on exploded view
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Ball joint diameter: Ø 8mm
Mounting pin: M5
Supplied with washer and fixing nut
In stock
Levier de commande d'accélérateur pour UN carburateur WEBER 40DCOE ET 45DCOE
Adaptable sur R8 et Alpine A110 avec pipe pour un carburateur WEBER
Dimension du centre de l'arbre au centre de la rotule: 23,50 mm
Rotule...
In stock
Throttle control lever for TWO WEBER 40DCOE AND WEBER 45DCOE carburetors
Allows carburetor synchronization
Suitable for R8 Gordini, Alpine A110, Simca Rallye
8mm diameter ball joint
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M5x32 screw
Head width 8mm
Number 52 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 83 on exploded view
In stock
Number 36 on the exploded view
In stock
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
External mounting
Fixes to the carburetor cover
In stock
This bracket attaches to the gearbox studs
Renault and Alpine OE part number:0555617900
In stock
R12 TS: Double body carburettor 32 DIR / ref: 7700534929
A110.V85
Out of stock
R12 TS: Double body carburettor 32 DIR / ref: 7700549684
A110.V85
Out of stock
R12 TS: Double body carburettor 32 DIR / ref: 7700577132
A110.V85
In stock
Hose inner diameter: Ø 9mm
Sold individually, May need to be cut to size on some fuel-injected versions
Ref. OE Renault / Alpine: 0857719300 / 7700560885 + 7700529421 / 7700574299
Suitable for:
R16 TX: 1647cc...
In stock
In stock
In stock
In stock
In stock
Need 3 AVP6815 gaskets and 1 AVP6816 gasket to equip one engine
In stock
Need 1 AVP6816 gasket and 3 AVP6815 gaskets to equip an engine
In stock
Out of stock
In stock
Carburetor mounting distance to the intake manifold: 110mm and 70mm
Manifold supplied with O-rings (x2) and studs (x4) for mounting the carburetor
The carburetor is mounted directly onto the manifold. The seal is...
In stock
Intake manifold mounting distance: 70mm and 110mm
Carburetor mounting distance: 110mm and 70mm
Flange thickness: 19.3mm
Pipes diameter: Ø 40mm
Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting...
In stock
In stock
Intake manifold mounting distance: 70mm and 110mm
Carburetor mounting distance: 110mm and 70mm
Flange thickness: 19.3mm
Pipes diameter: Ø 45mm
Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting...
In stock
In stock
Ideal for sealing the nylon or aluminum flanges of Weber 40/45 DCOE carburetors.
Gasket sold separately
In stock
Mounting flange for a Weber carburetor on an intake manifold or intake pipe that does not have O-rings or connecting elements.
Provides a better seal and greater flexibility between the carburetor and the intake...
In stock
Mounting flange for a Weber carburetor on an intake manifold or intake pipe that does not have O-rings or connecting elements.
Provides a better seal and greater flexibility between the carburetor and the intake...
In stock
This aluminum flange is an evolution of nylon flanges, designed to improve reliability and prevent certain deformations related to use and high temperatures.
Mounting flange for a Weber carburetor on an intake...
In stock
This aluminum flange is an evolution of nylon flanges, designed to improve reliability and prevent certain deformations related to use and high temperatures.
Mounting flange for a Weber carburetor on an intake...
In stock
Center distance between carburetor and intake pipe : 110mm and 70mm
Ideal assembly with a pair of aluminium flanges Ref: AVP6810
Out of stock
Center distance between carburetor and intake pipe : 110mm and 70mm
Flanges with tapping for a vacuum
Flanges to be assembled directly on the carburetors, the seal is ensured by O-rings (delivered with 4 O-rings)
Out of stock
Carburetor mounting distance to the intake manifold: 110mm and 70mm
Intake manifold height: 76mm
Manifold supplied with O-rings (x4) and carburetor mounting studs (x8)
The carburetor mounts directly onto the...
In stock
In stock