Suitable for:
Florida S (1962-1967): Engine 689-01 and 689-02 (1962-1967)
Caravelle (1962-1967): Engine 689-01 and 689-02 (1962-1967)
R8 (1962-1967): Engine 689-01 and 689-02
Sets are supplied with the following:...
In stock
Florida S engine - 956cc engine (Type 689)
Segment Characteristics:
Segment Diameter:Ø 65mm
Thickness of Upper Segments (Fire-resistant): 1.75mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 3.5mm
It is essential to...
In stock
Segment Characteristics:
Segment Diameter: Ø 65mm
Thickness of Upper Segments (Fire-resistant): 2mm
Thickness of Intermediate Segments (Waterproof): 2mm
Lower piston ring thickness (scraper): 3.5mm
It is...
In stock
Bearing Dimensions:
Dimension: Original (Standard) Dimension
Crankpin Diameter (A): Ø 43.98mm
Housing Diameter (B): Ø 47.62mm
Bearing Width (C): 20.75mm
Bearing Thickness (D): 1.81mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Crankpin Diameter (A): Ø 43.73mm
Housing Diameter (B): Ø 47.62mm
Bearing Width (C): 20.75mm
Bearing Thickness (D): 1.93mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.50)
Crankpin Diameter (A): Ø 43.48mm
Housing Diameter (B): Ø 47.62mm
Bearing Width (C): 20.75mm
Bearing Thickness (D): 2.06mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Stock dimension (Standard)
Journal Diameter (A): Ø 46.00mm
Housing Diameter (B): Ø 49.89mm
Bearing Width (C): 24.50mm (x4)
Bearing Width (C): 19.50mm (x6)
Bearing Thickness (D): 1.92mm...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Junnel Diameter (A): Ø 45.75mm
Housing Diameter (B): Ø 49.89mm
Bearing Width (C): 24.50mm (x4)
Bearing Width (C): 19.50mm (x6)
Bearing Thickness (D): 2.04mm...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.50)
Junnel Diameter (A): Ø 45.50mm
Housing Diameter (B): Ø 49.89mm
Bearing Width (C): 24.50mm (x4)
Bearing Width (C): 19.50mm (x6)
Bearing Thickness (D): 2.16mm...
In stock
In stock
In stock
In stock
In stock
Suitable for:
Floride S and Caravelle (R1131 / R1133): 1108 cc engine (Type 688-01 / 688-02 / 688-03) and 956 cc engine (Type 689-01 / 689-02 / 698-03)
R8 / R8 Majeure (R1130 / R1132): 1108 cc engine (Type 688-01 /...
In stock
Suitable for:
Floride S and Caravelle (R1131 / R1133): 1108 cc engine (Type 688-01 / 688-02 / 688-03) and 956 cc engine (Type 689-01 / 689-02 / 698-03)
R8 / R8 Majeure (R1130 / R1132): 1108 cc engine (Type 688-01 /...
In stock
Suitable for valves with a groove in the lower position (type BK) and for stems with a diameter of 7mm
Out of stock
Head gasket with oblong holes
Suitable for engines:
1108cc engine: Type 688-02 / 688-06 / 688-09 (R8S R1136)
956cc engine: Type 689-01 / 689-03
Out of stock
Thickness 1.35mm
Suitable for:
R8 (956cc) and R8 (1108cc) TS (FASA)
R4 (956cc) F4 Van (FASA)
In stock
Thickness: 1.2mm (Original side)
Oblong “Lunules” type cylinder head gasket
In stock
Thickness: 1.7mm (repair side)
Oblong “Lunules” type cylinder head gasket.
In stock
In stock
Single chain: x58 links
Crankshaft sprocket x17 teeth and camshaft sprocket x34 teeth
Oil seal: Ø 35x50x8mm
Timing cover gasket: Cork and rubber
In stock
In stock
Self-winding spring-loaded tensioner
Features a grease fitting to ensure lubrication and maintain tension on the chain guide.
