Lockheed brake rubber hose Ø 7.5mm (Sold by the meter)

Filter Dimensions:

• Inner Diameter (D2): Ø 86mm
• Outer Diameter (D1): Ø 128mm
• Height (H1): 175mm
• Height (H2): 164mm

The dimensions given are for guidance only; slight variations of a few millimeters are possible depending on availability.

• 4 spark plug wires + 1 coil wire
• Terminals on coil straight
• Length of coil cable: 61cm
• Length of 2 spark plug cables: 26.5cm
• Length of 2 spark plug cables: 36.5cm
• We would like to point out that our spark plug wires are made with 7mm diameter, black silicone wires with a standard copper core (wire material), which means they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur. happen.

Kit contents:

• Gearbox mounting studs (x4): M10x50mm
• Crossmember mounting bolts (x8): M8x40mm
• Aluminum spacers for gearbox bracket (x2): Thickness 12mm / Hole spacing 65mm
• Aluminum spacers for crossmember (x4): Thickness 12mm / Hole spacing 40mm

Delivery in France only

• Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
• DOT 5 approved (not to be confused with DOT 5.1)

Directions for use:

• Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.

• Distributor cap x8 wires: x6 spark plug wires and x2 coil wires

Bearing Dimensions:

• Dimension: Original (Standard) Dimension
• Crankpin Diameter (A): Ø 43.98mm
• Housing Diameter (B): Ø 47.62mm
• Bearing Width (C): 20.75mm
• Bearing Thickness (D): 1.81mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material: Bimetal