Click for more products.
No products were found.
Click for more products.
No products were found.
×
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 1
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 2
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 3
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 1
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 2
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 3
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 1
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 2
Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm - 3

Pair of front or rear "drilled and grooved" brake discs (right and left) - Ø 260mm x 7.5mm

Reference:
4456

Brake Disc Specifications:

  • Outer Diameter: Ø 260mm
  • Inner Centering Diameter: Ø 60mm
  • Mounting Hole Spacing: 71mm
  • Disc Offset: 33.5mm
  • Brake Disc Thickness: 7.5mm (Solid Disc)
  • Sold in pairs (2 discs)

Important: Brake discs have a specific mounting direction that must be observed. They are not interchangeable.

Installation direction of a solid, non-ventilated brake disc: The discs must be installed so that the edge of the grooves closest to the outer edge of the disc makes contact with the brake pad first.

For competition use only; do not use these discs on public roads.

Read moreShow less
€140.00 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Description

Advantages of drilled and slotted discs:

  • Compatible with competition brake pads (AVP4485) and standard brake pads (AVP4402 or AVP4403).
  • These brake discs have holes that promote heat dissipation and channels (slots) that allow the pads to be cleaned/dust removed with each braking action.
  • The slots also act as wear indicators. When a slot disappears completely, it means the disc is too worn to guarantee safe and effective braking and it's time to replace it.

Disadvantages of discs Drilled and grooved:

  • Faster brake pad wear
  • Microcracks due to wear or use may form between the disc holes.
  • Over time, a slight noise or whistling sound may appear.
Read moreShow less
Product Details
4456
You may also like
Customers who bought this product also bought:
Rear Brake Caliper Repair Kit - Ø 32mm (Round Seal) - 1 Rear Brake Caliper Repair Kit - Ø 32mm (Round Seal) - 1

  • This kit contains an M9 adjustment screw nut and an M8 nut
  • To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
  • A square symbol indicates a square seal, while a circle symbol indicates a round seal.
  • It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
  • We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
  • It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.
Reference: 4407
€12.00 (tax incl.)
Add to cart
In stock
Rear Brake Pad Set (Bendix Mounting) - Ferodo racing (DS 2500) - Competition use - 1 Rear Brake Pad Set (Bendix Mounting) - Ferodo racing (DS 2500) - Competition use - 1

Suitable for:

  • R8 / A110: Rear Big Brake Assembly
  • R5 Alpine Turbo (122B): Rear Brake
  • A310.4: Rear Brake
  • A310 V6 (Pre-1980): Rear Brake
  • R12G / R17G: Rear Brake

Brake pads with a retaining stop (B in the diagram) must be installed with this stop facing forward (in the direction of wheel rotation).

For competition use only. Do not use these brake pads on public roads.

Reference: 4470
€142.00 (tax incl.)
Add to cart
In stock
1

Please sign in first.

Sign in