×

Expandable reamer/hone for 3-stone cylinders

Reference:
T020
  • Bore diameter: Ø 55mm (Minimum) to Ø 170mm (Maximum)
  • Stone dimensions: 100mm
  • Interchangeable honing stone
  • Self-adjusting and tightening sanding arm with flexible drive for pneumatic or electric drills
  • For honing, sanding, and cleaning cylinders, tubes, bores, etc.
Read moreShow less
€52.00 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Product Details
T020
You may also like
  • Piston diameter: Ø 53 mm (Minimum) to Ø 125 mm (Maximum)
  • Tool height: 75 mm
  • Supplied with a square tightening wrench
  • Ideal tool for installing pistons in the cylinder block
Reference: T019
€14.00 (tax incl.)
Add to cart
In stock
Customers who bought this product also bought:

Segment Characteristics:

    • Segment Diameter:Ø 88mm
    • Thickness of Upper Segments (Fire-resistant): 1.5mm
    • Thickness of Intermediate Segments (Waterproof): 2mm
    • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the instructions provided.or the values ​​given in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.

Reference: 7051
€186.00 (tax incl.)
Add to cart
In stock
  • 4 spark plug wires + 1 coil wire
  • 90° angled coil terminals
  • Length of coil cable: 61cm
  • Length of 2 spark plug wires: 26.5cm
  • Length of 2 spark plug wires: 36.5cm
  • We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), which means they are not protected against interference.
  • If the vehicle is equipped with electronic accessories If you have sensitive equipment, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur.
Reference: 6739
€86.00 (tax incl.)
View more
Out of stock
1