Exhaust valve Ø 26.7x7x89.7mm (2 grooves) - 956cm³ and 1108cm³ engine (Type 688 and 689) - Ref 0555542900

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

Suitable for:

• 4CV: Drum brake (From 06/1953 until the end of production)
• Alpine A106: Drum brake
• Dauphine (All models): Disc brake
• Caravelle / Floride: Disc brake
• R10 / R8 (All models): Disc brake
• R12G and R17 Gordini: Disc brake
• Alpine A110 and GT4: Disc brake

Gasket thickness:

• White gaskets: 0.06mm
• Black gaskets: 0.07mm
• Red gaskets: 0.09mm

Suitable for:

• Floride S and Caravelle (R1131 / R1133): 1108 cc engine (Type 688-01 / 688-02 / 688-03) and 956 cc engine (Type 689-01 / 689-02 / 698-03)
• R8 / R8 Majeure (R1130 / R1132): 1108 cc engine (Type 688-01 / 688-02 / 688-03) and 956 cc engine (Type 689-01 / 689-02 / 698-03)
• Estafette (R2132 / R2133 / R2134 / R2135): 1108cc Engine (Type 688-01)

Bearing Dimensions:

• Dimension: Stock dimension (Standard)
• Journal Diameter (A): Ø 46.00mm
• Housing Diameter (B): Ø 49.89mm
• Bearing Width (C): 24.50mm (x4)
• Bearing Width (C): 19.50mm (x6)
• Bearing Thickness (D): 1.92mm
• Smooth, lug-type bearings with grease holes (x5) and grooves (x5)
• Bearing material: Bi-metal

This hose is also suitable for carburetors with a cold-start choke operated by a hot-water-heated thermostatic spring (hose connecting the cold-start heater to the carburetor base).

• Renault OE Ref.: 8575004 / 0857735000 / 7700502438

Suitable for:

• R8 (R1130 / R1132): Solex 32 DISTA / 32 DITA
• R8S (R1136): Weber 32DIR
• Caravelle / Floride S: Solex 32 DISTA / 32 DITA