Bendix caliper repair kit - Ø 54mm - R5 alpine Coupe / R12.G / R15 / R16 / R17.G

Suitable for:

• R5 Alpine Coupe / GR2 : Front Brake
• R12G / R17G : Front Brake
• R15.TS / R17TS / R17TL : Front Brake
• R16.TX (1st assembly) : Front Brake
• A310.4 (n°1 to n°909) : Front Brake

Convient pour:

• R8 / A110: Frein Arrière (Montage Type gros frein)
• A310.4 (Tous modèles) : Frein Arrière
• A310.6 (Avant 1980) : Frein Arrière

TRW paste is used for the repair, assembly, and preservation of hydraulic brake components—such as brake calipers—that require special greases for reassembly.

Compatible with all brake fluids for the installation of seals and any components in contact with brake fluid, such as master cylinders and wheel cylinders.

• Tube size: 25g

Ideal for prepared engines or to replace a mechanical fuel pump.

• Flow rate: 125l/h
• Max pressure: 0.30bar
• Suction: -0.10bar
• 220° adjustable inlet and outlet tube: Ø 8mm
• Self-regulated fuel pump
• Dimensions: 73x126mm / Weight: 820g

Ideal for vehicles with the engine in the rear position with a tank at the front, pump to be positioned close to the tank.

It It is recommended to mount the pump horizontally, with the "Out" outlet at the top.

Pay attention to the connection polarity: red cable "+" / black cable "-"

• This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts (Length under head 25mm).
• The kit comes with two Ø 3/8"-24UNF banjo bolts (Ø 9.52mm) and two Ø 10x125 banjo bolts.

Suitable for:

• R8 / A110 : Rear Brake (Big Brake Type Mounting)
• A310.4 (All Models) : Rear Brake
• A310 V6 (Before 1980) : Rear Brake