In stock
Steering and Front Axle Alpine A110 (Page 2 sur 2)
Screw M8x125
Total length under head: 20.5mm
In stock
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
Suitable for:
- R8.G (R1134 / R1135) from 10/1964 to 1974
- Alpine A110: 1100cc / 1300cc / 1600cc / SC and SX (with Alpine A310 rear axle)
- Alpine GT4 / Matradjet
Comfort shock absorbers with road setting.
In stock
Suitable for:
- R8.G (R1134 / R1135) from 10/1964 to 1974
- Alpine A110: 1100cc / 1300cc / 1600cc / SC and SX (with Alpine A310 rear axle)
- Alpine GT4 / Matradjet
Versatile shock absorbers with road and rally...
In stock
Suitable for:
R8.G (R1134 / R1135) from 10/1964 to 1974
Alpine A110 (All models): 1100cc / 1300cc / 1600cc / SC and SX (With Alpine A310 rear axle)
Alpine GT4 / Matradjet
Shock absorber stiffness adjustment...
In stock
Designed to be mounted only with the original springs (wire Ø 12.5mm).
Sold individually.
In stock
Designed to be used only with original springs (12.5mm wire diameter).
Sold individually.
In stock
In stock
In stock
Lever that connects the primary handbrake cable to the secondary handbrake cable.
Three possible positions for attaching the primary handbrake cable (Spanish & French models)
Alpine OE Ref: 6000000010 / 6000001680
In stock
In stock
A M12x175 screw is required to secure the axle to the support.
In stock
To be installed with a straight grease nipple M6x100 (AVP C107)
Specific screw: M12x150 (Fine Pitch)
OE Renault Ref: 8546170 / 0854617000
In stock
In stock
In stock
In stock
In stock
This rudder is an improved version of the original rudder.
The ball joints help make the pedals' movements smoother and freer.
Out of stock
Tie rod adjustment range: 9.5cm to 11.5cm
The tie rod can be cut to size to make it shorter
In stock
In stock
In stock
Useful length (L on photo diagram number 3): 12.5mm
Sold with the pin
OE Renault / Alpine Ref: 0705339100
In stock
Useful length (L on photo diagram number 3): 17mm
Sold with the pin
OE Renault / Alpine Ref: 0705837200
In stock
Useful length (L on photo diagram number 3): 19.5mm
Sold with the pin
OE Renault / Alpine Ref: 0705322000
In stock
Axle Dimensions:
Axle Inner Diameter: Ø 6mm
Diameter of Two Round Axles: Ø 6mm
Width: 22mm
Out of stock
In stock
Out of stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Metric tap (ISO 6H tolerance): M12x10 (Fine pitch - Right-hand thread)
Tap length (Overall): 70 mm
Mounting drive: 7 mm square
Flat end tap, suitable for: Through holes and blind holes
Machine tap: Only one tap is...
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
In stock
In stock
In stock