Aluminum water pump pulley - Ø 140mm - Cléon 1108cc engine - Ref 0833084202

Suitable for:

• • Estafette: Cléon 1108cc engine
  • R4 F6/GTL (Engine 688, C1E): Cléon 1108cc engine
  • R5 TL/GTL and Commercial Vehicles: Cléon 1108cc engine
  • R6 TL: Cléon 1108cc engine
  • R8 Major (R1132) / R8S (R1136): Cléon 1108cc engine
  • R10: Cléon engine 1108 cm³

The sets are supplied with the following components:

• Liners (x4)
• Pistons (x4)
• Rings (x12)
• Pin pins (x4)

Dimensions of the various parts:

• Liner bore diameter: Ø 70 mm
• Flange or top diameter (D): Ø 85.80 mm
• Liner base diameter (A):Ø 75.44mm
• Overall height including skirts of cylinder liners (C): 135mm
• Height from top of cylinder liner to base seal area (E): 94.85mm
• Panel dimensions: Ø 18x62mm (Cirlip-free mounting)
• Ring thickness: 2mm / 2mm / 3.5mm (Fireproof/Sealing/Scraper)
• Base seal type: Paper gasket

Piston mounting direction: one arrow drawn perpendicular to the axis of the piston, figure on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).

It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals.

• Single chain: x58 links
• Crankshaft sprocket x17 teeth and camshaft sprocket x34 teeth
• Oil seal: Ø 35x50x8mm
• Timing cover gasket: Cork and rubber

• • Self-winding spring-loaded tensioner
  • Features a grease fitting to ensure lubrication and maintain tension on the chain guide.
  • Renault OE Ref: 084627500 / 7700578993 / 7700719076 / 7701349603

->We prioritize quality and reliability: tensioner conforms to original equipment quality.

• Sold with 3 fixing screws and the oil seal (Ø 17x30x7mm)
• Guide to be installed when replacing a slip-on clutch with a graphite release bearing with a modern diaphragm clutch
• Drilling and tapping are required in the clutch housing for installation of the adapter guide.
• Installation instructions included with the kit

Bearing Dimensions:

• Dimension: Repair Dimension (+0.25)
• Crankpin Diameter (A): Ø 43.73mm
• Housing Diameter (B): Ø 47.62mm
• Bearing Width (C): 20.75mm
• Bearing Thickness (D): 1.93mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material: Bimetal