In stock
Clutch, Gearbox and Transmission Alpine A310.4
Our spare parts for the clutch and gearbox of your Alpine A310.4
Discover here a wide choice of spare parts to restore or maintain the clutch and gearbox of your Alpine A310.4
Whether you are looking for a clutch disc, an ice mechanism, a clutch release bearing, gearbox seals, bearings, synchro, housing, oil seal, transmitter, receiver, aviation hose...At AVP Arnaud Ventoux Pièces, we have everything you need to restore your Alpine A310.4 collection with quality components.
In stock
In stock
In stock
In stock
In stock
Mounting center distance: 60mm
Fuel banjo bolt diameter: M12x100
Suitable for vehicles:
A110 1600 SX (VD) and SC (VH)
A310.4: All models
Out of stock
Fuel banjo bolt diameter: Ø 7/16x20UNF (+/- Ø 11mm)
Suitable for:
A310.4: From chassis #1 to #634 (1st model)
In stock
Fuel banjo bolt diameter: M12x100
Suitable for vehicles:
A110 1600 SX (VD) and SC (VH)
A310.4: From chassis no. 635 to end of series (2nd model)
In stock
In stock
Renault OE ref: 7700703164
OE Simca Ref: 22502Q
In stock
Ref Renault: 7903053215 / 6000002007
Ref Simca: 23168Z
In stock
Renault ref: 7866038000 / 6000002006
Ref Simca: 23408T
In stock
Length under head: 25.5mm
Overall length: 30.5mm
Suitable for vehicles:
A110 1600 SX (VD) and SC (VH)
A310.4: From chassis no. 635 to the end of the series (2nd model)
In stock
Length under head: 25mm
Overall length: 30mm
Suitable for:
A310.4: From chassis no. 1 to no. 634 (1st model)
In stock
Réf OE Renault: 6000002011
Réf OE Simca: 34816E
In stock
Supplied with 2 banjo bolts: M12x100 and 4 copper gaskets.
Compatible with the following vehicles:
A310.4: From chassis no. 635 to end of series (With 2nd assembly clutch slave cylinder)
A310 V6: All models
In stock
Suitable for gearboxes:
352 gearbox
365 gearboxes except models 365-05 / 365-06 / 365-10 (#1 to #297)
Original OE Ref: 7700502803 / 7700547433
In stock
In stock
Gearbox bell housing paper gasket - Gearbox 336 / 352 / 364 / 365 / 385 / 395 / NG5 - Ref 0428724300
Suitable for:
Box 336
Box 352
Box 364-05 / 364-06
Box 365-00 / 365-02 / 365-05
Box 365-10 / 365-14 / 365-20 / 365-24 / 365-28 / 365-29
Box 395
Box 385 / NG5
In stock
Suitable for:
Box 352
Box 365-00 / 365-02 / 365-05
Box 365-10 / 365-14 / 365-20 / 365-24 /365-28 / 365-29 - 365-33
Box 395
In stock
Synchro Characteristics:
Outer cone with angle (A):6°40'
The outer friction faces or sectors (x15) are different: x3 small and x2 large
Synchro with a lug on the face opposite the main lugs of the synchro (See...
In stock
Synchro Features:
Outer cone with angle (A):9°
All outer friction faces or sectors (x15) are identical and equidistant.
Synchro with a lug on the face opposite the main synchro lugs (See diagram)
Renault OE Ref:...
In stock
Synchro Characteristics:
Outer cone with angle (A):6°40'
The outer friction faces or sectors (x15) are different: x3 small and x2 large
Synchro is smooth on the face opposite the synchro lug (See diagram)
Renault...
In stock
Synchro Characteristics:
Outer cone with angle (A):9°
All outer friction surfaces or sectors (x15) are identical and equidistant.
Synchro smooth on the face opposite the synchro lug (See diagram)
Renault OE Ref:...
Out of stock
Suitable for the following gearboxes:
- Box 365-05 (5th)
- Box 365-00 / 365-02 / 365-10 / 365- 14
Out of stock
Suitable for the following gearbox:
- Gearbox 365-05 / 365-10 / 365-14 / 365-20 / 365-24 / 365-33
In stock
Suitable for the following gearboxes:
Box 330 (3rd)
Box 352-10 / 352-11 / 352-13 / 352-30 / 352-31 / 352-33 (3rd, 4th)
Box 353 (3rd, 4th, 5th)
Box 364-05 / 364-06 (3rd, 4th, 5th)
Box 365-10 / 365- 14 / 365-20 /...
In stock
Pinion with 6 external propellers
For box 365.10 / 365.14 / 365.20 / 365.24 / 365.29
In stock
Brass scabbard that replaces the original plastic one.
In stock
In stock
OE Ref Renault: 7700551449 / 7703087023 / 7703087074 / 7703087117
In stock
In stock
In stock
Suitable for the following gearboxes:
R12 / R12G / R17 / R17G : Gearbox 352 / 365-02 / 365-05 / 365-20
A110 / A310.4 : Gearbox 365-02 / 365-05 / 365-20
R4 / 4L : Gearbox 334-10 / 334-11
In stock
Suitable for the following gearboxes:
5-speed gearbox A110 / A310.4: Gearbox 365-00 / 365-02 / 365-05 / 365-10 / 365-20 / 365-33
Gearbox R12 / R12G / R15 / R17 / R17G: Gearbox 352 / 365 / 395
5-speed gearbox R5...
In stock
Suitable for the following gearboxes:
5-speed gearbox A110 / A310.4: Gearbox 365-00 / 365-02 / 365-05 / 365-10 / 365-20 / 365-33
Gearbox R12 / R12G / R15 / R17 / R17G: Gearbox 352 / 365 / 395
5-speed gearbox R5...
Out of stock
Differential output shaft seals Ø 36x54x11mm are interchangeable, whether they have a metal cage or not, and with or without felt; this does not require any modification to the differential nuts.
Original Renault...
Out of stock
Out of stock
In stock
OE Renault Ref: 0852775600 / 0852957000 / 7703090181
In stock
OE Renault Ref: 7703090187 / 0857568100 / 7703090277
In stock
Suitable for the following gearboxes:
- Box 353
- Box 364-05 / 364-06
- Box 365-00 / 365-02 / 365-10 / 365- 14 / 365-20 / 365-24 / 365-28 / 365-29 / 365-33
- Box 385
In stock
Cap thread:Tapered thread - BSP 3/8x16 (+/- 16.66mm / 1.33 pitch)
Square head cap that can be tightened or loosened with a 17mm wrench.
Renault OE part number:0702980300 / 7703075012
Out of stock
Out of stock
Out of stock
In stock
In stock
Out of stock
In stock
In stock
Out of stock
Bowl diameter on the gearbox side: Ø 76mm
Shaft diameter: Ø 20mm
Bowl length: 90mm
In stock
In stock
Wheel-side bowl diameter: Ø 82mm
Drive shaft diameter: Ø 25mm
In stock
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
Out of stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
Out of stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
Out of stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock