Braking Alpine A310.4
Our braking spare parts for the Alpine A310.4
Discover here a wide range of parts to restore and ensure the proper functioning of the braking system of your Alpine A310.4
Whether you are looking for wheel cylinders, hoses, master cylinder, brake disc, pad, brake caliper kit, big brake caliper, lockheed, reservoir, connector, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Parts, you will find everything you need to bring your old car back to life with quality components.
In stock
Suitable for:
A310.4: Front disc for n°1 to n°909
A310.6: Front disc for n°1 to n°47708 (before 1980)
R5 Alpine Turbo (122B) / Alpine Coupe: Front disc
R12G / R17G: Front disc
In stock
Suitable for:
R8 / R8G / A110 : Front or rear disc (Big brake assembly)
A110 1600 SX (VH) : Front or rear disc
R16 (L / TL / TS) / R16TX : Front disc
A310.4 (No. 910 at the end of the series): Front disc
A310 V6 -...
In stock
Features:
Mounting hub 4 holes - Centering Ø 87mm
Non-ventilated discs
Suitable for:
A110.SC / SI: Rear disc
A310.4 (All models): Rear disc
In stock
Suitable for:
R4 / 4L: Front Brake
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R8: Big Brake Installation: Front Brake
R12 (All models): Front Brake
R15 / R16 / R17 (All models): Front Brake
A110: Big...
In stock
Suitable for:
R8 / A110: Front Big Brakes
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
A310.4: Front Brakes
A310 V6 (Pre-1980): Front Brakes
R12 (All models): Front Brakes
R15 / R16 / R17 (All...
In stock
Suitable for:
R5 / R18 / R21 / R25 / R30 / : Rear Brake
R8: Rear Big Brake Installation
R5 Alpine Turbo (122B): Rear Brake
R12G / R17G: Rear Brake
A110: Rear Big Brake Installation
A310.4: Rear Brake
A310 V6...
In stock
Suitable for:
R8 / A110: Rear Big Brake Assembly
R5 Alpine Turbo (122B): Rear Brake
A310.4: Rear Brake
A310 V6 (Pre-1980): Rear Brake
R12G / R17G: Rear Brake
Brake pads with a retaining stop (B in the diagram) must...
In stock
Suitable for the following vehicles:
R5 / R18 / R21 / R25 / R30 / : Rear Brakes
R8: Big Rear Brakes
R5 Alpine Turbo (122B): Rear Brakes
R12G / R17G: Rear Brakes
A110: Big Rear Brakes
A310.4: Rear Brakes
Alpine A310...
In stock
Key Length: 56mm
Key Width: 23.5mm
Suitable for:
R5 Alpine (Coupe and Group 2): Front Brakes
R12G / R17G: Front Brakes
A310.4: Front and Rear Brakes
A310 V6 Before 1980 (#1 to #47708): Front and Rear Brakes
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Convient pour:
R8 / A110: Frein Arrière (Montage Type gros frein)
A310.4 (Tous modèles) : Frein Arrière
A310.6 (Avant 1980) : Frein Arrière
In stock
Suitable for:
R8 / A110 : Rear Brake (Big Brake Type Mounting)
A310.4 (All Models) : Rear Brake
A310 V6 (Before 1980) : Rear Brake
In stock
Suitable for:
R8 / A110: Rear Brake (Big Brake Mounting Type)
A310.4 (All Models): Rear Brake
A310.6 (Before 1980): Rear Brake
In stock
Suitable for the following models:
- R5 Alpine Coupe
- R12G
- R15.TS / R16.TX
- R17.TL / TS / Gordini
Out of stock
Suitable for:
R5 Alpine Coupe / GR2 : Front Brake
R12G / R17G : Front Brake
R15.TS / R17TS / R17TL : Front Brake
R16.TX (1st assembly) : Front Brake
A310.4 (n°1 to n°909) : Front Brake
In stock
In stock
In stock
In stock
In stock
Out of stock
In stock
In stock
In stock
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
Ideal for degreasing all your braking elements or other mechanical parts.
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock