Tube of brake grease - 25gr

• This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts.
• The kit comes with two Ø 3/8"-24UNF banjo bolts (Ø 9.52mm) and two Ø 10x125 banjo bolts.

• Bandjo fixing screw: Ø3/8" - 24UNF (Ø 9.52mm)

Suitable for:

• Dauphine R1094 / R1095 (Disc Brake)
• Caravelle / Floride (Disc Brake)
• R8G (Disc Brake)
• Alpine A108 / GT4 (Disc Brake)
• Alpine A110
• Simca 1000 / 1000Coupé / 1200S / R1 / R2 / R3 / CG: Front and Rear Axles(Simca OE Ref: 20336S)

• Alpine OE Ref: 6000002145
• Two tubes required per car

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

Inlet and outlet Ø 6-8mm