Running Train and Braking Performance R8 / R8G / R8S
Our spare parts for the front axle of your Renault R8 / R8S / R8G
Discover here a selection of parts and accessories specially designed to optimize the front axle of your Renault R8 / R8S / R8G. Whether you need new ball joints, reinforced control arms, high-performance anti-roll bars or other components, we have what you need to improve the handling and maneuverability of your vehicle.
Whether you are looking for quality silent blocks, sports shock absorbers, torsion bars, direct steering kits, or even high-performance wheel bearings, at AVP, Arnaud Ventoux Pièces, we offer you tailored solutions to strengthen and optimize the front end of your old Renault 8.
In stock
In stock
Out of stock
In stock
Out of stock
Suitable for:
- R8.G (R1134 / R1135) from 10/1964 to 1974
- Alpine A110: 1100cc / 1300cc / 1600cc / SC and SX (with Alpine A310 rear axle)
- Alpine GT4 / Matradjet
Versatile shock absorbers with road and rally...
In stock
Suitable for:
R8.G (R1134 / R1135) from 10/1964 to 1974
Alpine A110 (All models): 1100cc / 1300cc / 1600cc / SC and SX (With Alpine A310 rear axle)
Alpine GT4 / Matradjet
Shock absorber stiffness adjustment...
In stock
Designed to be mounted only with the original springs (wire Ø 12.5mm).
Sold individually.
In stock
Designed to be used only with original springs (12.5mm wire diameter).
Sold individually.
In stock
Out of stock
These bushings replace the original bushings; no modifications are required.
In stock
In stock
In stock
Can also fit on Caravelle and Floride S trumpets
In stock
Suitable for:
R8.G (R1134 / R1135) from 10/1964 to 1974
Alpine A110: 1100cc / 1300cc / 1600cc
Alpine GT4 (Rear crossmember with 4 shock absorbers)
Floride S and Caravelle from 06/1964 onwards... (Rear crossmember...
In stock
Suitable for:
R8.G (R1134 / R1135) from 10/1964 to 1974
Alpine A110 : 1100cm³ / 1300cm³ / 1600cm³ (except SX / SI and SC)
Shock absorber stiffness adjustment possible.
Versatile "sporty driving" shock absorbers,...
In stock
In stock
In stock
Out of stock
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
4CV: Drum brake (From 06/1953 until end of series)
Alpine A106: Drum brake
Dauphine (All models): Disc brake
Caravelle / Florida: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc brake
Matradjet:...
In stock
In stock
In stock
Suitable for front or rear (need 2 sets for one car)
Competition type pads, efficient in cold and high temperatures,
Friction coefficient of 0.43 µ,
Use reserved for competition, do not use these pads on public...
In stock
Come with x3 aviation brake hoses to replace copper pipes
Out of stock
Master Cylinder Specifications:
Piston Diameter: Ø 22.2mm
Number of Outlets / Threads: x2 / M10x100
Number of Outlets / Threads: x2 / M12x100
Mounting Center Distance: 60mm
Master Cylinder Sold Individually
In stock
Shim sold individually, 2 shims required to equip a front axle.
In addition to the aluminum shim for attaching the front caliper, a caliper yoke is required (not available in the AVP catalog)
WARNING: This assembly...
In stock
Washer sold individually
One washer allows the centering of a brake disc on the pivot
2 washers are required to equip a front or rear axle.
In stock
Kit includes: 4 screws, 8 washers, and 4 nuts
This kit allows you to install an aluminum shim on the pivot (right or left),
2 kits required per vehicle.
In stock
ATTENTION: Suitable for mounting "small" original brakes with original caliper and brake disc
Kit for mounting large wheel bearings on the rear axle, including:
2 Bearing carriers machined from 42CrMo4 hardened and...
In stock
ATTENTION: Suitable for "large" brake mounting with a 12mm thick disc and a non-offset brake caliper bracket identical to REF AVP 4377.
Kit for mounting large wheel bearings on the rear axle, including:
2 Bearing...
In stock
ATTENTION: straight, non-offset bracket for mounting a Bendix-type "big brake" caliper bracket
Brake bracket mounting hole spacing: 100mm
Original Alpine part number: 6000001437
Fixing with AVP4300 screws...
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
For mounting with banjo bolts on front caliper Ø 3/8"-24UNF(+/- Ø 9.52mm)
In stock
This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts (Length under...
In stock
Suitable for:
R8 / R8G / A110 : Front or rear disc (Big brake assembly)
A110 1600 SX (VH) : Front or rear disc
R16 (L / TL / TS) / R16TX : Front disc
A310.4 (No. 910 at the end of the series): Front disc
A310 V6 -...
Out of stock
Suitable for:
R8 / A110: Front Big Brakes
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
A310.4: Front Brakes
A310 V6 (Pre-1980): Front Brakes
R12 (All models): Front Brakes
R15 / R16 / R17 (All...
In stock
Suitable for:
R8 / A110: Rear Big Brake Assembly
R5 Alpine Turbo (122B): Rear Brake
A310.4: Rear Brake
A310 V6 (Pre-1980): Rear Brake
R12G / R17G: Rear Brake
Brake pads with a retaining stop (B in the diagram) must...
In stock
Suitable for the following vehicles:
R5 / R18 / R21 / R25 / R30 / : Rear Brakes
R8: Big Rear Brakes
R5 Alpine Turbo (122B): Rear Brakes
R12G / R17G: Rear Brakes
A110: Big Rear Brakes
A310.4: Rear Brakes
Alpine A310...
In stock
Key length: 51mm
Key width: 23.5mm
In stock
In stock
Out of stock
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock