Wheel nut group 4 galvanized steel - 90° cone - M12x125

• Distance between fixing screws :  83mm

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

• Compatible with Ducellier igniters with an inner body diameter of Ø 58.8mm
• WARNING: Not suitable for igniters with externally adjustable contact breakers (different plate attachment points)
• Supplied with 3 screws for attaching the plate

Suitable for:

• R8 (All models) / Caravelle / Floride S
• A110 (All models) / Alpine GT4
• Matradjet

This adjustable steering kit replaces the original "Fork" type steering rods.

To install the adjustable rods, it is necessary to remove the silent block of the rack eye and replace the steering bellows with the specific bellows AVP4620 (Included in the kit).