A110 Braking (1100 / 1300 / 1600) - "Big Brake" Assembly
Come with x3 aviation brake hoses to replace copper pipes
In stock
Master Cylinder Specifications:
Piston Diameter: Ø 22.2mm
Number of Outlets / Threads: x2 / M10x100
Number of Outlets / Threads: x2 / M12x100
Mounting Center Distance: 60mm
Master Cylinder Sold Individually
In stock
Length taken from the axis of the fixing eye to the end of the rod: min adjustment 105mm / max 115mm
In stock
Fitting: Ø 7/16" - 20UNF (Ø 11.11mm x 125)
For original master cylinders Ø 19mm, Ø 22mm and Kangoo mounting
In stock
Nut Dimensions:
Nut Thread: 1/2"-20UNF (+/- 12.5mm)
Inner Diameter: 6.50mm
In stock
Thread (master cylinder side): M16x150
Nozzle (rubber hose connection side): Ø 10mm
In stock
- Sold complete with support, brass cap, insert and rubber teat
- Jar mounted with rubber teat Ø 6mm
In stock
Sold complete with teat (inside Ø 6mm), insert, support and cap.
In stock
In stock
In stock
Sold in 1ml lengths
In stock
In stock
Length 1 meter
In stock
The entire kit is made up of 3/8" -24UNF fittings
This kit is made up of the following copper pipes:
- from the brake master cylinder to the Front Right wheel
- from the brake master cylinder to the Front Left wheel
-...
In stock
In stock
Brake hose made of nickel-plated copper:
More corrosion-resistant than copper alone.
Increased lifespan thanks to the nickel plating.
In stock
Double-walled steel brake line coated with a PVF coating:
Tube made of steel coated with a polyfluoroethylene coating for high resistance to rust and corrosion.
Hose used as original equipment by many automotive...
In stock
Thread diameter: Ø 3/8" - 24UNF (+/- 9.52mm)
Nut inner diameter: Ø 5.10mm
Overall length: 19mm
Length under head: 14mm
Cone: Concave / Female
Renault / Alpine OE part number: 6035324 / 0603532400 / 7700523490
Out of stock
In stock
Washer sold individually
One washer allows the centering of a brake disc on the pivot
2 washers are required to equip a front or rear axle.
In stock
Shim sold individually, 2 shims required to equip a front axle.
In addition to the aluminum shim for attaching the front caliper, a caliper yoke is required (not available in the AVP catalog)
WARNING: This assembly...
In stock
Kit includes: 4 screws, 8 washers, and 4 nuts
This kit allows you to install an aluminum shim on the pivot (right or left),
2 kits required per vehicle.
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
In stock
Key length: 51mm
Key width: 23.5mm
In stock
Kit consisting of 4 large springs, 2 small springs, and 4 retaining clips.
Kit for Bendix setup or large brake setup (Ø 48mm)
One kit required per pair of brake calipers.
Renault / Alpine OE Ref: 0855832300 +...
In stock
In stock
Suitable for:
R8 / R8G / A110 : Front or rear disc (Big brake assembly)
A110 1600 SX (VH) : Front or rear disc
R16 (L / TL / TS) / R16TX : Front disc
A310.4 (No. 910 at the end of the series): Front disc
A310 V6 -...
In stock
Bendix clevis bolt for tightening to its caliper bracket.
Size: M12x125
Reinforced series
Suitable for bracket reference: AVP4377
In stock
ATTENTION: straight, non-offset bracket for mounting a Bendix-type "big brake" caliper bracket
Brake bracket mounting hole spacing: 100mm
Original Alpine part number: 6000001437
Fixing with AVP4300 screws...
In stock
Features:
Mounting hub 4 holes - Centering Ø 87mm
Non-ventilated discs
Suitable for:
A110.SC / SI: Rear disc
A310.4 (All models): Rear disc
In stock
Suitable for:
R4 / 4L: Front Brake
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R8: Big Brake Installation: Front Brake
R12 (All models): Front Brake
R15 / R16 / R17 (All models): Front Brake
A110: Big...
In stock
Suitable for:
R8 / A110: Front Big Brakes
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
A310.4: Front Brakes
A310 V6 (Pre-1980): Front Brakes
R12 (All models): Front Brakes
R15 / R16 / R17 (All...
In stock
Suitable for:
R5 / R18 / R21 / R25 / R30 / : Rear Brake
R8: Rear Big Brake Installation
R5 Alpine Turbo (122B): Rear Brake
R12G / R17G: Rear Brake
A110: Rear Big Brake Installation
A310.4: Rear Brake
A310 V6...
In stock
Suitable for:
R8 / A110: Rear Big Brake Assembly
R5 Alpine Turbo (122B): Rear Brake
A310.4: Rear Brake
A310 V6 (Pre-1980): Rear Brake
R12G / R17G: Rear Brake
Brake pads with a retaining stop (B in the diagram) must...
In stock
Suitable for the following vehicles:
R5 / R18 / R21 / R25 / R30 / : Rear Brakes
R8: Big Rear Brakes
R5 Alpine Turbo (122B): Rear Brakes
R12G / R17G: Rear Brakes
A110: Big Rear Brakes
A310.4: Rear Brakes
Alpine A310...
In stock
For mounting with banjo bolts on front caliper Ø 3/8"-24UNF(+/- Ø 9.52mm)
In stock
This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts (Length under...
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Convient pour:
R8 / A110: Frein Arrière (Montage Type gros frein)
A310.4 (Tous modèles) : Frein Arrière
A310.6 (Avant 1980) : Frein Arrière
In stock
Suitable for:
R8 / A110 : Rear Brake (Big Brake Type Mounting)
A310.4 (All Models) : Rear Brake
A310 V6 (Before 1980) : Rear Brake
In stock
Suitable for:
R8 / A110: Rear Brake (Big Brake Mounting Type)
A310.4 (All Models): Rear Brake
A310.6 (Before 1980): Rear Brake
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock
Ideal for degreasing all your brake components or other mechanical parts.
Image for illustrative purposes only.
May vary depending on availability.
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
TRW paste is used for the repair, assembly, and preservation of hydraulic brake components, particularly brake calipers, which must be reassembled using special greases.
Compatible with all brake fluids for...
In stock
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock