Aluminum washer for centering front or rear brake discs (For large brake type mounting) - R8 / A110

It is mandatory to change the calipers in pairs (Right and left caliper)

• Fuel pressure gauge kit.
• Allows fuel pressure adjustment with the "King" filter REF 6825.
• Graduation from 0.20g up to 1 bar.
• With connector and clamp for 6 or 8 diameter flexible hoses.
• The pressure gauge can be removed after adjustment and the cap provided in the kit can be screwed on for greater privacy in the engine compartment.

Suitable for:

- Front brake for "Big front brake" type mounting: A110/R8G

- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G

- Front brake: A310.4 (from chassis n°910 to end of series)

- Front brake: R16.TS

• Usable length (L on diagram photo number 3): 14mm

Suitable for:

• • R8 / A110: Front Big Brakes
  • R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
  • A310.4: Front Brakes
  • A310 V6 (Pre-1980): Front Brakes
  • R12 (All models): Front Brakes
  • R15 / R16 / R17 (All models): Front Brakes

Brake pads with a retaining stop (B in the diagram) must be fitted with this stop facing forward (in the direction of wheel rotation).

For competition use only. Do not use these brake pads on the track. public.

• Angled hose outlet: Ø 3/8" - 24UNF(Ø 9.52mm)

Suitable for:

• 4CV: Right Front Brake (Early 1956 to Late)
• Dauphine / Floride : Left Front Brake
• R8 (drum brake): Left Rear Brake