Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact
Delivered without seal
In stock
Alpine A110 1300S engine - 1296cm³ engine (Type 812 - Bore Ø75.7mm) (Page 2 sur 3)
In stock
For mounting a belt width: 13mm
In stock
For mounting a belt width: 13mm
In stock
A steel fret is fitted on the surface of the oil seal for better sealing and reduced wear on the pulley.
For fitting a belt width: 13mm
In stock
In stock
In stock
In stock
Suitable for 1100/1300 GORDINI
Supplied with M7 stud, washer, and nut
In stock
This lighter is suitable for:
- R8G / A110 (1108cc / 1255cc / 1296cc)
Kit to be used with a primary resistance coil between 2.5 and 3.5 ohms
Compatible with AVP4708 and AVP4715 coils
Out of stock
In stock
Please note: This oil pump is not suitable as a replacement for an original oil pump in an original sheet metal oil pan for 1255cc and 1296cc engines.
Height from the oil pump mating surface to the bottom of the...
In stock
In stock
In stock
In stock
Oil pan depth: distance from the gasket surface to the bottom of the pan 147mm
Sold with gasket and drain plug (x3).
In stock
Oil pan depth: distance from the gasket surface to the bottom of the pan 147mm
Sold with 3 gaskets and 3 drain plugs
In stock
Also suitable for replacing the M18x150 probe on the AVP4204 water pump bracket
In stock
Pressure: 0 - 6 bar
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (R1223)
In stock
Length: 60mm
Possibility of adaptation on other engines without oil filter
In stock
For tightening the oil filter plate on the engine block
In stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF and female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
In stock
In stock
In stock
In stock
Supplied with self-adhesive thermal protection to stick on the most suitable side depending on the assemblies.
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2.5mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 3mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
In stock
Metric tap (ISO 6H tolerance): M6x100 (Right-hand thread)
Tap length (Overall): 66 mm
Mounting recess: 5 mm square
Pointed point tap, suitable for: Through holes
Machine tap: Only one tap is needed to create a...
In stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
Piston diameter: Ø 53 mm (Minimum) to Ø 125 mm (Maximum)
Tool height: 75 mm
Supplied with a square tightening wrench
Ideal tool for installing pistons in the cylinder block
Out of stock
Bore diameter: Ø 55mm (Minimum) to Ø 170mm (Maximum)
Stone dimensions: 77mm
Interchangeable honing stone
Self-adjusting and tightening sanding arm with flexible drive for pneumatic or electric drills
For honing,...
In stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
Out of stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
In stock
In stock
In stock
Delivery in France only
Epoxy coating for the interior of the engine block.
0.5 kg of resin and hardener + 0.5 l of thinner
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9006 Aluminum Gray
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9005 BLACK
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 6005 green
Applicable directly with a brush or spray gun by diluting...
In stock