In stock
Copper grease (10ml syringe)
Reference:
C130
-
- Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
- Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems, clutches…
- Non-conductive and insoluble in water, copper grease ensures good contact, prevents the formation of rust oxides, and is particularly resistant to high temperatures and high pressures.
- Minimum operating temperature: -20°C
- Maximum operating temperature: 1200°C
- Packaging: 10ml syringe
.jpg)
€9.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
Ideal for degreasing all your brake components or other mechanical parts.
Image for illustrative purposes only.
May vary depending on availability.
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
TRW paste is used for the repair, assembly, and preservation of hydraulic brake components—such as brake calipers—that require special greases for reassembly.
Compatible with all brake fluids for the installation of seals and any components in contact with brake fluid, such as master cylinders and wheel cylinders.
- Tube size: 25g
In stock
Customers who bought this product also bought:
- Delivery in France only
- Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
- Resistant to 180°C
- Capacity: 500ml
- Color: RAL 9006 Aluminum Gray
- Applicable directly with a brush or spray gun by diluting the paint with thinner reference C024.
In stock
In stock
&media=https://www.arnaudventouxpieces.com/11339-large_default/graisse-au-cuivre-seringue-de-10ml.jpg){kind=link}
Segment Characteristics:
-
- Segment Diameter:Ø 88mm
- Thickness of Upper Segments (Fire-resistant): 1.5mm
- Thickness of Intermediate Segments (Waterproof): 2mm
- Low ring thickness (Scraper): 4mm
It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values given by the manufacturer or in the instructions provided.or the values given in the instruction manual.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
In stock
In stock
In stock
In stock
In stock