One-piece oil sump gasket - Cléon engine (Large bearing)

Compatible for any Ducellier igniter with an inside diameter of the body of 58.8mm

Brake Disc Specifications:

• Outer Diameter: Ø 228mm
• Inner Centering Diameter: Ø 83mm
• Mounting Hole Spacing: 49.5mm
• Mounting with 6 Bolts: M8x125
• Disc Offset: 28.5mm
• Brake Disc Thickness: 10mm (Solid Discs)
• Sold in pairs (2 discs)

Important Brake discs have a specific mounting direction that must be respected; They are not interchangeable.

Mounting direction of a solid, non-ventilated brake disc : Discs must be installed so that the edge of the grooves closest to the outer edge of the disc makes contact with the brake pad first.

For competition use only; do not use these discs on public roads.

Suitable for:

• R4 Saloon / Van F4 and F6 / Rodeo : Front disc
• R5 Alpine (1223): Disc front
• R5 Alpine Turbo (122B) / Alpine Coupe / GR2: Rear disc
• R12 / R15TL: Front disc
• R12G / R17G / R17TS: Rear disc

• Cooling fan: Pusher or Puller
• Universal Spal connector (requires modification depending on specific vehicle wiring)
• Observe correct wiring polarity for fan rotation:
• Fan in puller mode: Red (+ Battery) / Black (- / Ground)
• Fan in pusher mode: Red (- / Ground) / Black (+ Battery)
• Fan supplied as a standalone unit; mounting or fixing kit not included.
• See fan dimensions in photo #2

Suitable for:

• R8 / A110: Front Brake (Big Brake Assembly)
• R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
• R12 (All models) / R15TL: Front Brake
• R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake
• A310.4 (n°910 at the end of the series): Front Brake
• A310 V6 (Before 1980): Front Brake