Aluminum rocker cover O-ring - Ø 6mm (sold by the meter)

• Special Premium Quality graphite for clutch release bearings
• Important: The release bearing clamping screw must be placed on the side opposite the fork
• Depending on the diameter of the return spring, it may be necessary to re-drill the release bearing mounting.
• It is recommended to soak the release bearing in warm engine oil and then wipe it dry before installation to avoid squeaking noises

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.

• Fitting for flat wiper arm width 6mm

Fan trigger temperature 82°C

Fan stop temperature 72°C

• Pressure: 0 - 6 bar
• Release pressure: 0.60 bar
• Thread: M14x150
• To be mounted with ref AVP5091 for R5 Alpine engine (R1223)