Original "Lockheed" brand glass jar

• Material: mixed fibers, acrylic and wool
• Thickness: 6mm
• Width: 1 meter
• Sold by the linear meter

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.

• A M12x175 screw is required to secure the axle to the support.

Suitable for:

• R5 Alpine Atmo (1223) with prepared camshaft and engine
• R5 Alpine Turbo (122B)
• R5 Turbo (8220)

Possibility of mounting the pushrods in a naturally aspirated engine (R5 Alpine) by adjusting the pushrod screws.

• Steel pushrod EN-31 with heat treatment 60HRV