 for mounting with grease nipple (Not supplied) - R8 / Caravelle / A110&media=https://www.arnaudventouxpieces.com/10479-large_default/vis-de-fixation-d-axe-de-pedalier-cote-passage-pour-montage-avec-graisseur-non-fourni-r8-caravelle-a110.jpg){kind=link}
- Grease nipple with steel ball
- Grease nipple (overall) height: 15.20 mm
- Grease nipple with a 7 key recess
In stock
Bottom bracket axle fixing screw (passage side) for mounting with grease nipple (Not supplied) - R8 / Caravelle / A110
Reference:
43010
- To be installed with a straight grease nipple M6x100 (AVP C107)
- Specific screw: M12x150 (Fine Pitch)
- OE Renault Ref: 8546170 / 0854617000
€4.50
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
In stock
In stock
In stock
- A M12x175 screw is required to secure the axle to the support.
In stock
Customers who bought this product also bought:
In stock
In stock
In stock
Compatible with :
- R8G R1134 (1108cm³ engine - Type 804) / R1135 (1255cm³ and 1296cm³ engine - Type 812)
- Alpine A110 1108cm³ / 1289cm³ (V85) / 1300G / 1300S
- R5 Turbo 1 and 2 (1397cm³)
- R12.TS (1289cm³)
In stock
In stock
Flexor Specifications:
-
- Mounting hole spacing:4 x 50.50 mm
- Mounting hole diameter: Ø 8.4 mm
- Center hole diameter:Ø 10.50 mm
- Flexor thickness: 11 mm
- Material:Rubber flexor with metal reinforcement
- Supplied with 4 x M8 x 20 mm screws and 4 x nylock nuts
For some assemblies with a center screw, replacing this screw with a socket head cap screw (SHCS) or modifying the flexor may be necessary.
In stock
The kit contains:
- 4 x 8mm smooth-bore screws - M8 thread (to be positioned on the wheel side)
- 4 x 8.4mm smooth-bore screws - M8 thread (to be positioned on the body or chassis side)
Alpine / Renault OE Ref: 0706289800 / 0706290200
A kit is required to equip both front wishbones of a car
In stock
- Metal band hose clamp with pin lock
- Metal band width: 9 mm
- Clamp length: 500 mm
- Maximum diameter: Ø 150 mm
In stock