Renault OE Ref: 084627500 / 7700578993 / 7700719076 / 7701349603
->We prioritize...
In stock
34-tooth sprocket for single chain timing chain
In stock
Réf OE Renault : 7701349098 / 7700722758
In stock
Sold with water pump gasket
Distance between two pulley mounting bolts (Center-to-center distance):50mm
Pulley mounting using x4 M8 bolts (Not supplied)
Renault / Alpine OE Ref: 7701506944 / 7701457453
Suitable...
In stock
Sold with water pump gasket
Distance between two pulley mounting bolts (Center-to-center):50mm
Pulley mounting using x4 M8 bolts (Not supplied)
The high-flow water pump increases performance Cooling without any...
In stock
Suitable for:
Simca 1000 / 1200S / R1 / R2 / R3 / CG - Ref 22089M
Renault R8 / R8G / Floride / Caravelle
Alpine GT4 / A110 (1100Cm³ / 1300cm³)
Matradjet
These bearings are only suitable for old generation water...
In stock
Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact
Delivered without seal
In stock
In stock
Pulley Specifications:
Pulley Outer Diameter: Ø 140mm
For use with a 10mm wide belt
Pulley Mounting Bolt Spacing: 4x50 mm
Mounting Bolt Diameter: Ø 8mm
Water Pump Centering Hole Diameter: Ø 23.70mm
Pulley Mounting...
In stock
In stock
In stock
In stock
Pulley Specifications:
Pulley mounting diameter: Ø 35mm
Pulley outer diameter: Ø 130mm
Builts a 10mm wide belt
Keyway width: 5mm
Pulley fixing bolt offset: 28mm
Belt offset: 20mm
Ref. OE Renault: 0824397802 /...
In stock
Bleeder Screw Diameter: Tapered Thread - 1/8" NPTF (+/- 10.29mm)
Original OE Ref: 6072180 / 0607218000 / 6072471 / 0607247100 / 7703075009
In stock
Cap thread: M16 x 1.5 mm
Magnetic cap with 8 mm square recess
Renault OE part numbers: 7830197000 - 7703075152 - 7903075033
Supplied without gasket.
Copper gasket part number: AVP 1108
In stock
In stock
Inner Diameter: Ø 220mm
Outer Diameter: Ø 247mm
Thickness: 8mm
Number of Teeth: 117 Teeth
Réf OE Renault / Alpine : 7700520332 / 0555482400 / 5554824
Suitable for vehicles:
R4 / 4L: Type R1128 / R1129 - Engine...
In stock
In stock
Cap Dimensions:
Cap Recess Diameter: Ø 32.5mm
Cap Outer Diameter: Ø 65.38mm
Metal Tab Length: 42mm
Metal Tab Width (at widest point): 13.40mm
Metal Tab Width (at narrowest point): 7mm
In stock
In stock
11-tooth pinion
Teeth height: 9.3mm
Overall pinion height: 63.50mm
Suitable for 688, 689, 810, 840, C1C and C1E engines
In stock
11-tooth pinion
Tooth height: 11mm
Overall pinion height: 64mm
In stock
Strainer to be reused from the old oil pump
Suitable for type 688 (1108cc engine) and 689 (956cc engine) engines:
Flordie / Caravelle
R8 (R1130 / R1132 / R1136)
Matradjet (1108cc engine)
Alpine GT4 (1108cc...
In stock
Length: 60mm
Possibility of adaptation on other engines without oil filter
In stock
For tightening the oil filter plate on the engine block
In stock
Rock cover sold with its gasket: Rope gasket Ø 4mm
In stock
In stock
In stock
In stock
In stock
Minimum insertion diameter of the plug (with its gasket) between:Ø 48.5mm and Ø 50mm
Rock cover plugwith vent hole
Plug sold with its sealing gasket (AVP 60119)
In stock
Minimum insertion diameter of the plug (with its gasket) between:Ø 48.5mm and Ø 50mm
Rock cover plugwith vent hole
Plug sold with its sealing gasket (AVP 60119)
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock